Phoenix Contact 3045855 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3045855 is a 6-position terminal block plug with female sockets and 90° free-hanging (in-line) wire entry configuration. This component is classified as Last Time Buy, indicating discontinued production status. The part operates at IEC ratings of 32A/800V and UL ratings of 30A/600V, with screw termination and M3 fastening. Due to its Last Time Buy status, identifying functionally compatible substitute parts is essential for ongoing procurement and system maintenance.

Substiute Parts

3045855

Phoenix ContactIn Stock: 8743045855 Datasheet

Current PartRFQ

3060160

Phoenix ContactIn Stock: 8213060160 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 3045855 is determined by the following critical parameters:

Electrical Compatibility: Current and voltage ratings must meet or exceed the original part specifications (IEC: 32A/800V; UL: 30A/600V). Both the main part and substitute must support identical termination methodology (screw-based) and wire gauge ranges (10-26 AWG / 0.14-6mm²).

Mechanical Compatibility: The substitute must maintain the same number of positions (6), positions per level (6), and single-level configuration. Screw size (M3) and torque specifications (0.6-0.8 Nm) must remain constant. Wire strip length (9mm) and housing material (Polyamide/Nylon) must be identical.

Regulatory Compliance: Both parts must maintain UL94 V-0 flammability rating, RoHS compliance status, and MSL Level 1 classification.

Functional Difference: The primary distinction between the main part and its substitute is the plug wire entry orientation: the 3045855 features 90° entry, while the substitute features 180° entry. This difference affects physical installation geometry but does not alter electrical performance or safety ratings.

The Phoenix Contact 3060160 meets all electrical, mechanical, and regulatory requirements for substitution, with the noted wire entry orientation difference.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3060160 is a direct electrical and mechanical substitute for the 3045855. Both parts maintain identical current and voltage ratings (IEC: 32A/800V; UL: 30A/600V), screw termination methodology, wire gauge compatibility (10-26 AWG), and regulatory certifications (UL94 V-0, RoHS Compliant, MSL Level 1).

The 3045855 carries Last Time Buy status, indicating production discontinuation. The 3060160 maintains Active product status, ensuring ongoing availability and supply chain continuity.

The primary design difference is wire entry orientation: 90° for the 3045855 versus 180° for the 3060160. This affects physical installation geometry and cable routing but does not impact electrical performance or safety characteristics. The 3060160 features a reduced insulation height (41.20mm versus 48.50mm), which may require spatial consideration in confined installation environments.

Both parts are manufactured by Phoenix Contact within the CLIPLINE COMBI series, ensuring design consistency and compatibility with associated connector systems.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 3060160 directly replace the 3045855 in all applications?

A: Electrical and mechanical compatibility is confirmed. The primary consideration is wire entry orientation: the 3045855 features 90° entry while the 3060160 features 180° entry. Installation geometry and cable routing must accommodate this difference. The reduced insulation height of the 3060160 (41.20mm versus 48.50mm) may affect spatial fit in confined mounting locations.

Q: Are the electrical ratings identical between these parts?

A: Yes. Both parts operate at IEC ratings of 32A/800V and UL ratings of 30A/600V. Wire gauge compatibility (10-26 AWG / 0.14-6mm² for the 3045855; 0.2-6mm² for the 3060160) and screw termination specifications are equivalent.

Q: What is the significance of the Last Time Buy status on the 3045855?

A: Last Time Buy indicates that Phoenix Contact has discontinued production of the 3045855. Existing inventory is available, but no future manufacturing is planned. The 3060160 maintains Active status, ensuring long-term availability for new designs and ongoing procurement requirements.

Q: Are both parts RoHS compliant and suitable for regulated applications?

A: Yes. Both the 3045855 and 3060160 are RoHS Compliant with UL94 V-0 flammability rating and MSL Level 1 classification, meeting regulatory requirements for industrial and commercial applications.

Q: What is the difference in wire strip length between these parts?

A: Both parts specify 9mm wire strip length. This parameter is identical and does not affect substitution compatibility.

Q: How do the screw torque specifications compare?

A: Both parts require identical M3 screw torque of 0.6-0.8 Nm (5.3-7.1 Lb-In). Installation procedures and fastening methodology remain consistent between the two parts.