2SD0601ARL Equivalent & Substitute Parts

Part Overview

The 2SD0601ARL is an NPN bipolar junction transistor manufactured by Panasonic Electronic Components, designed for general-purpose switching and amplification applications. This device operates at 50 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and 200 mW power dissipation. The part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The 2SD0601ARL is packaged in the Mini3-G1 surface mount configuration, which corresponds to the TO-236-3 (SC-59, SOT-23-3) standard package.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN	—
Voltage - Collector Emitter Breakdown (Max)	50	V
Current - Collector (Ic) (Max)	100	mA
Power - Max	200	mW
Frequency - Transition	150	MHz
DC Current Gain (hFE) (Min) @ Ic, Vce	210 @ 2mA, 10V	—
Vce Saturation (Max) @ Ib, Ic	300mV @ 10mA, 100mA	—
Current - Collector Cutoff (Max)	100	µA
Operating Temperature (Max)	150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the 2SD0601ARL is determined by electrical and mechanical compatibility within the following criteria:

Primary Substitution Criteria (Direct Equivalents):

Transistor Type: NPN
Voltage - Collector Emitter Breakdown (Max): ≥ 50 V
Current - Collector (Ic) (Max): ≥ 100 mA
Power - Max: ≥ 200 mW
DC Current Gain (hFE) (Min): ≥ 210 @ 2mA, 10V
Package / Case: TO-236-3, SC-59, SOT-23-3
Mounting Type: Surface Mount
Moisture Sensitivity Level (MSL): 1 (Unlimited)

Secondary Substitution Criteria (Similar Parts with Parameter Variations): Parts that meet the primary electrical requirements but may have different frequency response, saturation voltage, or operating temperature specifications are classified as similar substitutes. These parts are suitable for applications where the specific parameter variation does not impact circuit performance.

Excluded from Substitution: Parts with collector-emitter breakdown voltage less than 50 V or maximum collector current less than 100 mA do not meet the minimum electrical requirements and are not suitable substitutes.

Parameter Comparison

Part Number	Manufacturer	Vce Breakdown (Max)	Ic (Max)	Power (Max)	hFE (Min)	Frequency (MHz)	Package	Status
2SD0601ARL	Panasonic	50 V	100 mA	200 mW	210 @ 2mA, 10V	150	TO-236-3	Obsolete
2PD601ARL,215	Nexperia USA Inc.	50 V	100 mA	250 mW	210 @ 2mA, 10V	100	TO-236-3	Active
2PD601ART,215	Nexperia USA Inc.	50 V	100 mA	250 mW	210 @ 2mA, 10V	100	TO-236-3	Active
MSD601-RT1G	onsemi	50 V	100 mA	200 mW	210 @ 2mA, 10V	—	TO-236-3	Active
2PD601BRL,215	Nexperia USA Inc.	50 V	200 mA	250 mW	210 @ 2mA, 10V	250	TO-236-3	Active
2SC1623-L6-TP	Micro Commercial Co	50 V	100 mA	200 mW	—	250	TO-236-3	Active
BC847A RFG	Taiwan Semiconductor Corporation	45 V	100 mA	200 mW	110 @ 2mA, 5V	100	TO-236-3	Active
BC847B-TP	Micro Commercial Co	45 V	100 mA	225 mW	200 @ 2mA, 5V	100	TO-236-3	Active
BC847CLT1G	onsemi	45 V	100 mA	300 mW	420 @ 2mA, 5V	100	TO-236-3	Active
BC847CLT3G	onsemi	45 V	100 mA	300 mW	420 @ 2mA, 5V	100	TO-236-3	Active
BC848BT116	Rohm Semiconductor	30 V	100 mA	350 mW	200 @ 2mA, 5V	200	TO-236-3	Active

Engineering Selection Recommendations

Direct Equivalent Substitutes (Recommended Priority):

The 2PD601ARL,215 and 2PD601ART,215 from Nexperia USA Inc. are direct electrical equivalents with identical voltage and current ratings. Both parts are active products with AEC-Q101 automotive qualification and ROHS3 compliance. The 2PD601ARL,215 offers 30,400 units in stock, while the 2PD601ART,215 provides 10,200 units. These parts feature 250 mW power dissipation, exceeding the original 200 mW specification, and are suitable for direct replacement in all applications.

The MSD601-RT1G from onsemi is an active product with identical electrical specifications to the 2SD0601ARL, including 50 V breakdown voltage, 100 mA collector current, and 200 mW power dissipation. This part provides 16,401 units in stock and is ROHS3 compliant.

