Phoenix Contact 3005332 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 3005332 is a 4-position feed-through terminal block connector rated for 14-26 AWG wire gauges, with IEC ratings of 17.5 A at 800 V and UL ratings of 15 A at 600 V. This component is classified as obsolete, necessitating identification of suitable substitute parts for ongoing applications and new designs. The CLIPLINE MZDB series feed-through configuration requires compatible alternatives that maintain electrical performance and mechanical compatibility within the specified parameter ranges.

Substiute Parts

3005332

Phoenix ContactIn Stock: 7083005332 Datasheet

Current PartRFQ

3244232

Phoenix ContactIn Stock: 10503244232 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute identification for the Phoenix Contact 3005332 is based on the following critical parameters that define functional equivalence:

• Number of positions: 4 positions maintained
• Terminal width: 10.4 mm maintained
• Termination style: Push In, Spring maintained
• Voltage rating: IEC 800 V / UL 600 V maintained or exceeded
• Wire gauge compatibility: Overlap within 14-26 AWG range
• Insulation material: Polyamide (PA), Nylon maintained
• Flammability rating: UL94 V-0 maintained
• Compliance: RoHS and REACH status

The substitute part Phoenix Contact 3244232 meets these criteria while offering enhanced current ratings and expanded wire gauge acceptance, making it suitable for direct replacement in applications where the feed-through configuration can be adapted to a middle-position mounting type.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3244232 serves as a functional substitute for the obsolete 3005332 based on the following engineering criteria:

Electrical compatibility is maintained across both IEC and UL standards. The substitute part exceeds the original specifications with higher current ratings (24 A IEC / 20 A UL versus 17.5 A IEC / 15 A UL) and maintains identical voltage ratings at 800 V IEC and 600 V UL. Wire gauge acceptance is expanded from 14-26 AWG to 12-28 AWG, providing broader terminal accommodation while maintaining the critical 10.4 mm terminal width and push-in spring termination method.

Material composition and flammability certification remain consistent, with both parts utilizing Polyamide (PA) Nylon insulation rated UL94 V-0. Compliance status is enhanced in the substitute part, which carries ROHS3 certification compared to the original RoHS compliance. Both parts maintain REACH unaffected status.

The primary design consideration is the transition from feed-through to middle-position mounting type. This architectural difference requires evaluation within the specific application context to ensure mechanical compatibility with the circuit board layout and connector housing design.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 3244232 directly replace the 3005332 in all applications?

A: Electrical and material specifications are compatible. However, the mounting type differs: 3005332 is feed-through while 3244232 is middle-position. Mechanical compatibility depends on the specific circuit board design and connector housing configuration. Verify mounting hole alignment and clearance requirements before implementation.

Q: What is the significance of the expanded wire gauge range in the substitute part?

A: The 3244232 accepts 12-28 AWG (0.08-4 mm²) compared to the original 14-26 AWG (0.14-2.5 mm²). This expansion provides flexibility for applications requiring smaller or larger conductor sizes while maintaining the same terminal width and spring-in termination mechanism.

Q: Are there compliance differences between the two parts?

A: Both parts are RoHS compliant and REACH unaffected. The substitute part carries ROHS3 certification, representing current regulatory compliance. Both maintain UL94 V-0 flammability rating and identical voltage specifications.

Q: What is the product status implication for the substitute part?

A: The 3244232 is classified as Last Time Buy, indicating limited future availability. For long-term supply chain planning, this status should be considered alongside the obsolete status of the original part when evaluating component lifecycle requirements.

Q: How do the current ratings compare?

A: The substitute part provides higher current capacity: 24 A at IEC versus 17.5 A for the original, and 20 A at UL versus 15 A for the original. Applications operating at or near the original current limits benefit from this increased rating margin.