2SH-C-04-TS-SMT Equivalent & Substitute Parts

Part Overview

The 2SH-C-04-TS-SMT is a rectangular connector header manufactured by Adam Tech, designed for surface mount applications with 4 positions at 2.00mm pitch. This component is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing design support and production continuity. The part features shrouded 4-wall construction, solder termination, and is suitable for board-to-cable/wire connections in applications requiring 2A current capacity at 100VAC.

Substiute Parts

2SH-C-04-TS-SMT

Adam TechIn Stock: 10362SH-C-04-TS-SMT Datasheet

Current PartRFQ

B4B-PH-SM4-TB

JST Sales America Inc.In Stock: 3381B4B-PH-SM4-TB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 2SH-C-04-TS-SMT is determined by strict alignment of the following critical parameters:

• Connector type (Header) and contact type (Male Pin)
• Pitch specification (0.079" / 2.00mm)
• Position count (4 positions, single row)
• Mounting method (Surface Mount)
• Shrouding configuration (Shrouded - 4 Wall)
• Termination method (Solder)
• Electrical ratings (2A current, 100V minimum voltage)
• Operating temperature range (-25°C ~ 85°C)
• Flammability compliance (UL94 V-0)
• RoHS compliance status

The substitute part B4B-PH-SM4-TB from JST Sales America Inc. meets all these criteria and is classified as Active product status, providing design continuity for the obsolete 2SH-C-04-TS-SMT.

Parameter Comparison

Engineering Selection Recommendations

The B4B-PH-SM4-TB is a direct substitute for the 2SH-C-04-TS-SMT based on electrical and mechanical parameter alignment. The substitute part carries Active product status, ensuring long-term availability and supply chain stability compared to the obsolete original part. Both components maintain ROHS3 compliance and UL94 V-0 flammability certification, meeting regulatory requirements for equivalent applications. The substitute part is available in Tape & Reel packaging with higher inventory levels (3300 pcs vs. 1022 pcs), supporting production scalability.

Frequently Asked Questions (FAQ)

Q: Can B4B-PH-SM4-TB be used as a direct replacement for 2SH-C-04-TS-SMT?

A: Yes. Both parts share identical pitch (2.00mm), position count (4), mounting type (Surface Mount), shrouding configuration (Shrouded - 4 Wall), and electrical ratings (2A, 100V minimum). Operating temperature ranges and flammability ratings are equivalent.

Q: What are the key differences between these parts?

A: The primary differences are manufacturer (Adam Tech vs. JST), product status (Obsolete vs. Active), contact material (Brass vs. Copper Alloy), insulation material (PA46 Nylon 4/6 vs. PA6T Nylon 6T), and packaging format (standard vs. Tape & Reel). These differences do not affect functional compatibility in equivalent applications.

Q: Does the substitute part require PCB layout modifications?

A: No. Both parts maintain identical pitch spacing (2.00mm), insulation height (6.60mm), and shrouding dimensions, allowing direct PCB footprint compatibility without redesign.

Q: Are there fastening differences between the parts?

A: The 2SH-C-04-TS-SMT does not specify a fastening type, while the B4B-PH-SM4-TB includes Detent Lock fastening. This feature provides additional mechanical retention without affecting electrical performance or compatibility.

Q: What is the mated stacking height for the substitute part?

A: The B4B-PH-SM4-TB specifies a mated stacking height of 8.6mm. This parameter was not provided for the original part but should be considered in applications with vertical stacking requirements.