2SD0601AQL Equivalent & Substitute Parts

Part Overview

The 2SD0601AQL is an NPN bipolar junction transistor manufactured by Panasonic Electronic Components, designed for general-purpose switching and amplification applications. This device operates at 50 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and transition frequency of 150 MHz. The part is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain functional compatibility within specified electrical and mechanical parameters. Substitute parts must satisfy the same or superior electrical ratings while maintaining compatible packaging and mounting characteristics.

Key Parameters

Parameter	2SD0601AQL	Unit
Transistor Type	NPN	—
Voltage - Collector Emitter Breakdown (Max)	50	V
Current - Collector (Ic) (Max)	100	mA
Vce Saturation (Max) @ Ib, Ic	300mV @ 10mA, 100mA	V
Current - Collector Cutoff (Max)	100	µA
DC Current Gain (hFE) (Min) @ Ic, Vce	160 @ 2mA, 10V	—
Power - Max	200	mW
Frequency - Transition	150	MHz
Operating Temperature (TJ)	150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—
Product Status	Obsolete	—

Substitute Part Grouping Explanation

Substitution of the 2SD0601AQL is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Transistor Type: NPN (mandatory match)
Voltage - Collector Emitter Breakdown: Equal to or greater than 50 V
Current - Collector (Ic) (Max): Equal to or greater than 100 mA
Power - Max: Equal to or greater than 200 mW
Mounting Type: Surface Mount (mandatory match)
Package / Case: TO-236-3, SC-59, or SOT-23-3 (mandatory match)
Moisture Sensitivity Level: 1 (Unlimited) or equivalent

Secondary Compatibility Parameters:

Vce Saturation: Lower or equal values indicate improved performance
DC Current Gain (hFE): Higher values indicate improved performance
Frequency - Transition: Higher values indicate improved performance
Operating Temperature: Range must accommodate 150°C maximum junction temperature

Substitute parts are grouped into two categories:

Category A - Direct Voltage Rating Match (50 V): Parts maintaining the 50 V collector-emitter breakdown voltage specification: 2SC1623-L6-TP and MSC2712GT1G.

Category B - Reduced Voltage Rating (45 V or lower): Parts with collector-emitter breakdown voltage below 50 V are suitable for applications where the circuit design operates below the reduced voltage threshold: BC847A RFG, BC847B-TP, BC847CLT1G, BC847CLT3G, BC850BLT1G, BC850CLT1G, and BCW72LT1G.

Category C - Significantly Reduced Voltage Rating (30 V): BC848BT116 operates at 30 V maximum collector-emitter breakdown voltage and is suitable only for circuits designed for this lower voltage specification.

Parameter Comparison

Part Number	Manufacturer	Vce(BR)max (V)	Ic(Max) (mA)	Vce Sat (Max)	hFE(Min)	Power (mW)	Freq (MHz)	Temp (°C)	Package	Status
2SD0601AQL	Panasonic	50	100	300mV @ 10mA, 100mA	160 @ 2mA, 10V	200	150	150	SOT-23-3	Obsolete
2SC1623-L6-TP	Micro Commercial Co	50	100	300mV @ 10mA, 100mA	—	200	250	-55 to 150	SOT-23	Active
BC847A RFG	Taiwan Semiconductor	45	100	500mV @ 5mA, 100mA	110 @ 2mA, 5V	200	100	-55 to 150	SOT-23	Active
BC847B-TP	Micro Commercial Co	45	100	500mV @ 5mA, 100mA	200 @ 2mA, 5V	225	100	-55 to 150	SOT-23	Active
BC847CLT1G	onsemi	45	100	600mV @ 5mA, 100mA	420 @ 2mA, 5V	300	100	-55 to 150	SOT-23-3	Active
BC847CLT3G	onsemi	45	100	600mV @ 5mA, 100mA	420 @ 2mA, 5V	300	100	-55 to 150	SOT-23-3	Active
BC848BT116	Rohm Semiconductor	30	100	600mV @ 5mA, 100mA	200 @ 2mA, 5V	350	200	150	SST3	Active
BC850BLT1G	onsemi	45	100	600mV @ 5mA, 100mA	200 @ 2mA, 5V	225	100	-55 to 150	SOT-23-3	Active
BC850CLT1G	onsemi	45	100	600mV @ 5mA, 100mA	420 @ 2mA, 5V	225	100	-55 to 150	SOT-23-3	Active
BCW72LT1G	onsemi	45	100	250mV @ 500µA, 10mA	200 @ 2mA, 5V	300	300	-55 to 150	SOT-23-3	Active
MSC2712GT1G	onsemi	50	100	500mV @ 10mA, 100mA	200 @ 2mA, 6V	200	50	150	SC-59	Active

Engineering Selection Recommendations

For Direct Replacement (50 V Voltage Rating Requirement):

2SC1623-L6-TP is the primary substitute when the circuit design requires 50 V collector-emitter breakdown voltage. This part is manufactured by Micro Commercial Co and maintains active product status with RoHS3 compliance. The 2SC1623-L6-TP provides superior transition frequency (250 MHz versus 150 MHz) and extended operating temperature range (-55°C to 150°C). Vce saturation characteristics remain identical to the original specification.

