Phoenix Contact 3056190 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3056190 is a 1-position terminal block featuring bolt/screw clamp wire entry at 90° to the panel. This component is part of the CLIPLINE RW series and is classified as obsolete. The part operates at 600 V UL and 65 A, designed for panel-mount applications with 2-piece construction. Due to its obsolete status, identifying active equivalent parts is essential for ongoing procurement and system maintenance.

Substiute Parts

3056190

Phoenix ContactIn Stock: 10603056190 Datasheet

Current PartRFQ

0709864

Phoenix ContactIn Stock: 6850709864 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Phoenix Contact 3056190 is based on the following critical parameters that must remain consistent:

• Electrical Specifications: Voltage rating (600 V UL) and current rating (65 A) must be maintained
• Mechanical Configuration: 1 position per level, 2-piece panel mount construction
• Wire Connection Type: Bolt/screw clamp with 90° wire entry to panel
• Color: Gray finish
• Compliance: RoHS compliance status

The substitute part Phoenix Contact 0709864 satisfies all these core requirements while offering the advantage of active product status and improved availability.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 0709864 serves as the active equivalent for the obsolete 3056190. Both parts maintain identical electrical specifications (600 V UL, 65 A) and functional configuration (1-position, 2-piece panel mount, bolt/screw clamp connection). The substitute part is ROHS3 compliant, representing current environmental standards compliance. The primary dimensional difference is the reduced width (0.398" versus 0.642") and narrower panel thickness tolerance range (1.0 ~ 4.0 mm versus 1.0 ~ 6.0 mm) of the substitute part. Panel thickness compatibility must be verified for the specific application before selection.

Frequently Asked Questions (FAQ)

Q: Can Phoenix Contact 0709864 directly replace 3056190 in existing installations?

A: Electrical and functional compatibility is confirmed. Physical installation compatibility depends on panel thickness and available mounting space. The substitute part accommodates panel thicknesses from 1.0 to 4.0 mm, while the original part supports 1.0 to 6.0 mm. Verify panel thickness specifications before installation.

Q: What is the significance of the series change from CLIPLINE RW to CLIPLINE HDFK?

A: The series designation indicates different product lines within Phoenix Contact's terminal block portfolio. Both series maintain the same electrical ratings and mechanical interface for this 1-position configuration.

Q: Are there compliance differences between the two parts?

A: The original part is RoHS Compliant. The substitute part is ROHS3 Compliant, representing compliance with the current RoHS 3 directive. Both parts carry the same ECCN (EAR99) and HTSUS (8536.69.4030) classifications.

Q: What wire gauges are compatible with the substitute part?

A: The Phoenix Contact 0709864 supports 6-24 AWG wire gauges. Wire gauge specifications for the original part were not provided in the technical documentation.

Q: How does the width difference affect application suitability?

A: The substitute part is narrower (0.398" versus 0.642"), which may provide space advantages in compact panel layouts. Verify that the reduced width accommodates the intended panel configuration and adjacent component spacing.