2SC5130 Equivalent & Substitute Parts Reference

Part Overview

The 2SC5130, manufactured by Sanken Electric USA Inc., is a Bipolar NPN transistor rated for 400 V, 5 A, 20 MHz, and 30 W in a TO-220F full pack through-hole package. The part is classified as obsolete, making it necessary to identify equivalent and substitute models that provide compatible electrical and mechanical characteristics for ongoing designs, manufacturing, or repair applications in the transistors, bipolar (BJT) category.

Key Parameters

Parameter	Value
Transistor Type	NPN
Voltage - Collector Emitter Breakdown (Max)	400 V
Current - Collector (Ic) (Max)	5 A
Power - Max	30 W
Frequency - Transition	20 MHz
DC Current Gain (hFE) (Min)	10 @ 1.5A, 4V
Vce Saturation (Max) @ Ib, Ic	500 mV @ 300 mA, 1.5 A
Current - Collector Cutoff (Max)	100 µA (ICBO)
Operating Temperature	150°C (TJ)
Mounting Type	Through Hole
Package / Case	TO-220-3 Full Pack
Supplier Device Package	TO-220F
RoHS Status	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution is strictly determined by compatibility in the following parameters: transistor type (NPN), voltage-rating (collector-emitter breakdown), maximum collector current, maximum power dissipation, transition frequency, DC current gain, maximum Vce saturation, collector cutoff current, operating temperature, and package type (full-pack TO-220). Only components meeting or exceeding these parameters while matching the mechanical package and compliance attributes are considered substitutes in the transistors, bipolar (BJT) category.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Transistor Type	Vce (Max)	Ic (Max)	Power (Max)	hFE (Min) @ Test Conditions	Vce(sat) (Max) @ Ib, Ic	Current - Collector Cutoff (Max)	Frequency - Transition	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package	RoHS Status	Product Status
2SC5130	Sanken Electric USA Inc.	NPN	400 V	5 A	30 W	10 @ 1.5A, 4V	500 mV @ 300mA, 1.5A	100 µA	20 MHz	150°C (TJ)	Through Hole	TO-220-3 Full Pack	TO-220F	RoHS Compliant	Obsolete
BUL1102EFP	STMicroelectronics	NPN	450 V	4 A	30 W	12 @ 2A, 5V	1.5 V @ 400mA, 2A	100 µA	-	150°C (TJ)	Through Hole	TO-220-3 Full Pack	TO-220FP	ROHS3 Compliant	Active
FJPF13007H2TU	onsemi	NPN	400 V	8 A	40 W	26 @ 2A, 5V	3 V @ 2A, 8A	-	4 MHz	150°C (TJ)	Through Hole	TO-220-3 Full Pack	TO-220F-3	ROHS3 Compliant	Active
MJF18004G	onsemi	NPN	450 V	5 A	35 W	14 @ 300mA, 5V	750 mV @ 500mA, 2.5A	100 µA	13 MHz	-65°C ~ 150°C (TJ)	Through Hole	TO-220-3 Full Pack	TO-220FP	ROHS3 Compliant	Active
ST13007DFP	STMicroelectronics	NPN	400 V	8 A	36 W	8 @ 5A, 5V	2 V @ 2A, 8A	100 µA	-	150°C (TJ)	Through Hole	TO-220-3 Full Pack	TO-220FP	ROHS3 Compliant	Obsolete

Engineering Selection Recommendations

When selecting substitute transistors for the 2SC5130, all listed alternatives are RoHS compliant, have the same through-hole TO-220 full pack form factor, and are compliant with Moisture Sensitivity Level (MSL) 1 or Not Applicable designations. Preference is given to active product status for ongoing availability. Obsolete or discontinued parts may only be considered for one-time or non-recurring requirements.

Frequently Asked Questions (FAQ)

Q1: What key parameters determine an acceptable substitute for the 2SC5130 in the bipolar NPN transistor category?
A1: Compatible substitutes must match or exceed voltage (Vce), current (Ic), power dissipation, package type (TO-220 full pack), DC current gain (hFE), Vce(sat), cutoff current, and must have the same mounting type.

Q2: Why is package compatibility important for substitution?
A2: Mechanical fit, heat dissipation, and terminal arrangement are dictated by package type. The TO-220-3 Full Pack and TO-220F designations ensure exact board and heatsink compatibility.

Q3: How does product status like "Active" or "Obsolete" affect engineering selection?
A3: "Active" substitute parts are generally preferred for new designs and volume production due to assured manufacturing continuity. "Obsolete" parts may only be suitable for legacy support.

Q4: Are all substitute parts RoHS compliant?
A4: All listed substitute parts are specified as RoHS or ROHS3 compliant.

Q5: Why is Moisture Sensitivity Level (MSL) provided in the selection criteria?
A5: MSL defines safe handling and storage requirements, affecting reliability but not electrical compatibility. All listed options have unlimited or not applicable (robust) MSL ratings.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message