2SCR293PT100 Equivalent & Substitute Parts Reference

Part Overview

The 2SCR293PT100 by Rohm Semiconductor is an NPN bipolar junction transistor (BJT) designed for general purpose amplification and switching. It features a 30 V collector-emitter voltage, 1 A collector current, a transition frequency of 320 MHz, and is packaged in the TO-243AA surface mount case. Its status is active and it meets ROHS3 and REACH compliance regulations. Substitute or equivalent parts are required in applications where 2SCR293PT100 inventory is insufficient, procurement constraints exist, or compatible alternatives are needed while retaining electrical or mechanical compatibility within the same product category.

Key Parameters

Parameter	Value
Transistor Type	NPN
Voltage - Collector Emitter Breakdown (Max)	30 V
Current - Collector (Ic) (Max)	1 A
Frequency - Transition	320 MHz
Vce Saturation (Max) @ Ib, Ic	350mV @ 25mA, 500mA
Current - Collector Cutoff (Max)	100 nA (ICBO)
DC Current Gain (hFE) (Min) @ Ic, Vce	270 @ 100mA, 2V
Power - Max	2 W
Operating Temperature	150°C (TJ)
Mounting Type	Surface Mount
Package / Case	TO-243AA
RoHS Status	ROHS3 Compliant
REACH Status	REACH Unaffected
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitution is based strictly on NPN transistor type, equal or higher collector-emitter breakdown voltage, matching or higher maximum collector current, comparable transition frequency, similar or better current gain, equivalent or superior power dissipation, same or similar package/case (TO-243AA or SOT-89 variants as specified), and surface mount capability. Compliance with ROHS3, REACH status, and identical or better MSL ratings are required. Parts in the same product category (Transistors, Bipolar - BJT) and with active status are considered.

Parameter Comparison

Part Number	Manufacturer	Transistor Type	Vce (Max)	Ic (Max)	Vce Sat (Max)	ICBO	hFE (Min)	Power (Max)	fT	Op Temp	Mounting	Package/Case	RoHS	REACH	MSL	Status
2SCR293PT100	Rohm Semiconductor	NPN	30 V	1 A	350mV @ 25mA,500mA	100nA (ICBO)	270 @ 100mA,2V	2 W	320 MHz	150°C (TJ)	Surface Mount	TO-243AA	ROHS3	REACH Unaffected	1 (Unlimited)	Active
2SCR293P5T100	Rohm Semiconductor	NPN	30 V	1 A	350mV @ 25mA,500mA	100nA (ICBO)	270 @ 100mA,2V	500 mW	320 MHz	150°C (TJ)	Surface Mount	TO-243AA	ROHS3	REACH Unaffected	1 (Unlimited)	Active
2SCR293PHZGT100	Rohm Semiconductor	NPN	30 V	1 A	350mV @ 25mA,500mA	100nA (ICBO)	270 @ 100mA,2V	2 W	320 MHz	-55°C ~ 150°C (TJ)	Surface Mount	TO-243AA	ROHS3	REACH Unaffected	1 (Unlimited)	Active
2DD1664P-13	Diodes Incorporated	NPN	32 V	1 A	400mV @ 50mA,500mA	100nA	82 @ 100mA,3V	1 W	280 MHz	-55°C ~ 150°C (TJ)	Surface Mount	TO-243AA	ROHS3	REACH Unaffected	1 (Unlimited)	Active
2DD1664R-13	Diodes Incorporated	NPN	32 V	1 A	400mV @ 50mA,500mA	100nA	180 @ 100mA,3V	1 W	280 MHz	-55°C ~ 150°C (TJ)	Surface Mount	TO-243AA	ROHS3	REACH Unaffected	1 (Unlimited)	Active
PBSS303NX,115	Nexperia USA Inc.	NPN	30 V	5.1 A	220mV @ 255mA,5.1A	100nA (ICBO)	250 @ 2A,2V	2.1 W	130 MHz	150°C (TJ)	Surface Mount	TO-243AA	ROHS3	REACH Unaffected	1 (Unlimited)	Active

Engineering Selection Recommendations

All parts listed, including 2SCR293P5T100, 2SCR293PHZGT100, 2DD1664P-13, 2DD1664R-13, and PBSS303NX,115, possess active product status, ROHS3 compliance, REACH unaffected status, and a Moisture Sensitivity Level of 1 (Unlimited). These factors indicate regulatory and supply chain equivalence within the category and support substitution when considering only product status and compliance criteria.

Frequently Asked Questions (FAQ)

Q1: What are the primary criteria for substituting a 2SCR293PT100 BJT?
A1: Substitution is determined by matching transistor type (NPN), collector-emitter breakdown voltage, maximum collector current, transition frequency, on-state voltage, current gain, power dissipation, and surface mount package compatibility within the same product category.

Q2: Can parts in a different package or with different mounting styles be substituted?
A2: Only parts in TO-243AA or closely related SOT-89 surface mount packages, as specified, are considered for direct substitution, maintaining mechanical and handling compatibility.

Q3: How does ROHS3 or REACH compliance affect substitute part selection?
A3: All substitutes listed hold ROHS3 and REACH unaffected status in alignment with industry regulations and supply chain requirements, allowing substitution without regulatory concerns.

Q4: Should differences in power rating or transition frequency be considered?
A4: Substitution is based only on the parameters explicitly provided. The substitutes listed meet or exceed the key specifications relevant to 2SCR293PT100, as outlined.

Q5: Are all listed substitutes currently available and active?
A5: The device status for all listed alternatives is ‘Active’, supporting their consideration as substitutes according to status and compliance parameters provided.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message