Phoenix Contact 3048535 Terminal Block Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3048535 is a feed-through terminal block connector designed for 10-30 AWG wire gauges with a 3-position configuration. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The CLIPLINE UK series provides screw-type termination with rated performance across both IEC and UL standards.

Substiute Parts

3048535

Phoenix ContactIn Stock: 11083048535 Datasheet

Current PartRFQ

1923021

Phoenix ContactIn Stock: 9121923021 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 3048535 is determined by strict equivalence across the following critical parameters:

• Same manufacturer (Phoenix Contact)
• Same series (CLIPLINE UK)
• Identical feed-through type configuration
• Matching 3-position, 1-level architecture
• Identical terminal width (6.2mm)
• Identical screw termination style
• Matching wire gauge range (10-30 AWG / 0.2-4mm²)
• Equivalent or superior current and voltage ratings
• Compatible insulation material and flammability classification
• Matching stripping length (8mm)

The Phoenix Contact 1923021 meets all substitution criteria and is classified as an active product, providing a direct functional replacement for the obsolete 3048535.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 1923021 is the qualified substitute for the obsolete 3048535. Both components maintain identical electrical specifications, mechanical configuration, and material properties. The 1923021 carries active product status with ROHS3 compliance, providing enhanced regulatory alignment compared to the obsolete predecessor. The color difference (black to gray) represents the only physical distinction and does not affect functional performance or electrical characteristics. Selection of the 1923021 is appropriate for replacement applications requiring equivalent terminal block performance within the CLIPLINE UK series.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 1923021 be used as a direct replacement for the 3048535?

A: Yes. Both components share identical electrical ratings (32 A IEC / 35 A UL), voltage specifications (500V IEC / 150V UL), wire gauge compatibility (10-30 AWG), and mechanical configuration (3-position, 1-level, 6.2mm terminal width, screw termination).

Q: What is the difference between the 3048535 and 1923021?

A: The primary differences are product status (obsolete versus active) and color (black versus gray). Electrical and mechanical specifications are equivalent. The 1923021 carries ROHS3 compliance versus RoHS compliance for the 3048535.

Q: Are there any compatibility concerns when substituting the 1923021 for the 3048535?

A: No compatibility concerns exist. Both components use identical termination methods, wire gauge ranges, and mounting configurations within the CLIPLINE UK series.

Q: Does the color difference affect performance?

A: No. Color is a cosmetic distinction only and does not impact electrical performance, current capacity, voltage rating, or mechanical function.

Q: What wire gauges are supported by the 1923021?

A: The 1923021 supports 10-30 AWG (0.2-4mm²) with an 8mm stripping length requirement.