2SCR513RHZGTL Equivalent & Substitute Parts

Part Overview

The 2SCR513RHZGTL is an NPN bipolar junction transistor (BJT) manufactured by Rohm Semiconductor, designed for general-purpose switching and amplification applications. This surface mount device operates at a maximum collector current of 1 A with a collector-emitter breakdown voltage of 50 V and a maximum power dissipation of 500 mW. The device is currently in active production status and carries automotive-grade qualification under AEC-Q101 standards. Substitute parts are identified to provide alternative sourcing options when the primary part number is unavailable or when packaging format requirements differ.

Substiute Parts

2SCR513RHZGTL

Rohm SemiconductorIn Stock: 35752SCR513RHZGTL Datasheet

Current PartRFQ

2SCR513RTL

Rohm SemiconductorIn Stock: 61522SCR513RTL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 2SCR513RHZGTL is determined by electrical and mechanical parameter equivalence. The substitute part 2SCR513RTL shares identical electrical specifications across all critical parameters: NPN transistor type, 1 A maximum collector current, 50 V collector-emitter breakdown voltage, 350 mV saturation voltage at specified bias conditions, 1 µA collector cutoff current, 180 minimum DC current gain, 500 mW maximum power dissipation, and 360 MHz transition frequency. Both devices operate at a maximum junction temperature of 150°C and utilize the SC-96 package with TSMT3 supplier device package designation.

The primary distinction between these parts is packaging format. The 2SCR513RHZGTL is supplied in Tape & Reel (TR) format, while the 2SCR513RTL is supplied in Cut Tape (CT) and Digi-Reel® format. Both maintain identical surface mount mounting type and TSMT3 package specifications. Compliance parameters including RoHS3 status, MSL rating of 1, REACH unaffected status, and automotive-grade AEC-Q101 qualification are equivalent across both part numbers.

Parameter Comparison

Engineering Selection Recommendations

Both the 2SCR513RHZGTL and 2SCR513RTL are active production devices manufactured by Rohm Semiconductor with identical electrical and thermal specifications. Selection between these part numbers is determined by packaging and supply chain requirements rather than electrical performance.

The 2SCR513RHZGTL in Tape & Reel format is suitable for high-volume automated assembly operations where continuous reel feeding is required. The 2SCR513RTL in Cut Tape and Digi-Reel® format accommodates lower-volume production runs, manual assembly processes, or applications requiring smaller quantity procurement.

Both devices carry automotive-grade qualification under AEC-Q101 standards and maintain full RoHS3 compliance with unlimited moisture sensitivity rating (MSL 1). These certifications confirm suitability for automotive and industrial applications requiring regulatory compliance. The electrical parameters—including 1 A collector current capacity, 50 V breakdown voltage, 500 mW power dissipation, and 360 MHz transition frequency—are identical, ensuring direct functional equivalence in circuit applications.

Frequently Asked Questions (FAQ)

Q: Can the 2SCR513RTL be used as a direct replacement for the 2SCR513RHZGTL in production?

A: Yes. Both part numbers share identical electrical specifications, thermal ratings, package dimensions (SC-96 TSMT3), and compliance certifications. The only difference is packaging format (Tape & Reel versus Cut Tape/Digi-Reel®). Direct substitution is electrically and mechanically valid.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) format supplies components on continuous reels suitable for automated pick-and-place assembly systems. Cut Tape (CT) and Digi-Reel® formats provide components in smaller quantities on tape segments or alternative reel configurations, typically for lower-volume or manual assembly operations.

Q: Are both parts suitable for automotive applications?

A: Yes. Both the 2SCR513RHZGTL and 2SCR513RTL carry automotive-grade qualification under AEC-Q101 standards, confirming suitability for automotive circuit applications.

Q: Do these parts have identical thermal performance?

A: Yes. Both devices operate at a maximum junction temperature of 150°C and share identical power dissipation ratings of 500 mW, ensuring equivalent thermal behavior in circuit applications.

Q: Are there any compliance or regulatory differences between these part numbers?

A: No. Both parts maintain identical RoHS3 compliance status, REACH unaffected designation, MSL rating of 1 (unlimited moisture sensitivity), and automotive-grade AEC-Q101 qualification.

Q: What are the key electrical parameters that define substitution eligibility?

A: Substitution is determined by matching transistor type (NPN), maximum collector current (1 A), collector-emitter breakdown voltage (50 V), saturation voltage (350 mV @ specified bias), collector cutoff current (1 µA), DC current gain (180 minimum), power dissipation (500 mW), and transition frequency (360 MHz).