MSC2712GT1G is an alternative 50 V substitute manufactured by onsemi with active product status and RoHS3 compliance. This part maintains the 50 V voltage rating and 200 mW power specification. The transition frequency is reduced to 50 MHz, making this selection appropriate only for applications not requiring the original 150 MHz performance.

For Reduced Voltage Applications (45 V Voltage Rating):

BC847B-TP, BC847CLT1G, BC847CLT3G, BC850BLT1G, and BC850CLT1G are active substitutes suitable for circuits designed to operate at 45 V or lower collector-emitter breakdown voltage. All are manufactured by established semiconductor suppliers (Micro Commercial Co or onsemi) with RoHS3 compliance and extended operating temperature ranges. These parts provide equal or superior DC current gain and power ratings.

BCW72LT1G offers the highest transition frequency (300 MHz) among the 45 V alternatives, with improved Vce saturation characteristics (250 mV at specified conditions). This part is manufactured by onsemi with active status and RoHS3 compliance.

For Reduced Voltage Applications (30 V Voltage Rating):

BC848BT116 is suitable only for circuits designed for 30 V maximum collector-emitter breakdown voltage. This part is manufactured by Rohm Semiconductor with active product status and RoHS3 compliance. The 30 V rating represents a significant reduction from the original 50 V specification and must be verified against circuit design requirements.

Compliance and Availability:

All recommended substitutes maintain MSL 1 (Unlimited) moisture sensitivity classification. All active substitutes carry RoHS3 compliance and REACH Unaffected status. Inventory availability is confirmed for all listed alternatives.

Frequently Asked Questions (FAQ)

Q: Can BC847B-TP directly replace 2SD0601AQL in all applications?

A: BC847B-TP is a functional substitute for applications where the circuit design operates at 45 V or lower collector-emitter breakdown voltage. The original 2SD0601AQL is rated for 50 V. If the circuit design requires the full 50 V rating, BC847B-TP is not suitable. Verify the maximum voltage present at the collector-emitter junction in your specific application.

Q: What is the difference between BC847CLT1G and BC847CLT3G?

A: Both parts are manufactured by onsemi with identical electrical specifications. The difference is in the manufacturing date code or tape reel configuration. Both are suitable substitutes with the same 45 V voltage rating, 100 mA collector current, and 100 MHz transition frequency.

Q: Why does MSC2712GT1G have a lower transition frequency (50 MHz) than the original part (150 MHz)?

A: MSC2712GT1G is designed for lower-frequency applications. While it maintains the 50 V voltage rating and 100 mA collector current, the reduced transition frequency limits its use to circuits operating below 50 MHz. This part is suitable only if your application does not require the 150 MHz performance of the original device.

Q: Is BC848BT116 a suitable substitute for the 2SD0601AQL?

A: BC848BT116 has a maximum collector-emitter breakdown voltage of 30 V, compared to 50 V for the 2SD0601AQL. This represents a significant voltage rating reduction. BC848BT116 is suitable only if your circuit design operates entirely below 30 V at the collector-emitter junction. Verify your circuit design voltage requirements before selecting this part.

Q: What does the package designation "SOT-23-3" mean, and is it compatible with "SC-59"?

A: SOT-23-3 and SC-59 are both surface-mount package designations for three-terminal devices in the TO-236 family. These packages are mechanically and electrically compatible for PCB mounting. The 2SD0601AQL is specified as TO-236-3, SC-59, SOT-23-3, indicating all three designations refer to the same physical package.

Q: Are all substitute parts RoHS3 compliant?

A: All active substitute parts listed carry RoHS3 compliance certification. The original 2SD0601AQL is obsolete and does not carry current compliance certifications. RoHS3 compliance is confirmed for 2SC1623-L6-TP, BC847A RFG, BC847B-TP, BC847CLT1G, BC847CLT3G, BC848BT116, BC850BLT1G, BC850CLT1G, BCW72LT1G, and MSC2712GT1G.

Q: What is the significance of the DC Current Gain (hFE) differences between substitute parts?

A: DC Current Gain (hFE) determines the amplification factor of the transistor. Higher hFE values (such as 420 in BC847CLT1G and BC850CLT1G) indicate greater current amplification compared to lower values (such as 110 in BC847A RFG). For switching applications, higher hFE provides faster saturation. For linear amplification, the specific hFE requirement depends on circuit design. Verify your application's hFE requirements before selection.

Q: Can I use 2SC1623-L6-TP as a direct pin-for-pin replacement?

A: 2SC1623-L6-TP maintains the same SOT-23 package and pin configuration as the 2SD0601AQL. Pin-for-pin replacement is mechanically and electrically compatible. However, verify that your PCB layout and circuit design accommodate the part's electrical characteristics, particularly the Vce saturation and hFE specifications.

Q: What inventory levels are available for substitute parts?

A: Inventory availability is confirmed as follows: 2SC1623-L6-TP (4,300 pcs), BC847A RFG (9,851 pcs), BC847B-TP (1,000,100 pcs), BC847CLT1G (80,100 pcs), BC847CLT3G (90,200 pcs), BC848BT116 (6,490 pcs), BC850BLT1G (65,200 pcs), BC850CLT1G (254,300 pcs), BCW72LT1G (65,100 pcs), and MSC2712GT1G (65,100 pcs).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message