TE Connectivity AMP Connectors 320561 Ring Terminal Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 320561 is an insulated ring terminal connector designed for circular stud applications. This component is classified as a PIDG series terminal with a 6 stud configuration, rated for 14-16 AWG wire gauges, and features crimp termination with serrated contact surfaces. The part maintains Active product status and is RoHS3 compliant. Substitute parts are identified to address packaging format variations and inventory availability while maintaining identical electrical and mechanical specifications.

Substiute Parts

320561

TE Connectivity AMP ConnectorsIn Stock: 742320561 Datasheet

Current PartRFQ

2-320561-2

TE Connectivity AMP ConnectorsIn Stock: 95642-320561-2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of TE Connectivity AMP Connectors ring terminals is determined by strict equivalence across the following critical parameters: terminal type (circular), stud size (6 stud), wire gauge range (14-16 AWG), termination method (crimp), insulation material (polyamide/nylon), contact material (copper), and contact finish (tin). The substitute part 2-320561-2 maintains complete electrical and mechanical compatibility with the primary part 320561. The only distinction between these parts is packaging format: the main part is supplied in Bulk packaging, while the substitute is supplied in Cut Tape (CT) packaging. Both parts are manufactured by TE Connectivity AMP Connectors within the PIDG series and carry identical dimensional specifications, insulation ratings, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both TE Connectivity AMP Connectors 320561 and 2-320561-2 are Active status components with full RoHS compliance. Selection between these parts is based on packaging requirements and inventory availability rather than electrical or mechanical performance differences. The 320561 in Bulk packaging is suitable for high-volume applications requiring loose component handling. The 2-320561-2 in Cut Tape packaging is appropriate for automated assembly processes and applications requiring tape-and-reel format delivery. Both parts satisfy identical functional requirements for 14-16 AWG wire termination on 6 stud circular connectors within the PIDG series. Compliance certifications, dimensional tolerances, and material specifications are equivalent across both part numbers.

Frequently Asked Questions (FAQ)

Q: Can 2-320561-2 be used as a direct replacement for 320561?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format: 320561 is supplied in Bulk, while 2-320561-2 is supplied in Cut Tape. Component performance, dimensions, wire gauge compatibility, and stud configuration are identical.

Q: What determines whether these parts are substitutable?

A: Substitutability is determined by matching terminal type (circular), stud size (6 stud), wire gauge range (14-16 AWG), termination method (crimp), insulation material (polyamide/nylon), contact material (copper), contact finish (tin), and dimensional specifications. Both parts meet all these criteria.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (Bulk versus Cut Tape) affects only handling, storage, and assembly process compatibility. Electrical and mechanical performance of the terminal itself is unaffected.

Q: Are both parts RoHS compliant?

A: Yes. The 320561 is RoHS3 compliant, and the 2-320561-2 is RoHS compliant. Both meet regulatory requirements for restricted substance limitations.

Q: What wire gauges are supported by these terminals?

A: Both parts support 14-16 AWG wire gauges with insulation diameter range of 0.105" to 0.150" (2.67mm to 3.81mm).

Q: Which part should be selected for automated assembly?

A: The 2-320561-2 in Cut Tape packaging is designed for automated assembly processes. The 320561 in Bulk packaging is suitable for manual assembly or high-volume loose component handling.

Q: Is the stud size the same for both parts?

A: Yes. Both parts feature a 6 stud configuration with identical dimensional specifications: 0.031" thickness, 0.250" width, and 0.703" overall length.