30KP30CA-TP Transient Voltage Suppressor - Equivalent & Substitute Parts

Part Overview

The 30KP30CA-TP is a bidirectional Zener transient voltage suppressor (TVS) diode manufactured by Micro Commercial Co, designed for general-purpose overvoltage protection applications. This through-hole component features a 30V reverse standoff voltage with a 55.2V maximum clamping voltage and 30kW peak pulse power rating. The part is currently in active production status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Substitute parts are identified based on matching core electrical parameters: 30V reverse standoff voltage, through-hole axial mounting, bidirectional Zener topology, and general-purpose application suitability.

Substiute Parts

30KP30CA-TP

Micro Commercial CoIn Stock: 80630KP30CA-TP Datasheet

Current PartRFQ

30KPA30CA

MDE Semiconductor IncIn Stock: 180330KPA30CA Datasheet

DirectRFQ

15KPA30CA

MDE Semiconductor IncIn Stock: 128715KPA30CA Datasheet

SimilarRFQ

5KP30CA

Diotec SemiconductorIn Stock: 41935KP30CA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 30KP30CA-TP are qualified based on the following electrical and mechanical compatibility criteria:

Primary Matching Parameters:

• Voltage - Reverse Standoff: 30V (±tolerance)
• Voltage - Breakdown (Min): 33.3V to 34.61V range
• Type: Zener, Bidirectional, single channel
• Mounting Type: Through Hole, Axial package
• Applications: General Purpose
• Operating Temperature Range: -55°C minimum to 175°C maximum
• RoHS3 Compliance: Required

Substitution Grouping:

Direct Equivalent (30KPA30CA): Matches all primary electrical parameters with identical 30V standoff, 55.2V clamping voltage, and 30kW power rating. Differs only in packaging format (Bulk vs. Tape & Reel) and manufacturer (MDE Semiconductor Inc).

Similar Substitute (15KPA30CA): Maintains 30V standoff voltage and identical operating temperature range. Differs in peak pulse power (15kW vs. 30kW) and clamping voltage (50.7V vs. 55.2V). Suitable for applications with lower transient energy requirements.

Similar Substitute (5KP30CA): Maintains 30V standoff voltage and through-hole axial mounting. Differs in peak pulse power (5kW vs. 30kW), clamping voltage (48.4V vs. 55.2V), and minimum operating temperature (-50°C vs. -55°C). Suitable for low-energy transient protection applications.

Parameter Comparison

Engineering Selection Recommendations

30KPA30CA (Direct Equivalent): This part is the primary substitute for the 30KP30CA-TP. Both components share identical electrical specifications (30V standoff, 55.2V clamping, 30kW power rating) and full ROHS3 compliance. The only difference is packaging format and manufacturer. This substitute is suitable for direct replacement in applications where the original part is unavailable.

15KPA30CA (Similar Substitute): This part maintains the 30V standoff voltage and full operating temperature range (-55°C to 175°C) with ROHS3 compliance. It is suitable for applications where peak transient energy is limited to 15kW or lower. The reduced clamping voltage (50.7V) and peak pulse current (297.8A) must be evaluated against circuit protection requirements.

5KP30CA (Similar Substitute): This part maintains the 30V standoff voltage with ROHS3 compliance. It is suitable only for low-energy transient protection applications with peak pulse power limited to 5kW. The minimum operating temperature is -50°C (versus -55°C for the main part), which may be a limiting factor in extreme cold environments. The reduced clamping voltage (48.4V) and peak pulse current (103A) require circuit-level evaluation.

All substitute parts are active production components with established supply availability and full regulatory compliance documentation.

Frequently Asked Questions (FAQ)

Q: Can 30KPA30CA be used as a direct replacement for 30KP30CA-TP?

A: Yes. Both parts have identical electrical specifications: 30V reverse standoff voltage, 55.2V clamping voltage, and 30kW peak pulse power rating. Both are ROHS3 compliant and rated for -55°C to 175°C operation. The difference is packaging format (Bulk vs. Tape & Reel) and manufacturer. Verify that your procurement and assembly processes accommodate the different packaging.

Q: What is the difference between the 30KP30CA-TP and 15KPA30CA?

A: The 15KPA30CA has half the peak pulse power rating (15kW vs. 30kW) and a lower clamping voltage (50.7V vs. 55.2V). Both maintain the 30V standoff voltage and full operating temperature range. Use 15KPA30CA only if your circuit transient energy is confirmed to be below 15kW.

Q: Can 5KP30CA replace 30KP30CA-TP in all applications?

A: No. The 5KP30CA has significantly lower peak pulse power (5kW vs. 30kW), lower clamping voltage (48.4V vs. 55.2V), and a higher minimum operating temperature (-50°C vs. -55°C). Use 5KP30CA only for low-energy transient protection where peak pulse power does not exceed 5kW and minimum operating temperature is above -50°C.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts (30KPA30CA, 15KPA30CA, and 5KP30CA) are ROHS3 compliant, matching the compliance status of the 30KP30CA-TP.

Q: What is the difference between R-6 and P600 package formats?

A: R-6 and P600 are both axial through-hole packages for TVS diodes. The difference is in physical dimensions and lead configuration. Verify that your PCB footprint and assembly equipment are compatible with the substitute part's package format before procurement.

Q: Do all substitute parts have the same operating temperature range?

A: No. The 30KPA30CA and 15KPA30CA are rated -55°C to 175°C, matching the main part. The 5KP30CA is rated -50°C to 175°C, with a higher minimum temperature limit. This may be a constraint in applications requiring operation below -50°C.

Q: What inventory levels are available for each substitute?

A: 30KPA30CA: 1705 pcs; 15KPA30CA: 1200 pcs; 5KP30CA: 4100 pcs. Inventory levels are subject to change and should be confirmed with the supplier.