2SC4467 Equivalent & Substitute Parts Reference

Part Overview

The Sanken Electric USA Inc. 2SC4467 is a Bipolar Junction Transistor (BJT) categorized as an NPN, with a collector-emitter voltage rating of 120 V, collector current rating of 8 A, and a maximum power dissipation of 80 W, provided in a TO-3P through-hole package. This device is RoHS3 compliant and is currently listed as active. Alternate or substitute models are often required to address inventory availability, footprint compatibility, or to meet purchasing specifications within the same performance category.

Substiute Parts

2SC4467

Sanken Electric USA Inc.In Stock: 22662SC4467 Datasheet

Current PartRFQ

TIP35C

NTE Electronics, IncIn Stock: 35314TIP35C Datasheet

SimilarRFQ

TIP35CP

STMicroelectronicsIn Stock: 1707TIP35CP Datasheet

SimilarRFQ

TIP35CW

STMicroelectronicsIn Stock: 1835TIP35CW Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 2SC4467 are determined by matching transistor type (NPN), voltage collector-emitter breakdown (Vce), maximum collector current (Ic), DC current gain (hFE), power dissipation, transition frequency, operating temperature, mounting type, package/case, and RoHS compliance. Only models matching or exceeding these specifications, or those that present identical mechanical footprint where required, are included. The following key parameters are used for grouping: Transistor Type, Vce (Max), Ic (Max), hFE (Min), Power (Max), Operating Temperature, Mounting Type, Package / Case, and RoHS Status.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are active and RoHS3 compliant. Moisture Sensitivity Level and general compliance for environmental certifications have been matched based on the input data. Product status is active with unrestricted availability noted for all substitutes. No further selection restrictions apply based on product lifecycle or compliance categories as provided.

Frequently Asked Questions (FAQ)

Q1: What are the key criteria for substituting the 2SC4467 with TIP35C, TIP35CP, or TIP35CW?
A1: Substitute parts are matched on transistor type (NPN), collector-emitter voltage (Vce), collector current (Ic), DC current gain (hFE), power dissipation, transition frequency, operating temperature, mounting type, package or case, and RoHS compliance.

Q2: Are the packages for these transistors mechanically interchangeable?
A2: The 2SC4467 and TIP35CP share the TO-3P-3, SC-65-3 package. TIP35C uses TO-218-3 and TIP35CW uses TO-247-3. Package compatibility requires verification of PCB footprint and mechanical constraints according to these package types.

Q3: Are there differences in transition frequency and current gain between these options?
A3: The 2SC4467 provides a transition frequency of 20 MHz and hFE (min) of 50 at 3A, 4V. Substitute options provide 3 MHz transition frequency and hFE (min) of 10 at 15A, 4V.

Q4: Are all substitutes RoHS compliant and active status?
A4: All substitutes provided (TIP35C, TIP35CP, TIP35CW) are listed as RoHS3 compliant and have active product status.

Q5: Should operating temperature or other mechanical parameters affect selection?
A5: All parts provided support maximum Tj of 150°C and through-hole mounting; operating temperature and mounting type match the original component within the supplied data.

Q6: Is there a difference in power handling or collector current rating among these parts?
A6: The substitute parts (TIP35C, TIP35CP, TIP35CW) are rated for higher collector current (25 A vs. 8 A) and higher maximum power dissipation (125 W vs. 80 W) compared to 2SC4467.