307-006-532-101 Card Edge Connector Equivalent & Substitute Parts

Part Overview

The 307-006-532-101 is a 6-position female card edge connector manufactured by Mercury United Electronics, Inc., designed for single edge card applications with 0.156" (3.96mm) pitch spacing. This connector features gold-plated copper nickel tin alloy contacts and operates across the temperature range of -40°C to 105°C. The part is classified as obsolete, making identification of compatible substitute components essential for ongoing system support and procurement planning.

Substiute Parts

307-006-532-101

Mercury United Electronics, Inc.In Stock: 1017307-006-532-101 Datasheet

Current PartRFQ

307-006-525-101

Mercury United Electronics, Inc.In Stock: 1157307-006-525-101 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The 307-006-525-101 qualifies as a direct substitute for the 307-006-532-101 based on the following critical parameters that determine functional compatibility:

• Number of Positions: Both parts feature 6 positions
• Gender: Both are female connectors
• Pitch: Both maintain 0.156" (3.96mm) spacing
• Card Type: Both are single edge, non-specified card type connectors
• Contact Material & Finish: Both use gold-plated contacts with copper alloy base material
• Operating Temperature Range: Both operate from -40°C to 105°C
• Insulation Material: Both use polyester thermoplastic
• Compliance: Both are ROHS3 compliant and REACH unaffected

The primary distinction is that 307-006-525-101 is an active product with specified card thickness tolerance (0.054" to 0.070"), solder termination, and semi-bellows contact type, whereas 307-006-532-101 is obsolete with a fixed card thickness of 0.062".

Parameter Comparison

Engineering Selection Recommendations

The 307-006-525-101 is the appropriate substitute for the obsolete 307-006-532-101. Both connectors maintain identical electrical and mechanical interface specifications for 6-position, 0.156" pitch single edge card applications. The substitute part is currently in active production status with 1117 units in stock, compared to the obsolete main part with 959 units available.

Both parts satisfy ROHS3 compliance and REACH requirements, ensuring regulatory alignment for new designs and legacy system support. The substitute's card thickness tolerance range (0.054" to 0.070") encompasses the main part's fixed thickness of 0.062", confirming mechanical compatibility with existing card edge designs.

Frequently Asked Questions (FAQ)

Q: Can 307-006-525-101 directly replace 307-006-532-101 in existing applications?

A: Yes. Both connectors share identical position count, pitch, gender, and operating temperature specifications. The substitute's card thickness tolerance range includes the main part's specification, ensuring mechanical fit with existing card edge designs.

Q: What is the primary difference between these two parts?

A: The main part (307-006-532-101) is obsolete with unspecified termination and contact type. The substitute (307-006-525-101) is an active product with specified solder termination, semi-bellows contact type, and documented card thickness tolerance of 0.054" to 0.070".

Q: Are there compliance differences between the two parts?

A: No. Both parts are ROHS3 compliant and REACH unaffected, maintaining identical regulatory status.

Q: What packaging is available for the substitute part?

A: The 307-006-525-101 is supplied in bulk packaging with 1117 units currently in stock.

Q: Does the substitute part support the same operating temperature range?

A: Yes. Both parts operate across -40°C to 105°C, maintaining identical thermal specifications.