Würth Elektronik 3013310 RF Shield Tape - Equivalent & Substitute Parts

Part Overview

The Würth Elektronik 3013310 is an RF EMI shielding tape constructed from copper foil with conductive, single-sided adhesive. It measures 0.394" (10.00mm) in width, 108.268' (33.00m) in length, and 0.003" (0.07mm) in thickness. This component is classified as obsolete, necessitating identification of active equivalent alternatives for new designs and ongoing production requirements. The WE-CF series provides electromagnetic interference shielding for RF applications requiring conductive tape solutions.

Substiute Parts

3013310

Würth ElektronikIn Stock: 12753013310 Datasheet

Current PartRFQ

3013310A

Würth ElektronikIn Stock: 9213013310A Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 3013310 is determined by strict adherence to the following parameters:

• Series Compatibility: Both parts must belong to the WE-CF series
• Physical Dimensions: Length (108.268' / 33.00m), width (0.394" / 10.00mm), and thickness (0.003" / 0.07mm) must remain identical
• Adhesive Configuration: Conductive, single-sided adhesive is required
• Compliance Standards: RoHS3 compliance and MSL 1 rating must be maintained
• Operating Temperature: The substitute must support the required temperature range
• Material Composition: The foil material may vary (copper or aluminum) provided all other electrical and mechanical parameters are equivalent

The 3013310A qualifies as a direct substitute based on matching all dimensional, adhesive, compliance, and series specifications. The material change from copper foil to aluminum foil does not disqualify substitution when all other parameters remain within specification.

Parameter Comparison

Engineering Selection Recommendations

The 3013310A is the direct substitute for the obsolete 3013310. Both parts maintain identical dimensional specifications, adhesive properties, and compliance certifications. The 3013310A carries active product status, ensuring continued availability and supply chain reliability. The material composition change from copper foil to aluminum foil does not compromise substitution eligibility when all mechanical and electrical parameters remain equivalent. Selection of the 3013310A is appropriate for applications requiring RF EMI shielding tape within the specified dimensional and temperature parameters.

Frequently Asked Questions (FAQ)

Q: Can the 3013310A replace the 3013310 in existing designs?

A: Yes. The 3013310A maintains identical length, width, thickness, adhesive type, and series designation. Both parts are ROHS3 compliant with MSL 1 rating.

Q: What is the difference between the copper foil (3013310) and aluminum foil (3013310A) versions?

A: The material composition differs; however, both are conductive shielding tapes within the WE-CF series with identical dimensional and adhesive specifications.

Q: Are there packaging differences between these parts?

A: The 3013310A is supplied in bulk packaging. Packaging specifications for the 3013310 are not provided in the available data.

Q: What is the maximum operating temperature for each part?

A: The 3013310 operates from -25°C to 85°C. The 3013310A operates from -25°C to 80°C. Applications requiring operation above 80°C must use the 3013310 if available.

Q: Are both parts RoHS compliant?

A: Yes. Both the 3013310 and 3013310A are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings.