Phoenix Contact 3076219 CLIPLINE RBO Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3076219 is a 2-position NEMA open construction terminal block with a 41.0mm width, designed for bolt and nut termination. This component is classified as obsolete, which necessitates identification of active equivalent parts to maintain system continuity and ensure ongoing availability for new installations and replacements.

Substiute Parts

3076219

Phoenix ContactIn Stock: 11443076219 Datasheet

Current PartRFQ

3244614

Phoenix ContactIn Stock: 11363244614 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The Phoenix Contact 3244614 qualifies as a direct substitute for the 3076219 based on the following critical parameters:

• Identical electrical specifications: Both parts maintain 309 A (IEC) and 310 A (UL) current ratings with 1 kV voltage ratings
• Matching mechanical configuration: 2-position, 41.0mm terminal width, bolt and nut termination
• Equivalent wire gauge compatibility: 6-150mm² (350MCM-10 AWG) range
• Same physical dimensions: 144.00mm length and 84.50mm maximum height
• Identical insulation material and flammability: Polyamide (PA), Nylon with UL94 V-0 rating
• Same mounting interface: DIN Rail mounting type
• Active product status: The 3244614 is currently active, providing long-term availability

The substitution is based strictly on electrical and mechanical parameter equivalence within the CLIPLINE RBO series.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3244614 is the direct equivalent for the obsolete 3076219. Selection of the 3244614 is supported by:

• Electrical equivalence: Identical current and voltage ratings under both IEC and UL standards
• Mechanical compatibility: Matching terminal configuration, dimensions, and DIN Rail mounting interface
• Material and safety compliance: Identical insulation material and UL94 V-0 flammability rating
• Active product status: The 3244614 is currently in production, ensuring availability and long-term supply chain stability
• Enhanced compliance: The 3244614 carries ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements

No technical performance degradation occurs with this substitution. The parts are functionally and physically interchangeable within the CLIPLINE RBO series.

Frequently Asked Questions (FAQ)

Q: Can the 3244614 be used as a direct replacement for the 3076219?

A: Yes. Both parts are identical in electrical ratings (309 A IEC, 310 A UL, 1 kV), mechanical configuration (2-position, 41.0mm width, bolt and nut termination), and physical dimensions. They are functionally interchangeable.

Q: What is the primary reason for substitution?

A: The 3076219 is classified as obsolete. The 3244614 is the active equivalent within the CLIPLINE RBO series, providing continued availability and supply chain reliability.

Q: Are the wire gauge ranges identical?

A: Yes. Both parts accept 6-150mm² (350MCM-10 AWG) wire gauges without restriction.

Q: Does the packaging differ between these parts?

A: The 3076219 was supplied with unspecified packaging, while the 3244614 is supplied in bulk packaging. This does not affect electrical or mechanical performance.

Q: Are there compliance differences?

A: The 3244614 carries ROHS3 compliance and REACH unaffected status, representing current regulatory alignment. Both parts maintain UL94 V-0 flammability rating and are suitable for industrial applications.

Q: Is DIN Rail mounting identical?

A: Yes. Both parts use the same DIN Rail mounting interface with no modification required for installation.