2SCR586JGTLL Equivalent & Substitute Parts

Part Overview

The 2SCR586JGTLL is an NPN bipolar junction transistor (BJT) manufactured by Rohm Semiconductor, designed for general-purpose switching and amplification applications. This surface mount device operates at collector currents up to 5 A with a maximum collector-emitter breakdown voltage of 80 V and a maximum power dissipation of 40 W. The device is qualified to AEC-Q101 automotive standards and carries active product status. Substitute parts are identified based on identical electrical performance parameters and compatible mechanical packaging specifications, enabling direct replacement in circuit designs where component availability or supply chain considerations necessitate alternative sourcing.

Substiute Parts

2SCR586JGTLL

Rohm SemiconductorIn Stock: 12352SCR586JGTLL Datasheet

Current PartRFQ

2SCR586JFRGTLL

Rohm SemiconductorIn Stock: 19312SCR586JFRGTLL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 2SCR586JGTLL is determined by equivalence across all critical electrical and mechanical parameters. The substitute part 2SCR586JFRGTLL maintains identical performance specifications across the following key parameters:

• Maximum collector current: 5 A
• Maximum collector-emitter breakdown voltage: 80 V
• Saturation voltage: 300mV @ 100mA, 2A
• Collector cutoff current: 1 µA (ICBO)
• Minimum DC current gain: 120 @ 500mA, 3V
• Maximum power dissipation: 40 W
• Transition frequency: 200 MHz
• Operating temperature range: 150°C (TJ)
• Package type: TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
• Surface mount configuration
• Automotive grade with AEC-Q101 qualification
• ROHS3 compliance and MSL 1 rating

The primary distinction between the main part and substitute lies in packaging format: the 2SCR586JGTLL is supplied in Tape & Reel (TR) format, while the 2SCR586JFRGTLL is supplied in Cut Tape (CT) & Digi-Reel® format. Both variants share the identical base product number 2SCR586 and are manufactured by Rohm Semiconductor.

Parameter Comparison

Engineering Selection Recommendations

Both the 2SCR586JGTLL and 2SCR586JFRGTLL are active products manufactured by Rohm Semiconductor with identical electrical specifications and mechanical compatibility. Selection between these parts is based on supply chain and packaging requirements rather than functional performance.

The 2SCR586JGTLL in Tape & Reel format is suitable for high-volume automated assembly operations where continuous reel feeding is required. The 2SCR586JFRGTLL in Cut Tape & Digi-Reel® format accommodates lower-volume production runs, prototyping, and applications where smaller quantity increments are necessary.

Both devices maintain full compliance with AEC-Q101 automotive qualification standards, ROHS3 environmental directives, and unlimited moisture sensitivity level (MSL 1) handling requirements. The identical electrical parameters—including 5 A maximum collector current, 80 V breakdown voltage, 40 W power dissipation, and 200 MHz transition frequency—ensure direct functional equivalence in all circuit applications.

Frequently Asked Questions (FAQ)

Q: Can the 2SCR586JFRGTLL be used as a direct replacement for the 2SCR586JGTLL in production assemblies?

A: Yes. Both parts share identical electrical specifications, mechanical package dimensions (TO-263AB), and automotive qualification status. The only difference is packaging format (Tape & Reel versus Cut Tape & Digi-Reel®). Direct substitution is electrically and mechanically valid.

Q: Are there any performance differences between these two part numbers?

A: No. The electrical parameters are identical across all specifications: maximum collector current (5 A), breakdown voltage (80 V), saturation voltage (300mV @ 100mA, 2A), DC current gain (120 @ 500mA, 3V), power dissipation (40 W), and transition frequency (200 MHz). Performance in circuit operation is equivalent.

Q: What is the significance of the different packaging formats?

A: Tape & Reel (TR) format is optimized for high-speed automated pick-and-place assembly with continuous component feeding. Cut Tape (CT) & Digi-Reel® format is designed for lower-volume production, manual assembly, or applications requiring smaller quantity purchases. The physical component and electrical performance remain unchanged.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the 2SCR586JGTLL and 2SCR586JFRGTLL carry automotive grade classification and AEC-Q101 qualification, meeting automotive industry reliability and quality standards.

Q: Do these parts require different handling or storage procedures?

A: No. Both parts carry identical Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no special moisture control requirements during storage or handling. ROHS3 compliance and REACH unaffected status are identical for both variants.

Q: Can the 2SCR586JFRGTLL be used in designs originally specified for the 2SCR586JGTLL?

A: Yes. The identical electrical specifications, package type (TO-263AB), and automotive qualification ensure full compatibility. Circuit performance, thermal characteristics, and reliability are equivalent.