Altech Corporation 30.302 Terminal Block Plug - Equivalent & Substitute Parts

Part Overview

The Altech Corporation 30.302 is a 2-position terminal block plug rated for 5mm pitch applications at 9A/150V. This component is classified as a position terminal block designed for standard electrical interconnection in industrial and commercial applications. The part maintains Active product status with full ROHS3 compliance and is currently in stock with 1032 units available.

Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable, while maintaining compatibility with the same electrical and mechanical interface specifications.

Substiute Parts

30.302

Altech CorporationIn Stock: 107030.302 Datasheet

Current PartRFQ

1776263-2

TE Connectivity AMP ConnectorsIn Stock: 80961776263-2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute part 1776263-2 (TE Connectivity AMP Connectors) qualifies as an equivalent based on the following critical parameters:

• Number of Positions: Both parts feature 2-position configuration
• Pitch Specification: Both parts maintain 0.197" (5.00mm) pitch for mechanical compatibility
• Electrical Ratings: The substitute part provides 10A at 300V UL rating, which exceeds the main part's 9A/150V specification, ensuring functional compatibility
• Termination Interface: Both parts utilize screw-based termination suitable for wire connection
• Product Status: Both parts maintain Active status with ROHS3 compliance
• Wire Gauge Compatibility: The substitute accepts 16-24 AWG (0.2-1.4mm²) wire, supporting standard industrial wiring practices

The substitution is based strictly on mechanical pitch compatibility, electrical rating sufficiency, and termination method alignment.

Parameter Comparison

Engineering Selection Recommendations

Both the Altech 30.302 and TE Connectivity 1776263-2 maintain Active product status with ROHS3 compliance, ensuring regulatory alignment for current manufacturing environments. The TE Connectivity substitute provides electrical ratings that exceed the original specification (10A/300V versus 9A/150V), supporting direct functional replacement in applications requiring the 5mm pitch terminal block interface.

Selection between these parts should be based on availability, lead time requirements, and supply chain considerations. The REACH Affected status of the substitute part requires verification against specific application regulatory requirements in regions where REACH compliance is mandated.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1776263-2 directly replace the Altech 30.302?

A: Yes. Both parts share identical 2-position, 5mm pitch mechanical specifications. The TE Connectivity part's higher electrical ratings (10A/300V) ensure compatibility with applications designed for the Altech part's 9A/150V specification.

Q: What is the primary compatibility criterion for these terminal blocks?

A: The 5mm pitch specification is the critical mechanical parameter. Both parts maintain this pitch, ensuring proper mating with corresponding header or connector interfaces.

Q: Are there compliance differences between these parts?

A: Both parts are ROHS3 compliant. The TE Connectivity part carries REACH Affected status, while the Altech part is REACH Unaffected. Applications subject to REACH regulations must account for this distinction.

Q: What wire gauges are supported?

A: The TE Connectivity substitute supports 16-24 AWG (0.2-1.4mm²). Wire gauge specifications for the Altech part are not provided in the technical data.

Q: Are both parts available in bulk packaging?

A: Yes. Both parts are supplied in bulk packaging, suitable for production assembly environments.