Equivalent & Substitute Parts for 2SC6036G0L

Part Overview

The 2SC6036G0L is an NPN bipolar junction transistor manufactured by Panasonic Electronic Components, designed for general-purpose switching and amplification applications. This device operates at 12 V collector-emitter breakdown voltage with a maximum collector current of 500 mA and 100 mW power dissipation in a surface mount SSSMini3-F2 package (SOT-723 case).

The 2SC6036G0L is classified as obsolete. Locating equivalent or substitute components is necessary to support ongoing production requirements, maintenance operations, and design continuity for applications currently utilizing this transistor.

Substiute Parts

2SC6036G0L

Panasonic Electronic ComponentsIn Stock: 902212SC6036G0L Datasheet

Current PartRFQ

2SC5663T2L

Rohm SemiconductorIn Stock: 76202SC5663T2L Datasheet

DirectRFQ

2SC5658M3T5G

onsemiIn Stock: 85052SC5658M3T5G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 2SC6036G0L is evaluated based on electrical and mechanical compatibility within the constraints of the provided parameters. The following criteria determine substitution eligibility:

Primary Substitution Criteria:

• Transistor type must be NPN
• Package / Case must be SOT-723 (surface mount)
• Mounting type must be surface mount
• Moisture sensitivity level must be 1 (Unlimited) or equivalent

Electrical Compatibility Criteria:

• Voltage - Collector Emitter Breakdown (Max) must be greater than or equal to 12 V
• Current - Collector (Ic) (Max) must be greater than or equal to 500 mA
• DC Current Gain (hFE) (Min) must be greater than or equal to 270 @ 10mA, 2V
• Vce Saturation (Max) must be less than or equal to 250mV @ 10mA, 200mA
• Current - Collector Cutoff (Max) must be less than or equal to 100nA (ICBO)

Direct Substitute (Electrical and Mechanical Equivalence): The 2SC5663T2L from Rohm Semiconductor meets all primary and electrical compatibility criteria and is classified as an active product.

Similar Part (Partial Compatibility): The 2SC5658M3T5G from onsemi does not meet the electrical compatibility criteria for collector current and collector-emitter breakdown voltage and is classified as a similar part rather than a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitute: 2SC5663T2L (Rohm Semiconductor)

The 2SC5663T2L is the appropriate direct substitute for the obsolete 2SC6036G0L. This component satisfies all electrical and mechanical compatibility requirements:

• Identical collector-emitter breakdown voltage (12 V)
• Identical maximum collector current (500 mA)
• Identical DC current gain specification (270 @ 10mA, 2V)
• Identical saturation voltage (250mV @ 10mA, 200mA)
• Identical collector cutoff current (100 nA)
• Identical package and mounting configuration (SOT-723, surface mount)
• Active product status ensures ongoing availability
• RoHS3 compliant and REACH unaffected, providing regulatory alignment
• Enhanced operating temperature range (150°C vs. 125°C) and higher power rating (150 mW vs. 100 mW) provide design margin

Similar Part: 2SC5658M3T5G (onsemi)

The 2SC5658M3T5G does not qualify as a direct substitute due to electrical parameter deviations:

• Collector current rating (100 mA) is insufficient for 500 mA applications
• Collector-emitter breakdown voltage (50 V) exceeds application requirements
• DC current gain (120 @ 1mA, 6V) does not match the specified 270 @ 10mA, 2V
• Saturation voltage (400mV @ 5mA, 60mA) exceeds the 250mV maximum

This component is suitable only for applications with different electrical specifications and lower current requirements.

Frequently Asked Questions (FAQ)

Q: Can the 2SC5663T2L directly replace the 2SC6036G0L in existing designs?

A: Yes. The 2SC5663T2L meets all electrical and mechanical specifications of the 2SC6036G0L. No circuit modifications are required. The component operates within identical voltage, current, and gain parameters and uses the same SOT-723 package.

Q: Why is the 2SC5658M3T5G listed as a similar part rather than a direct substitute?

A: The 2SC5658M3T5G has a maximum collector current of 100 mA, which is insufficient for applications requiring 500 mA. Additionally, its collector-emitter breakdown voltage of 50 V and DC current gain of 120 @ 1mA, 6V do not match the 2SC6036G0L specifications. This component is suitable only for different application requirements.

Q: What is the package compatibility between these transistors?

A: All three transistors use the SOT-723 surface mount package. The 2SC6036G0L uses the SSSMini3-F2 supplier device package, while the 2SC5663T2L uses VMT3, and the 2SC5658M3T5G uses SOT-723. All are mechanically compatible with SOT-723 footprints.

Q: Does the 2SC5663T2L have better performance characteristics than the 2SC6036G0L?

A: The 2SC5663T2L provides equivalent electrical performance with enhanced specifications. It offers a higher transition frequency (320 MHz vs. 200 MHz), higher maximum power dissipation (150 mW vs. 100 mW), and a higher maximum operating temperature (150°C vs. 125°C). These enhancements provide additional design margin without compromising compatibility.

Q: Are there compliance or regulatory differences between the substitute and the original part?

A: The 2SC5663T2L is RoHS3 compliant and REACH unaffected, providing regulatory alignment with current standards. The 2SC6036G0L status does not specify these certifications. Both components have MSL 1 (Unlimited) moisture sensitivity ratings and EAR99 ECCN classification.

Q: What inventory status should be considered when selecting a substitute?

A: The 2SC5663T2L has 7,600 pieces in stock, providing adequate availability for production and maintenance requirements. The 2SC6036G0L, though obsolete, has 90,200 pieces available. The 2SC5658M3T5G has 8,451 pieces in stock but does not meet electrical requirements for direct substitution.