2SD1760TLP Equivalent & Substitute Parts Reference

Part Overview

The Rohm Semiconductor 2SD1760TLP is an NPN bipolar junction transistor (BJT), categorized under "Transistors, Bipolar (BJT)", with a maximum collector-emitter voltage of 50 V, a collector current rating of 3 A, and a maximum power dissipation of 15 W. The device is provided in a surface-mount TO-252-3 (DPAK) package, with RoHS3 compliance and unlimited moisture sensitivity. The part status is "Not For New Designs," indicating it is not recommended for future engineering projects and may face issues related to long-term availability. Therefore, identifying equivalent and substitute parts is necessary to ensure continuity in designs where the 2SD1760TLP was originally specified.

Key Parameters

Parameter	2SD1760TLP
Transistor Type	NPN
Voltage - Collector Emitter Breakdown (Max)	50 V
Current - Collector (Ic) (Max)	3 A
Vce Saturation (Max) @ Ib, Ic	1V @ 200mA, 2A
Current - Collector Cutoff (Max)	1µA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce	82 @ 500mA, 3V
Power - Max	15 W
Frequency - Transition	90MHz
Operating Temperature	150°C (TJ)
Mounting Type	Surface Mount
Package / Case	TO-252-3, DPAK (2 Leads + Tab), SC-63
Supplier Device Package	CPT3
RoHS Status	ROHS3 Compliant
MSL	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitute parts for the 2SD1760TLP have been selected strictly based on equivalence and compatibility in the following key parameters:

Transistor Type (NPN)
Voltage - Collector Emitter Breakdown (Max)
Current - Collector (Ic) (Max)
Vce Saturation (Max)
Collector Cutoff Current (ICBO)
DC Current Gain (hFE) at specified operating conditions
Power Dissipation (Max)
Transition Frequency (fT)
Operating Temperature Range
Mounting Type (Surface Mount)
Package or case (TO-252-3, DPAK (2 Leads + Tab), SC-63)
RoHS and REACH compliance

Only substitute models matching these defined electrical, thermal, and package characteristics are included.

Parameter Comparison

Part Number	Manufacturer	Transistor Type	V_CE Breakdown (Max)	I_C (Max)	V_CE(sat) (Test cond.)	ICBO (Max)	h_FE (Min/Test cond.)	P_Max	f_T	Operating Temp (TJ)	Mounting Type	Package	RoHS	MSL	REACH
2SD1760TLP	Rohm Semiconductor	NPN	50 V	3 A	1V @ 200mA, 2A	1µA	82 @ 500mA, 3V	15 W	90MHz	150°C	Surface Mount	TO-252-3, DPAK (2L+Tab), SC-63	ROHS3	1	Unaffected
2SC5707-TL-E	onsemi	NPN	50 V	8 A	240mV @ 175mA, 3.5A	100nA	200 @ 500mA, 2V	1 W	330MHz	150°C	Surface Mount	TO-252-3, DPAK (2L+Tab), SC-63	ROHS3	1	Unaffected
2SC6017-TL-E	onsemi	NPN	50 V	10 A	360mV @ 250mA, 5A	10µA	200 @ 1A, 2V	950 mW	200MHz	150°C	Surface Mount	TO-252-3, DPAK (2L+Tab), SC-63	ROHS3	1	Unaffected
2SC6097-TL-E	onsemi	NPN	60 V	3 A	135mV @ 100mA, 1A	1µA	300 @ 100mA, 2V	800 mW	390MHz	150°C	Surface Mount	TO-252-3, DPAK (2L+Tab), SC-63	ROHS3	1	Unaffected
2SD1802T-TL-E	onsemi	NPN	50 V	3 A	500mV @ 100mA, 2A	1µA	200 @ 100mA, 2V	1 W	150MHz	150°C	Surface Mount	TO-252-3, DPAK (2L+Tab), SC-63	ROHS3	1	Unaffected
ZXT690BKQTC	Diodes Incorporated	NPN	45 V	3 A	350mV @ 150mA, 3A	20nA	500 @ 100mA, 2V	1.6 W	150MHz	150°C	Surface Mount	TO-252-3, DPAK (2L+Tab), SC-63	ROHS3	1	Unaffected

Engineering Selection Recommendations

All listed substitute transistors are categorized as NPN BJTs and are surface-mount devices in TO-252-3, DPAK (2 Leads + Tab), SC-63 package. Each is RoHS3 compliant and REACH unaffected, with an MSL rating of 1 (unlimited) and a maximum junction temperature of 150°C. Product status varies: the 2SC6017-TL-E is obsolete; all other substitutes are currently active. Engineering selections should prioritize active and compliant devices for ongoing and new designs.

Frequently Asked Questions (FAQ)

Q: Which key parameters must be matched for substituting the 2SD1760TLP with another transistor?
A: The substitute must match the 2SD1760TLP in transistor type, collector-emitter breakdown voltage, collector current, power rating, transition frequency, package and mounting type, and environmental compliance statuses.

Q: Are all substitute parts compatible in terms of physical footprint?
A: All listed substitutes are provided in a TO-252-3, DPAK (2 Leads + Tab), SC-63 surface-mount package, ensuring direct compatibility for PCB assembly.

Q: Does environmental compliance (RoHS, REACH) affect substitute selection?
A: Yes, all substitutes are RoHS3 compliant and REACH unaffected, fulfilling requirements for environmental standards in electronic manufacturing.

Q: Should obsolete substitute parts be selected over active ones?
A: Only active status parts should be considered where long-term supply is necessary. Obsolete parts are not recommended for new designs.

Q: Are there any differences in device ratings among substitutes related to power handling or transition frequency?
A: Substitute parameters such as power, gain, and frequency may differ but all comply within or above the ranges specified for the 2SD1760TLP where substitution is allowed by the provided parameters.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message