TE Connectivity Potter & Brumfield Relays 3-1416200-7 Equivalent & Substitute Parts

Part Overview

The TE Connectivity Potter & Brumfield Relays 3-1416200-7 is a General Purpose Relay with SPST-NO (1 Form A) contact configuration and 24VDC coil voltage. This through-hole mounted relay is designed for general-purpose switching applications with a maximum switching voltage of 400VAC and contact rating of 10A.

The 3-1416200-7 carries an Obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this relay specification.

Substiute Parts

3-1416200-7

TE Connectivity Potter & Brumfield RelaysIn Stock: 11713-1416200-7 Datasheet

Current PartRFQ

5-1416200-8

TE Connectivity Potter & Brumfield RelaysIn Stock: 9745-1416200-8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 3-1416200-7 is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Coil Voltage: 24VDC
• Contact Form: SPST-NO (1 Form A)
• Contact Rating (Current): 10 A
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Coil Current: 10.6 mA
• Coil Resistance: 2.27 kOhms
• Operating Temperature Range: -40°C ~ 85°C
• Seal Rating: Sealed - Flux Protection
• Coil Type: Non Latching

The substitute part 5-1416200-8 meets all mandatory matching parameters. Variations in contact material (Silver Cadmium Oxide versus Silver Nickel), operate time, and release time do not preclude substitution when electrical and mechanical specifications remain within design tolerance.

Parameter Comparison

Engineering Selection Recommendations

The substitute part 5-1416200-8 is the direct equivalent for the obsolete 3-1416200-7. Selection of the 5-1416200-8 is supported by the following factors:

Product Status: The 5-1416200-8 maintains Active product status, ensuring continued availability and manufacturer support. The 3-1416200-7 is classified as Obsolete, making the 5-1416200-8 the appropriate selection for new designs and ongoing production.

Compliance and Certifications: The 5-1416200-8 is RoHS3 Compliant and REACH Unaffected, meeting current regulatory requirements. Both parts share identical ECCN classification (EAR99) and equivalent MSL rating (1 - Unlimited).

Electrical and Mechanical Equivalence: All critical electrical parameters, mechanical specifications, and functional characteristics are identical between the two parts. The differences in contact material (Silver Nickel versus Silver Cadmium Oxide), operate time (10 ms versus 6 ms), and release time (5 ms versus 2.5 ms) do not affect functional substitution for general-purpose relay applications.

Series Continuity: Both parts belong to the V23061 AXICOM series, confirming design family compatibility and pinout equivalence.

Frequently Asked Questions (FAQ)

Q: Can the 5-1416200-8 be used as a direct replacement for the 3-1416200-7 in existing designs?

A: Yes. The 5-1416200-8 is electrically and mechanically equivalent to the 3-1416200-7. All critical parameters including coil voltage, contact form, current rating, mounting type, and termination style are identical. The parts are interchangeable for through-hole PCB applications.

Q: What is the difference in contact material between these two parts?

A: The 3-1416200-7 uses Silver Cadmium Oxide (AgCdO) contact material, while the 5-1416200-8 uses Silver Nickel (AgNi). Both materials are suitable for general-purpose switching applications at the specified 10A contact rating and 400VAC maximum switching voltage.

Q: Why are the operate and release times different?

A: The 3-1416200-7 has an operate time of 6 ms and release time of 2.5 ms, while the 5-1416200-8 has an operate time of 10 ms and release time of 5 ms. These timing differences do not affect substitution for general-purpose relay applications where switching speed is not a critical design parameter.

Q: Is the 5-1416200-8 available in the same packaging as the 3-1416200-7?

A: The 3-1416200-7 is supplied with standard packaging, while the 5-1416200-8 is supplied in Bulk packaging. Both parts use identical PC Pin termination and through-hole mounting, ensuring compatibility with existing PCB designs.

Q: What compliance certifications apply to the 5-1416200-8?

A: The 5-1416200-8 is RoHS3 Compliant and REACH Unaffected. Both parts share the same ECCN classification (EAR99) and MSL rating (1 - Unlimited).

Q: Why is the 3-1416200-7 listed as Obsolete?

A: The 3-1416200-7 has reached end-of-life status. The 5-1416200-8 is the active equivalent part maintained by TE Connectivity Potter & Brumfield Relays for continued supply and support.

Q: Are there any design considerations when switching from the 3-1416200-7 to the 5-1416200-8?

A: No design changes are required. The parts are pin-compatible and functionally equivalent. The coil voltage, current requirements, and electrical characteristics are identical, allowing direct substitution without circuit modification.