Phoenix Contact 3036123 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3036123 is a 2-position feed-through terminal block connector designed for wire gauges 6-16 AWG (0.2-16mm²). This component is classified as Active product status and serves as a connection interface in electrical distribution and control systems. The CLIPLINE ST series terminal block utilizes push-in spring termination technology with polyamide insulation rated UL94 V-0. Substitute parts are identified when equivalent electrical ratings, mechanical dimensions, and compliance certifications align with the original specification, enabling component interchangeability in system designs.

Substiute Parts

3036123

Phoenix ContactIn Stock: 8073036123 Datasheet

Current PartRFQ

REB-A2E-BU

Adam TechIn Stock: 1385REB-A2E-BU Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part identification for the Phoenix Contact 3036123 is based on the following critical parameters that determine functional equivalence:

Electrical Compatibility Criteria:

• Number of positions: 2 (exact match required)
• Terminal width: 10.2mm (exact match required)
• Termination style: Push In, Spring (exact match required)
• Wire gauge acceptance: Must accommodate 6-16 AWG minimum range
• Voltage rating: Must meet or exceed 600V UL specification
• Current rating: Must meet or exceed 65 A UL specification

Mechanical & Compliance Criteria:

• Type: Feed Through (exact match required)
• Insulation material: Polyamide/Nylon with UL94 V-0 rating (exact match required)
• Color: Blue (exact match required)
• RoHS3 Compliance: Required
• REACH Unaffected status: Required

The Adam Tech REB-A2E-BU qualifies as a substitute based on matching all critical electrical and mechanical parameters within the allowed specification range.

Parameter Comparison

Engineering Selection Recommendations

The Adam Tech REB-A2E-BU terminal block connector is qualified as a direct substitute for the Phoenix Contact 3036123 based on the following engineering criteria:

Electrical Equivalence: Both components maintain identical UL voltage (600V) and current (65 A) ratings, ensuring equivalent performance in power distribution applications. The REB-A2E-BU accepts a wider wire gauge range (6-24 AWG versus 6-16 AWG), providing expanded compatibility with smaller gauge conductors while maintaining the required minimum specification.

Mechanical Compatibility: Terminal width (10.2mm), position count (2), and feed-through configuration are identical. Push-in spring termination technology is consistent across both components, enabling direct installation without mechanical modification.

Compliance & Certification: Both components are ROHS3 compliant, REACH unaffected, and feature UL94 V-0 polyamide insulation. Active product status confirms ongoing manufacturer support and availability for both parts.

Material Specification: The Adam Tech component utilizes PA66 (polyamide 6/6), a recognized variant of polyamide insulation material with equivalent electrical and thermal properties to the Phoenix Contact PA specification, maintaining the required flammability rating.

Frequently Asked Questions (FAQ)

Q: Can the Adam Tech REB-A2E-BU replace the Phoenix Contact 3036123 in existing installations?

A: Yes. Both components share identical electrical ratings (65 A UL, 600V UL), mechanical dimensions (10.2mm terminal width, 2 positions), and termination technology (push-in spring). The REB-A2E-BU is mechanically and electrically interchangeable for the specified application.

Q: What is the significance of the wider wire gauge range (6-24 AWG) on the REB-A2E-BU?

A: The REB-A2E-BU accommodates smaller gauge conductors (down to 24 AWG) compared to the Phoenix Contact specification (6-16 AWG minimum). For applications using only 6-16 AWG wire, both components perform identically. The expanded range provides flexibility for future designs incorporating smaller gauge conductors.

Q: Are there differences in the wire gauge range expressed in mm²?

A: The Phoenix Contact 3036123 accepts 0.2-16mm², while the REB-A2E-BU accepts 0.2-10mm². For applications using conductors larger than 10mm² (approximately 8 AWG and larger), the Phoenix Contact component is required. For typical 6-16 AWG applications, the overlap is sufficient for substitution.

Q: Do both components meet the same compliance standards?

A: Yes. Both are ROHS3 compliant, REACH unaffected, and feature UL94 V-0 polyamide insulation. Both maintain Active product status with ongoing manufacturer support.

Q: What is the difference between PA and PA66 insulation material?

A: PA66 (polyamide 6/6) is a specific formulation of polyamide material. Both PA and PA66 meet the UL94 V-0 flammability requirement and provide equivalent electrical and thermal performance for terminal block applications.

Q: Are packaging differences relevant to component selection?

A: The Phoenix Contact 3036123 is supplied in Bulk packaging, while the Adam Tech REB-A2E-BU is supplied in Box packaging. Packaging format does not affect electrical or mechanical compatibility; selection depends on procurement and inventory management requirements.