TE Connectivity AMP Connectors 3-1470213-6 Equivalent & Substitute Parts

Part Overview

The TE Connectivity AMP Connectors 3-1470213-6 is a rectangular connector header designed for through-hole mounting applications. This connector features a 36-position, 2-row configuration with 0.079" (2.00mm) pitch spacing, suitable for board-to-board or cable interconnections. The part operates within a temperature range of -40°C to 105°C and carries a current rating of 1A at 250VAC.

The 3-1470213-6 is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this connector specification.

Substiute Parts

3-1470213-6

TE Connectivity AMP ConnectorsIn Stock: 7733-1470213-6 Datasheet

Current PartRFQ

NRPN182PAEN-RC

Sullins Connector SolutionsIn Stock: 1185NRPN182PAEN-RC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the TE Connectivity 3-1470213-6 are identified based on strict electrical and mechanical compatibility criteria. The following parameters establish substitution eligibility:

Critical Matching Parameters:

• Connector Type: Header
• Contact Type: Male Pin
• Number of Positions: 36
• Number of Rows: 2
• Pitch - Mating: 0.079" (2.00mm)
• Row Spacing - Mating: 0.079" (2.00mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Operating Temperature Range: -40°C ~ 105°C
• Material Flammability Rating: UL94 V-0
• Contact Finish - Mating: Gold

The Sullins Connector Solutions NRPN182PAEN-RC satisfies all critical matching parameters and is classified as an active product, providing current availability and ongoing manufacturer support.

Parameter Comparison

Engineering Selection Recommendations

The Sullins Connector Solutions NRPN182PAEN-RC is a direct functional equivalent for the obsolete TE Connectivity 3-1470213-6. Both connectors share identical pitch spacing, position count, row configuration, mounting methodology, and operating temperature specifications.

The NRPN182PAEN-RC offers the advantage of active product status, ensuring ongoing availability and manufacturer support. The substitute part carries ROHS3 compliance certification, whereas the original part lists RoHS status as not applicable. Both parts are classified under the same ECCN and HTSUS codes.

Electrical performance differences exist between the two parts. The NRPN182PAEN-RC supports a higher current rating of 2A compared to the original 1A specification, and operates at 150V versus the original 250VAC rating. These differences do not preclude substitution in applications where the original 1A/250VAC specification was not a limiting design constraint.

Physical dimensional variations occur in contact length and insulation height. The NRPN182PAEN-RC contact length measures 0.141" (3.60mm) versus 0.157" (4.00mm) for the original, and insulation height measures 0.079" (2.00mm) versus 0.059" (1.50mm). These dimensional differences require verification against mating connector specifications and PCB layout constraints prior to implementation.

Frequently Asked Questions (FAQ)

Q: Can the Sullins NRPN182PAEN-RC directly replace the TE Connectivity 3-1470213-6 in existing designs?

A: The NRPN182PAEN-RC matches all critical electrical and mechanical parameters including pitch, position count, row configuration, mounting type, and operating temperature range. However, dimensional differences in contact length and insulation height require verification against mating connector specifications and PCB layout requirements before implementation.

Q: What are the key differences between these two connector models?

A: The primary differences are: (1) Contact length: 0.141" (3.60mm) for NRPN182PAEN-RC versus 0.157" (4.00mm) for 3-1470213-6; (2) Insulation height: 0.079" (2.00mm) for NRPN182PAEN-RC versus 0.059" (1.50mm) for 3-1470213-6; (3) Current rating: 2A for NRPN182PAEN-RC versus 1A for 3-1470213-6; (4) Voltage rating: 150V for NRPN182PAEN-RC versus 250VAC for 3-1470213-6; (5) Contact material: Brass for NRPN182PAEN-RC versus Copper Alloy for 3-1470213-6; (6) Insulation material: Polyamide (PA6T), Nylon 6T for NRPN182PAEN-RC versus Thermoplastic for 3-1470213-6.

Q: Is the NRPN182PAEN-RC suitable for applications requiring 250VAC operation?

A: The NRPN182PAEN-RC is rated for 150V operation. Applications requiring 250VAC operation must evaluate whether this voltage rating is compatible with system requirements. The original 3-1470213-6 specification of 250VAC should be considered a design constraint.

Q: What is the current availability status of these connectors?

A: The TE Connectivity 3-1470213-6 is classified as obsolete. The Sullins NRPN182PAEN-RC is classified as active, indicating current manufacturer production and ongoing availability.

Q: Are both connectors RoHS compliant?

A: The Sullins NRPN182PAEN-RC is ROHS3 compliant. The TE Connectivity 3-1470213-6 lists RoHS status as not applicable. Applications subject to RoHS requirements should utilize the NRPN182PAEN-RC.

Q: What packaging format is available for the NRPN182PAEN-RC?

A: The NRPN182PAEN-RC is supplied in bulk packaging.