Equivalent & Substitute Parts Reference for 2SD1760TLR

Part Overview

The 2SD1760TLR, manufactured by Rohm Semiconductor, is a surface mount NPN Bipolar (BJT) transistor rated for 50 V, 3 A collector current, and 15 W power dissipation. It is housed in a TO-252-3, DPAK (2 Leads + Tab), SC-63 package. The product is currently listed as "Not For New Designs," which necessitates the identification of alternate models for ongoing and future engineering requirements. Finding substitutes with matching key electrical and mechanical parameters ensures continued support for designs relying on this category of device.

Key Parameters

Parameter	Value
Transistor Type	NPN
Voltage - Collector Emitter Breakdown (Max)	50 V
Current - Collector (Ic) (Max)	3 A
DC Current Gain (hFE) (Min)	180 @ 500mA, 3V
Vce Saturation (Max)	1V @ 200mA, 2A
Frequency - Transition	90 MHz
Power - Max	15 W
Operating Temperature	150°C (TJ)
Package / Case	TO-252-3, DPAK (2 Leads + Tab), SC-63
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute transistors are selected strictly by matching or exceeding key parameters relevant to "Transistors, Bipolar (BJT)" in surface mount packages. Substitution grouping considers: transistor type, collector-emitter voltage rating, collector current rating, DC current gain, Vce saturation, transition frequency, maximum power dissipation, operating temperature range, and compatible surface mount package (TO-252-3/DPAK or similar footprint as specified). Compliance criteria such as RoHS status and MSL-1 are also matched.

Parameter Comparison

Part Number	Manufacturer	Transistor Type	V_ce(Max)	I_c(Max)	hFE (Min)	Vce Sat (Max)	Transition Frequency	Power - Max	Operating Temp.	Package / Case	RoHS Status
2SD1760TLR	Rohm Semiconductor	NPN	50 V	3 A	180 @ 500mA, 3V	1V @ 200mA, 2A	90 MHz	15 W	150°C (TJ)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant
2SC5707-TL-E	onsemi	NPN	50 V	8 A	200 @ 500mA, 2V	240mV @ 175mA, 3.5A	330 MHz	1 W	150°C (TJ)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant
2SC6017-TL-E	onsemi	NPN	50 V	10 A	200 @ 1A, 2V	360mV @ 250mA, 5A	200 MHz	950 mW	150°C (TJ)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant
2SC6097-TL-E	onsemi	NPN	60 V	3 A	300 @ 100mA, 2V	135mV @ 100mA, 1A	390 MHz	800 mW	150°C (TJ)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant
2SD1802T-TL-E	onsemi	NPN	50 V	3 A	200 @ 100mA, 2V	500mV @ 100mA, 2A	150 MHz	1 W	150°C (TJ)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant
FCX619TA	Diodes Incorporated	NPN	50 V	3 A	100 @ 2A, 2V	320mV @ 100mA, 2.75A	165 MHz	2 W	-55°C ~ 150°C (TJ)	TO-243AA	ROHS3 Compliant
ZXT690BKQTC	Diodes Incorporated	NPN	45 V	3 A	500 @ 100mA, 2V	350mV @ 150mA, 3A	150 MHz	1.6 W	-55°C ~ 150°C (TJ)	TO-252-3, DPAK (2 Leads + Tab), SC-63	ROHS3 Compliant

Engineering Selection Recommendations

The 2SD1760TLR is not recommended for new designs per product status. All substitute parts listed are RoHS3 compliant and have Moisture Sensitivity Level (MSL) 1 (Unlimited). Each substitute possesses matching or exceeding voltage, current, package type, and compliance criteria as specified. Only substitute parts with "Active" product status are suitable for new designs.

Frequently Asked Questions (FAQ)

Q1: What electrical parameters must match for substituting NPN surface mount BJTs in this category?
A1: Key electrical substitution criteria include transistor type, maximum collector-emitter voltage (Vce), maximum collector current (Ic), DC current gain (hFE), Vce saturation voltage, transition frequency, and maximum power.

Q2: Why is the physical package type important when selecting a substitute?
A2: Matching the package type (TO-252-3, DPAK, SC-63, or compatible) ensures compatibility with existing PCB layouts and assembly processes.

Q3: What compliance certifications should be considered for substitutes?
A3: RoHS3 compliance and Moisture Sensitivity Level (MSL) 1 are required to match environmental and manufacturing standards.

Q4: Is it acceptable to select substitutes with higher ratings for Vce, Ic, transition frequency, or hFE?
A4: Substitutes may have higher ratings in these parameters if all other requirements match per the provided specifications.

Q5: Can substitutes with "Not For New Designs" status be used?
A5: Substitute selection for new designs must exclude models flagged as "Not For New Designs" and prioritize those with "Active" status.

Q6: Are footprints other than TO-252-3 applicable for substitution?
A6: Only equivalent footprints, as explicitly indicated in the provided package description (TO-252-3, DPAK, SC-63, SOT-89-3, TO-243AA), are permissible per the specified parameters.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message