TE Connectivity 3-2176074-5 Equivalent & Substitute Parts

Part Overview

The TE Connectivity 3-2176074-5 is a thin film chip resistor in the 0201 (0603 Metric) package with a resistance value of 13 kOhms and a tolerance of ±0.5%. This component is part of the CPF/Neohm series and is rated for 0.03W (1/32W) power dissipation. The part maintains Active product status and is RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. Equivalent and substitute parts are identified to provide design flexibility, inventory alternatives, and supply chain continuity for applications requiring this specific resistance value and package configuration.

Substiute Parts

3-2176074-5

TE Connectivity Passive ProductIn Stock: 8153-2176074-5 Datasheet

Current PartRFQ

RR0306P-133-D

SusumuIn Stock: 6101RR0306P-133-D Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the TE Connectivity 3-2176074-5 is determined by the following critical parameters:

Primary Substitution Criteria:

• Resistance value: 13 kOhms (exact match required)
• Tolerance: ±0.5% (exact match required)
• Package / Case: 0201 (0603 Metric) (exact match required)
• Composition: Thin Film (exact match required)
• Number of Terminations: 2 (exact match required)

Secondary Compatibility Parameters:

• RoHS3 compliance (required for regulatory alignment)
• MSL 1 rating (required for moisture sensitivity compatibility)
• Operating temperature range overlap
• Power rating (substitute must meet or exceed application requirements)

The Susumu RR0306P-133-D meets all primary substitution criteria and maintains regulatory compliance through RoHS3 certification and MSL 1 rating. This part is functionally equivalent for applications requiring the specified resistance, tolerance, and package configuration.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 3-2176074-5 is the primary component selection for applications requiring the specified 13 kOhm, ±0.5% thin film resistor in 0201 package. This part maintains Active product status with established supply availability and full RoHS3 compliance.

Susumu RR0306P-133-D serves as a direct functional equivalent for the TE Connectivity part. The substitute provides identical resistance, tolerance, and package specifications with the following considerations:

• Power rating of 0.05W (1/20W) exceeds the primary part's 0.03W rating, providing additional thermal margin in applications where power dissipation is a design factor.
• Temperature coefficient of ±25ppm/°C is superior to the primary part's ±50ppm/°C, offering improved stability across temperature variations.
• Operating temperature range of -55°C ~ 125°C is narrower than the primary part's -55°C ~ 155°C range; applications requiring operation above 125°C must use the TE Connectivity part.
• Physical dimensions are within acceptable tolerance for 0201 package specifications, with height-seated measurement of 0.010" (0.26mm) compared to 0.011" (0.28mm) for the primary part.
• RoHS3 compliance and MSL 1 rating ensure regulatory and environmental compatibility.

Selection between these parts depends on application-specific requirements for operating temperature range and thermal performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can the Susumu RR0306P-133-D replace the TE Connectivity 3-2176074-5 in all applications?

A: The Susumu part is functionally equivalent for applications operating within the -55°C ~ 125°C temperature range. Applications requiring operation above 125°C must use the TE Connectivity part, which is rated to 155°C.

Q: What is the significance of the different power ratings (0.03W vs. 0.05W)?

A: The Susumu substitute has a higher power rating of 0.05W compared to the TE Connectivity part's 0.03W. This provides additional thermal dissipation capability. The substitute can be used in applications designed for the lower power rating without derating concerns.

Q: Are the physical dimensions compatible for PCB assembly?

A: Both parts conform to the 0201 (0603 Metric) package standard. Dimensional variations (0.023" L x 0.011" W for TE Connectivity versus 0.024" L x 0.012" W for Susumu) fall within standard 0201 package tolerances and are compatible with standard PCB footprints designed for this package size.

Q: What does the temperature coefficient difference mean for circuit performance?

A: The Susumu part has a temperature coefficient of ±25ppm/°C compared to ±50ppm/°C for the TE Connectivity part. This means the Susumu resistor exhibits half the resistance change per degree Celsius, resulting in improved stability across temperature variations. Applications sensitive to resistance drift with temperature benefit from the Susumi part's superior temperature coefficient.

Q: Are both parts RoHS3 compliant?

A: Yes, both the TE Connectivity 3-2176074-5 and Susumu RR0306P-133-D are RoHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings, ensuring compatibility with modern manufacturing and environmental standards.

Q: What is the difference in REACH status between the two parts?

A: The TE Connectivity part lists REACH Status as "Vendor Undefined," while the Susumu part is marked as "REACH Unaffected." Both parts carry the same ECCN (EAR99) and HTSUS (8533.21.0030) classifications for export and tariff purposes.