Phoenix Contact 3074965 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3074965 is a 1-position terminal block featuring bolt/screw clamp wire entry at 90° to the panel. This component is part of the CLIPLINE RW series and is designed for panel-mount applications with dual-piece snap lock installation. The part is currently obsolete, making identification of suitable substitute components essential for ongoing system maintenance and new design implementations.

Substiute Parts

3074965

Phoenix ContactIn Stock: 7963074965 Datasheet

Current PartRFQ

0717364

Phoenix ContactIn Stock: 10460717364 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 3074965 is determined by the following critical parameters:

• Electrical Ratings: Voltage (600 V UL) and current capacity must meet or exceed the original specification
• Mechanical Configuration: Single position, bolt/screw clamp connection type, 90° wire entry orientation
• Panel Mount Interface: 2-piece mounting system compatibility
• Physical Dimensions: Width and panel thickness accommodation range
• Connector Type: Gray color and engagement pin feature consistency
• Compliance: RoHS compliance status

The substitute part Phoenix Contact 0717364 maintains functional equivalence through matching electrical ratings, connection methodology, and compliance certifications, while operating within the defined mechanical and dimensional parameters for this terminal block category.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 0717364 serves as a functional substitute for the obsolete 3074965 based on the following engineering criteria:

Electrical Compatibility: Both components maintain 600 V UL voltage rating. The substitute operates at 230 A current capacity compared to the original 309 A specification. Current capacity reduction must be evaluated against circuit requirements.

Mechanical Compatibility: Both components feature identical bolt/screw clamp connection methodology with 90° wire entry orientation and single-position configuration. The 2-piece mounting system is compatible across both parts.

Compliance Status: The substitute part 0717364 maintains active product status with current RoHS compliance certification, ensuring ongoing availability and regulatory alignment.

Dimensional Considerations: The substitute exhibits reduced width (0.984" versus 1.661") and narrower panel thickness accommodation range (0.039 ~ 0.236" versus 0.079 ~ 0.315"). Panel integration feasibility must be confirmed for specific installation geometries.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 0717364 directly replace 3074965 in all applications?

A: Substitution is valid where circuit current requirements do not exceed 230 A and panel thickness falls within 0.039 ~ 0.236" (1.0 ~ 6.0 mm). Dimensional differences in width and panel thickness range require verification for specific panel configurations.

Q: What is the primary difference between these two terminal blocks?

A: The primary differences are current rating (309 A versus 230 A), physical width (1.661" versus 0.984"), and panel thickness accommodation range. Both maintain identical voltage rating, connection type, and mounting methodology.

Q: Are both parts RoHS compliant?

A: Yes, both the original 3074965 and substitute 0717364 are RoHS compliant components.

Q: Why is the original part obsolete?

A: The 3074965 is classified as obsolete. The active substitute 0717364 from the CLIPLINE HDFK series provides equivalent functionality with current product support.

Q: Does packaging differ between these parts?

A: The original 3074965 packaging specification is not provided. The substitute 0717364 is supplied in bulk packaging.

Q: What wire gauge does the substitute support?

A: The substitute 0717364 supports 4 AWG wire gauge.