30N06 N-Channel MOSFET Equivalent & Substitute Parts

Part Overview

The 30N06 is an N-Channel MOSFET manufactured by UMW, designed for surface mount applications in the TO-252 (DPAK) package. This device operates at 60V drain-to-source voltage with a continuous drain current rating of 30A at 25°C and maximum power dissipation of 55W. The part is currently in active production status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Substitute parts are identified when equivalent electrical performance and mechanical compatibility are maintained across critical parameters including voltage rating, current capacity, on-resistance characteristics, and package configuration. Identifying qualified substitutes ensures design flexibility and supply chain continuity.

Substiute Parts

30N06

UMWIn Stock: 1027130N06 Datasheet

Current PartRFQ

STD30NF06L

UMWIn Stock: 15441STD30NF06L Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 30N06 MOSFET is determined by equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Drain-to-Source Voltage (Vdss): 60V minimum
• Continuous Drain Current (Id) @ 25°C: 30A minimum
• On-Resistance (Rds On) @ 15A, 10V: 29mOhm maximum
• Gate Threshold Voltage (Vgs(th)): 2.5V maximum @ 250µA
• Gate Charge (Qg): 25nC maximum @ 10V
• Input Capacitance (Ciss): 1562pF maximum @ 25V
• Maximum Gate Voltage (Vgs): ±20V minimum
• Power Dissipation (Max): 55W minimum

Mechanical Equivalence Criteria:

• Mounting Type: Surface Mount
• Package Configuration: TO-252-3 (DPAK with 2 Leads + Tab)
• Physical Footprint: SC-63 designation

Compliance Equivalence Criteria:

• RoHS3 Compliance required
• Moisture Sensitivity Level: MSL 1 (Unlimited)

The STD30NF06L meets all electrical, mechanical, and compliance requirements and qualifies as a parametric equivalent substitute.

Parameter Comparison

Engineering Selection Recommendations

Both the 30N06 and STD30NF06L are manufactured by UMW and maintain active production status. Selection between these parts is based on packaging format and inventory availability rather than electrical or thermal performance differences.

30N06 (Tape & Reel Packaging): Suitable for high-volume automated assembly operations where components are supplied in continuous tape format on reels. Current inventory: 10,165 pieces.

STD30NF06L (Cut Tape & Digi-Reel® Packaging): Suitable for mixed-volume production environments and applications requiring flexible packaging options. Current inventory: 15,365 pieces.

Both parts satisfy RoHS3 compliance requirements and MSL 1 (unlimited) moisture sensitivity specifications. Electrical performance, thermal characteristics, and mechanical compatibility are identical across all specified parameters. PCB layout, thermal management design, and gate drive circuitry require no modification when substituting between these parts.

Frequently Asked Questions (FAQ)

Q: Can STD30NF06L be used as a direct replacement for 30N06 in existing designs?

A: Yes. The STD30NF06L is electrically and mechanically equivalent to the 30N06. All electrical parameters, including voltage rating, current capacity, on-resistance, and gate characteristics, are identical. The TO-252 (DPAK) package footprint is identical, requiring no PCB layout modifications.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel (TR) packaging supplies components in continuous tape format on full reels, optimized for high-speed automated pick-and-place assembly. Cut Tape & Digi-Reel® packaging provides components in cut tape segments or alternative reel formats, suitable for lower-volume production and mixed-component assembly operations. Electrical and mechanical specifications remain identical.

Q: Are there any thermal management differences between these parts?

A: No. Both parts have identical maximum power dissipation ratings of 55W (Tc) and identical operating temperature ranges of -55°C to 150°C (TJ). Thermal design considerations, including heatsink requirements and PCB copper area calculations, remain unchanged.

Q: Do these parts require different gate drive voltage levels?

A: No. Both parts have identical gate threshold voltage (Vgs(th)) of 2.5V maximum @ 250µA and identical maximum gate voltage (Vgs) of ±20V. Gate drive circuitry requires no modification.

Q: Are both parts RoHS3 compliant?

A: Yes. Both the 30N06 and STD30NF06L are RoHS3 compliant with MSL 1 (unlimited) moisture sensitivity level, meeting environmental and regulatory requirements for commercial and industrial applications.

Q: What is the on-resistance specification for these MOSFETs?

A: Both parts have identical on-resistance (Rds On) of 29mOhm maximum when measured at 15A drain current and 10V gate-source voltage. This specification determines conduction losses and thermal performance in switching applications.

Q: Can these parts be used interchangeably in high-frequency switching applications?

A: Yes. Both parts have identical gate charge (Qg) of 25nC maximum @ 10V and identical input capacitance (Ciss) of 1562pF maximum @ 25V. Switching frequency performance and gate drive power requirements are identical.