30KP60CA-TP Equivalent & Substitute Parts

Part Overview

The 30KP60CA-TP is a bidirectional Transient Voltage Suppressor (TVS) diode manufactured by Micro Commercial Co, designed for general-purpose overvoltage protection applications. This through-hole axial component operates across a temperature range of -55°C to 175°C and is ROHS3 compliant. The part is currently active in production with 811 units in stock. Substitute parts are necessary when the original part becomes unavailable, when alternative packaging formats are required, or when different power dissipation ratings better match application requirements.

Substiute Parts

30KP60CA-TP

Micro Commercial CoIn Stock: 83130KP60CA-TP Datasheet

Current PartRFQ

30KPA60CA

MDE Semiconductor IncIn Stock: 162930KPA60CA Datasheet

DirectRFQ

15KPA60CA

MDE Semiconductor IncIn Stock: 6279115KPA60CA Datasheet

SimilarRFQ

5KP60CA

Littelfuse Inc.In Stock: 48005KP60CA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 30KP60CA-TP is determined by the following critical electrical and mechanical parameters:

Electrical Compatibility Requirements:

• Voltage - Reverse Standoff (Typ): 60V
• Voltage - Breakdown (Min): 67V
• Voltage - Clamping (Max) @ Ipp: 102V (±tolerance acceptable)
• Bidirectional Channels: 1
• Type: Zener

Mechanical Compatibility Requirements:

• Mounting Type: Through Hole
• Package / Case: Axial configuration (R-6, P600)

Environmental & Compliance Requirements:

• Operating Temperature: -55°C ~ 175°C (TJ)
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

The substitute parts listed below maintain identical voltage specifications and thermal operating ranges. Variations in power dissipation rating (30kW, 15kW, 5kW) and peak pulse current are acceptable substitutions when application requirements permit lower power handling. Packaging format differences (Tape & Reel vs. Bulk vs. Cut Tape) do not affect electrical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts maintain ROHS3 compliance and MSL Level 1 rating, ensuring compatibility with standard manufacturing and storage conditions. All parts are active products with confirmed inventory availability.

30KPA60CA provides direct electrical equivalence with identical 30kW peak pulse power rating and 102V clamping voltage. This part is the primary substitute when exact power handling capacity must be maintained. Packaging format differs (Bulk vs. Tape & Reel), which may affect procurement and assembly workflows.

15KPA60CA maintains voltage specifications within acceptable tolerance (97.4V clamping vs. 102V) and reduces peak pulse power to 15kW. This substitute is suitable for applications where transient energy levels are lower than the original design specification. Significantly higher inventory availability (62,705 units) may provide supply chain advantages.

5KP60CA maintains voltage specifications within acceptable tolerance (96.8V clamping vs. 102V) and reduces peak pulse power to 5kW. This substitute is suitable for low-energy transient protection applications. Different manufacturer (Littelfuse Inc.) and packaging format (Cut Tape) should be evaluated against procurement requirements.

Frequently Asked Questions (FAQ)

Q: Can 30KPA60CA directly replace 30KP60CA-TP? A: Yes. Both parts share identical voltage ratings (60V standoff, 102V clamping) and 30kW power dissipation. The primary difference is packaging format (Bulk vs. Tape & Reel) and supplier device package designation (P600 vs. R-6). Electrical performance is equivalent.

Q: What is the difference between the 30kW, 15kW, and 5kW variants? A: Power rating indicates peak pulse power dissipation capacity. The 30kW variant (30KPA60CA) handles the highest transient energy. The 15kW (15KPA60CA) and 5kW (5KP60CA) variants are suitable for applications with lower transient energy requirements. All maintain identical voltage protection thresholds.

Q: Are the clamping voltage differences between 102V, 97.4V, and 96.8V significant? A: These variations fall within normal manufacturing tolerance for TVS diodes. All values remain within the specified voltage protection window. Selection depends on application sensitivity to clamping voltage variation. The 30KPA60CA provides the tightest specification at 102V.

Q: Can I use a lower power-rated substitute in a high-energy application? A: No. Using a lower power-rated TVS diode in an application designed for higher transient energy may result in component failure or inadequate protection. Power rating must match or exceed application requirements.

Q: Does package format affect electrical performance? A: No. R-6 and P600 axial packages are mechanically different but electrically equivalent. Package selection is determined by PCB layout, assembly equipment compatibility, and procurement preferences.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL Level 1 rating, ensuring compatibility with standard manufacturing processes and environmental requirements.