Phoenix Contact 3048264 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3048264 is a 2-position feed-through terminal block connector designed for wire gauges 10-30 AWG (0.2-6 mm²). This component belongs to the CLIPLINE UK series and features screw termination with polyamide insulation rated UL94 V-0. The part is currently classified as obsolete, necessitating identification of active equivalent components for ongoing applications and new designs.

Substiute Parts

3048264

Phoenix ContactIn Stock: 9633048264 Datasheet

Current PartRFQ

3004362

Phoenix ContactIn Stock: 6356763004362 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The Phoenix Contact 3004362 qualifies as a direct substitute for the 3048264 based on the following critical parameters:

• Identical electrical specifications: Both parts support 800 V IEC and 600 V UL ratings, with 30 A UL current capacity
• Identical mechanical configuration: 2-position, 1-level feed-through design with 6.2 mm terminal width
• Identical wire gauge compatibility: 10-30 AWG (0.2-6 mm²) with 8 mm stripping length
• Identical termination method: Screw termination
• Identical insulation material and rating: Polyamide (PA), Nylon with UL94 V-0 flammability rating
• Same series platform: Both belong to the CLIPLINE UK series

The primary difference is product status: the 3048264 is obsolete, while the 3004362 is active. The 3004362 also features improved compliance documentation (ROHS3 and REACH affected status) and higher inventory availability.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3004362 is the direct substitute for the obsolete 3048264. Both components meet identical electrical and mechanical requirements for 2-position feed-through terminal block applications in the 10-30 AWG range.

Selection basis:

• The 3004362 maintains full compatibility with all critical electrical parameters (800 V IEC, 600 V UL, 30 A UL)
• Both parts comply with UL94 V-0 flammability standards and RoHS requirements
• The 3004362 carries current product status with active manufacturing and significantly higher inventory availability
• The 3004362 includes ROHS3 and REACH compliance documentation, reflecting current regulatory standards
• Color difference (Black/Yellow vs. Gray) does not affect electrical or mechanical function

For applications requiring the obsolete 3048264, the 3004362 provides functional equivalence with the advantage of active product support and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can the 3004362 directly replace the 3048264 in existing designs?

A: Yes. Both components share identical electrical ratings (800 V IEC, 600 V UL, 30 A UL), mechanical configuration (2-position, 1-level), wire gauge compatibility (10-30 AWG), and termination method (screw). The 3004362 is electrically and mechanically interchangeable.

Q: What is the difference in current rating between the two parts?

A: The 3048264 specifies 41 A IEC current, while the 3004362 specifies 32 A IEC current. However, both parts support the same 30 A UL rating, which is the standard for North American applications. For IEC-rated applications requiring 41 A capacity, alternative components should be evaluated.

Q: Does the color difference affect compatibility?

A: No. The color difference (Black/Yellow for 3048264 vs. Gray for 3004362) is a visual identifier only and does not affect electrical performance, mechanical fit, or functional compatibility.

Q: Why is the 3048264 classified as obsolete?

A: Product obsolescence is determined by the manufacturer based on market demand, production decisions, and product lifecycle management. The 3004362 represents the active equivalent within the CLIPLINE UK series.

Q: Are there packaging differences between these parts?

A: The 3048264 packaging is not specified in the data. The 3004362 is supplied in bulk packaging. Confirm packaging requirements with your procurement specifications.

Q: Do both parts meet current compliance standards?

A: Both parts are RoHS compliant. The 3004362 carries ROHS3 and REACH compliance designations, reflecting current regulatory documentation. The 3048264 meets RoHS requirements but lacks current REACH status documentation.