Phoenix Contact 3045868 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3045868 is a 7-position terminal block plug with female sockets configured for 90° wire entry (in-line free hanging). This component is classified as Last Time Buy, indicating discontinued production status. The part operates at IEC ratings of 32A/800V and UL ratings of 30A/600V, supporting wire gauges from 10-26 AWG (0.14-6mm²). Due to its Last Time Buy status, identifying functionally equivalent substitute parts is essential for ongoing procurement and system continuity.

Substiute Parts

3045868

Phoenix ContactIn Stock: 9673045868 Datasheet

Current PartRFQ

3060173

Phoenix ContactIn Stock: 11823060173 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 3045868 is determined by the following critical parameters:

• Electrical Ratings: Current and voltage specifications must meet or exceed IEC 32A/800V and UL 30A/600V requirements
• Position Configuration: 7-position, single-level plug with female sockets
• Termination Method: Screw termination for consistent connection reliability
• Mounting Configuration: Free hanging (in-line) mounting type
• Wire Compatibility: Support for 10-26 AWG (0.14-6mm²) wire gauge range
• Manufacturer Ecosystem: Phoenix Contact CLIPLINE COMBI series compatibility
• Compliance: RoHS compliance and MSL rating maintenance

The Phoenix Contact 3045868 (CLIPLINE COMBI UPBV series) is substitutable with the 3060173 (CLIPLINE COMBI UP series). Both parts maintain identical electrical ratings, position count, termination style, and mounting configuration. The primary difference is wire entry orientation: the 3045868 features 90° entry while the 3060173 features 180° entry. This geometric difference does not affect electrical performance or compatibility with standard wire gauges within the specified range.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3060173 serves as the direct substitute for the 3045868 based on the following engineering criteria:

Electrical Equivalence: Both parts maintain identical IEC and UL electrical ratings (32A/800V and 30A/600V respectively), ensuring no derating or performance compromise in power distribution applications.

Mechanical Compatibility: Both plugs support the same wire gauge range (10-26 AWG / 0.2-6mm²) with screw termination, maintaining consistent installation procedures and contact reliability.

Compliance Status: The 3060173 holds Active product status with full RoHS compliance and MSL rating of 1, providing long-term availability and regulatory assurance compared to the Last Time Buy status of the 3045868.

Geometric Consideration: The wire entry orientation difference (90° versus 180°) represents a spatial configuration change rather than an electrical or functional limitation. Selection between these orientations depends on physical installation constraints and cable routing requirements within the target application.

Frequently Asked Questions (FAQ)

Q: Can the 3060173 directly replace the 3045868 in existing installations?

A: Electrical and functional compatibility is confirmed. The substitute maintains identical position count, electrical ratings, termination method, and wire gauge support. Physical installation feasibility depends on available space for the 180° wire entry configuration versus the original 90° orientation.

Q: What is the significance of the wire entry angle difference?

A: Wire entry angle (90° versus 180°) defines the spatial orientation of incoming conductors relative to the plug body. This is a geometric parameter that does not affect electrical performance, current capacity, or voltage rating. Selection is based on physical installation geometry and cable routing paths.

Q: Are both parts compatible with the same wire gauges?

A: Both parts support 10-26 AWG wire gauges. The 3045868 specifies 0.14-6mm² while the 3060173 specifies 0.2-6mm². This minor variance in the lower range does not create practical incompatibility for standard industrial applications.

Q: Why is the 3045868 classified as Last Time Buy?

A: Last Time Buy status indicates Phoenix Contact has discontinued production of this part. The 3060173 (Active status) represents the current production equivalent within the CLIPLINE COMBI series, ensuring ongoing availability and supply chain continuity.

Q: Are there any compliance differences between the two parts?

A: Both parts are RoHS Compliant with MSL rating of 1 (Unlimited). The 3060173 includes additional specification detail (UL94 V-0 flammability rating, screw size M3, and torque specification), reflecting current documentation standards for active products.