Equivalent & Substitute Parts for Würth Elektronik 30410

Part Overview

The Würth Elektronik 30410 is an RF EMI flexible ferrite sheet constructed from rubber and ferrite powder material with non-conductive, single-sided adhesive. This component is designed for electromagnetic interference suppression in RF applications. The part is currently listed as obsolete, making identification of suitable substitute components necessary for ongoing design and procurement requirements.

Substiute Parts

30410

Würth ElektronikIn Stock: 1518030410 Datasheet

Current PartRFQ

30410S

Würth ElektronikIn Stock: 908430410S Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Würth Elektronik 30410 is determined by the following critical parameters:

• Material composition: Rubber and ferrite powder construction
• Adhesive configuration: Non-conductive, single-sided application
• Dimensional compatibility: Length, width, and thickness tolerances
• Operating temperature range capability
• Regulatory compliance: RoHS3 and REACH status
• Series compatibility: WE-FAS product line

The substitute part 30410S maintains the same material composition, adhesive type, and regulatory compliance profile. Dimensional variations exist in length, width, and thickness, along with an extended operating temperature range on the upper limit.

Parameter Comparison

Engineering Selection Recommendations

The 30410S is the manufacturer-recommended substitute for the obsolete 30410. Both components maintain identical material composition, adhesive configuration, and regulatory compliance certifications. The substitute part is currently in active production status with confirmed inventory availability.

Dimensional differences exist between the two parts. The 30410S provides increased length (330mm versus 300mm) and thickness (1.10mm versus 1.00mm), with reduced width (210mm versus 230mm). The operating temperature range of the 30410S extends to 90°C on the upper limit, compared to 85°C for the original part, while the lower temperature limit is -20°C versus -40°C.

Selection of the 30410S should be based on mechanical fit requirements within the target application and thermal operating conditions. Both parts satisfy ROHS3 and REACH compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can the 30410S directly replace the 30410 in existing designs?

A: Direct replacement depends on mechanical space constraints. The 30410S has different overall dimensions: 330mm length (versus 300mm), 210mm width (versus 230mm), and 1.10mm thickness (versus 1.00mm). Layout compatibility must be confirmed before substitution.

Q: What are the key differences in operating temperature ranges?

A: The 30410 operates from -40°C to 85°C, while the 30410S operates from -20°C to 90°C. Applications requiring operation below -20°C cannot use the 30410S. Applications requiring operation above 85°C benefit from the extended upper temperature limit of the 30410S.

Q: Are both parts equivalent in electromagnetic interference suppression performance?

A: Both parts use identical material composition (rubber and ferrite powder) and adhesive configuration (non-conductive, single-sided). Performance equivalence in EMI suppression is determined by material properties, which are identical between the two parts.

Q: What is the packaging difference between these parts?

A: The 30410 is supplied in standard packaging, while the 30410S is supplied in bulk packaging. Procurement quantities and handling procedures may differ accordingly.

Q: Are both parts RoHS3 and REACH compliant?

A: Yes. Both the 30410 and 30410S are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component procurement.