Similar Substitutes (Application-Dependent):

The 2PD601BRL,215 from Nexperia USA Inc. is suitable for applications requiring higher collector current capability (200 mA maximum) while maintaining the 50 V voltage rating. This part is AEC-Q101 qualified and ROHS3 compliant with 10,999 units available.

The 2SC1623-L6-TP from Micro Commercial Co meets the 50 V and 100 mA specifications with 250 MHz transition frequency and 200 mW power dissipation. This part is ROHS3 compliant with 4,300 units in stock.

Limited Substitutes (Voltage-Reduced Applications):

The BC847A RFG, BC847B-TP, BC847CLT1G, and BC847CLT3G are suitable only for applications where the circuit design accommodates a 45 V collector-emitter breakdown voltage instead of 50 V. These parts are active products with ROHS3 compliance and adequate current and power ratings. The BC847CLT1G and BC847CLT3G offer enhanced power dissipation (300 mW) and higher current gain (420 @ 2mA, 5V).

Not Recommended:

The BC848BT116 from Rohm Semiconductor has a maximum collector-emitter breakdown voltage of 30 V, which is below the 50 V requirement of the 2SD0601ARL and is not suitable for direct substitution in voltage-sensitive applications.

Frequently Asked Questions (FAQ)

Q: Can the 2PD601ARL,215 directly replace the 2SD0601ARL in all applications?

A: Yes. The 2PD601ARL,215 meets or exceeds all electrical specifications of the 2SD0601ARL, including voltage, current, and power ratings. Both parts use the same TO-236-3 package and have identical DC current gain specifications. The 2PD601ARL,215 is an active product with automotive qualification (AEC-Q101) and ROHS3 compliance.

Q: What is the difference between the 2PD601ARL,215 and 2PD601ART,215?

A: Both parts are electrically identical with 50 V breakdown voltage, 100 mA collector current, and 250 mW power dissipation. The primary difference is the packaging designation (ARL vs. ART) and inventory availability. The 2PD601ARL,215 has 30,400 units in stock, while the 2PD601ART,215 has 10,200 units.

Q: Can I use BC847 series transistors as substitutes for the 2SD0601ARL?

A: BC847 series transistors (BC847A RFG, BC847B-TP, BC847CLT1G, BC847CLT3G) have a maximum collector-emitter breakdown voltage of 45 V, which is 5 V lower than the 2SD0601ARL specification of 50 V. These parts are suitable only if the circuit design operates below 45 V or if the reduced voltage margin is acceptable for the application.

Q: What is the significance of the MSL (Moisture Sensitivity Level) rating?

A: All listed substitute parts have MSL 1 (Unlimited), matching the 2SD0601ARL. This rating indicates that the components have unlimited shelf life and do not require special moisture control during storage or handling, simplifying logistics and inventory management.

Q: Why is the BC848BT116 not recommended as a substitute?

A: The BC848BT116 has a maximum collector-emitter breakdown voltage of 30 V, which is 20 V below the 50 V requirement of the 2SD0601ARL. This part is not suitable for applications designed for 50 V operation and would result in reduced circuit reliability and potential component failure.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All active substitute parts listed (2PD601ARL,215, 2PD601ART,215, MSD601-RT1G, 2PD601BRL,215, 2SC1623-L6-TP, BC847A RFG, BC847B-TP, BC847CLT1G, BC847CLT3G, and BC848BT116) are ROHS3 compliant. The original 2SD0601ARL is obsolete and does not have a current ROHS status.

Q: What is the difference between the MSD601-RT1G and the 2PD601ARL,215?

A: Both parts meet the core electrical specifications of the 2SD0601ARL with 50 V breakdown voltage and 100 mA collector current. The MSD601-RT1G from onsemi matches the original 200 mW power specification, while the 2PD601ARL,215 from Nexperia provides 250 mW. The 2PD601ARL,215 includes AEC-Q101 automotive qualification, while the MSD601-RT1G does not specify this certification.

Q: Can the 2PD601BRL,215 be used in place of the 2SD0601ARL?

A: The 2PD601BRL,215 is suitable for applications where higher collector current capability (200 mA vs. 100 mA) is beneficial or required. It maintains the 50 V voltage rating and exceeds the power dissipation requirement. This part is recommended for designs that may require increased current headroom while maintaining voltage compatibility.

Q: What packaging considerations apply to these substitute parts?

A: All listed substitute parts use the TO-236-3 (SC-59, SOT-23-3) surface mount package, which is mechanically and electrically compatible with the 2SD0601ARL Mini3-G1 package. No PCB layout modifications are required for substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message