Phoenix Contact 3041998 Terminal Block Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3041998 is a 12-position terminal block plug connection with 5.2mm terminal width, designed for DIN rail mounting. This component is classified as Last Time Buy, indicating discontinued production status. The part operates at IEC ratings of 24 A and 500 V, with UL ratings of 10 A and 300 V. Due to its Last Time Buy status, identifying functionally equivalent substitute parts is essential for ongoing system maintenance and new design implementations.

Substiute Parts

3041998

Phoenix ContactIn Stock: 9633041998 Datasheet

Current PartRFQ

3012310

Phoenix ContactIn Stock: 7073012310 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for terminal block plug connections is determined by the following critical parameters:

• Mechanical Compatibility: Number of positions (12), number of levels (4), terminal width (5.2mm), and mounting type (DIN Rail) must be identical
• Electrical Compatibility: Current and voltage ratings must meet or exceed the application requirements
• Termination Method: Plug receptacles with push-in spring termination must be maintained
• Housing and Materials: Gray polyamide (PA) nylon housing with UL94 V-0 flammability rating ensures consistent physical and thermal properties
• Regulatory Compliance: RoHS compliance status must be maintained

The substitute part Phoenix Contact 3041998 meets these criteria through identical mechanical configuration and equivalent electrical performance within acceptable operational parameters.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3012310 serves as a direct mechanical substitute for the 3041998 within applications where electrical requirements do not exceed 10 A at 250 V IEC ratings. Both components maintain identical mechanical configuration, DIN rail mounting compatibility, and regulatory compliance through RoHS certification and UL94 V-0 flammability rating.

The 3012310 is classified as Active product status, ensuring continued availability and supply chain stability compared to the Last Time Buy status of the 3041998. Selection of the substitute part is appropriate for new designs and maintenance applications operating within the reduced electrical specifications.

Applications requiring the full 24 A at 500 V IEC ratings of the original 3041998 cannot utilize the 3012310 substitute without electrical performance degradation.

Frequently Asked Questions (FAQ)

Q: Can the 3012310 be used as a direct replacement for the 3041998 in all applications?

A: The 3012310 provides mechanical and physical compatibility but operates at reduced electrical ratings (10 A at 250 V IEC versus 24 A at 500 V IEC). Substitution is valid only for applications within the lower electrical specifications.

Q: What are the key differences between these two parts?

A: The primary differences are electrical ratings and product status. The 3041998 operates at higher current and voltage levels and is Last Time Buy. The 3012310 is an Active product with lower electrical ratings but identical mechanical configuration and terminal width.

Q: Are both parts RoHS compliant?

A: Yes, both the 3041998 and 3012310 are RoHS compliant and maintain UL94 V-0 flammability rating.

Q: What is the wire gauge compatibility difference?

A: The 3041998 accepts 12-28 AWG (0.08-4mm²), while the 3012310 accepts 12-26 AWG (0.14-4mm²). The 3012310 does not support the smallest wire gauges of the original part.

Q: Does packaging type affect substitution eligibility?

A: Packaging type (Bulk versus Box) does not affect electrical or mechanical compatibility. Both parts are functionally equivalent within their respective electrical specifications.