Phoenix Contact 3019014 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3019014 is a 2-position feed-through terminal block connector designed for wire gauges 12-28 AWG (0.2-4mm²). This component is part of the CLIPLINE UK series and features screw and tab termination with polyamide insulation rated UL94 V-2. The part is currently classified as obsolete, making identification of suitable substitutes essential for ongoing system maintenance and new designs requiring compatible components.

Substiute Parts

3019014

Phoenix ContactIn Stock: 9143019014 Datasheet

Current PartRFQ

3003017

Phoenix ContactIn Stock: 10863003017 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Phoenix Contact 3019014 is determined by strict equivalence across the following critical parameters:

• Mechanical compatibility: Number of positions (2), number of levels (1), terminal width (6.2mm), and feed-through type must remain identical
• Electrical ratings: Current and voltage ratings must meet or exceed the original specifications for the applicable standard (IEC or UL)
• Wire gauge accommodation: Wire gauge range must support 12-28 AWG (0.2-4mm²)
• Termination interface: Screw termination must be present to ensure compatibility with existing wiring practices
• Material and flammability: Polyamide insulation with UL94 V-2 rating ensures consistent performance in the same application environment
• Series alignment: CLIPLINE UK series designation confirms mechanical and electrical interchangeability

The Phoenix Contact 3003017 meets all substitution criteria as an active product within the same series, offering enhanced electrical ratings and improved compliance status.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3003017 is the designated substitute for the obsolete 3019014 model. Selection of the 3003017 is based on the following engineering factors:

Product Status: The 3003017 is an active product with ongoing manufacturer support, ensuring long-term availability and supply chain continuity compared to the obsolete 3019014.

Compliance and Certifications: The 3003017 carries ROHS3 compliance, representing current regulatory alignment. Both parts maintain UL94 V-2 flammability ratings and identical mechanical interfaces within the CLIPLINE UK series.

Electrical Performance: The 3003017 provides enhanced IEC current rating (32 A versus 20 A) and improved UL voltage rating (600V versus 250V), making it suitable for applications requiring the original specifications or higher performance margins.

Mechanical Compatibility: Identical positioning (2 positions, 1 level), terminal width (6.2mm), and wire gauge accommodation (12-28 AWG / 0.2-4mm²) ensure direct mechanical substitution in existing assemblies.

Frequently Asked Questions (FAQ)

Q: Can the 3003017 directly replace the 3019014 in existing installations?

A: Yes. Both components share identical mechanical interfaces, positioning, terminal width, and wire gauge accommodation within the CLIPLINE UK series. The 3003017 maintains the same screw termination method required for compatibility.

Q: What are the differences in electrical ratings between these parts?

A: The 3003017 provides higher IEC current capacity (32 A versus 20 A) and improved UL voltage rating (600V versus 250V). Both maintain 800V IEC voltage rating. These differences represent performance enhancements suitable for the same application categories.

Q: Does the stripping length difference affect installation?

A: The 3003017 specifies 8mm stripping length compared to 9mm for the 3019014. This minor difference reflects manufacturing refinement and does not impact compatibility with standard wire preparation practices for 12-28 AWG conductors.

Q: What is the significance of the ROHS3 compliance on the 3003017?

A: ROHS3 compliance indicates the 3003017 meets current regulatory requirements for restricted substances in electrical and electronic equipment. This represents updated compliance status compared to the earlier RoHS designation on the 3019014.

Q: Are there packaging differences between these parts?

A: The 3019014 is supplied in standard packaging, while the 3003017 is supplied in bulk packaging. Both formats contain the same component specifications and are suitable for production and maintenance applications.

Q: Is the termination style difference significant?

A: The 3019014 offers both screw and tab termination options, while the 3003017 provides screw termination. For applications requiring screw termination, the 3003017 is fully compatible. Applications specifically requiring tab termination should retain the original 3019014 if available.