2SC4117-GR,LF Equivalent & Substitute Parts

Part Overview

The 2SC4117-GR,LF is an NPN bipolar junction transistor manufactured by Toshiba Semiconductor and Storage, designed for general-purpose switching and amplification applications. This surface mount device operates at a maximum collector voltage of 120 V with a collector current rating of 100 mA and a transition frequency of 100 MHz. The part is housed in an SC-70 (SOT-323) package and dissipates a maximum of 100 mW. The 2SC4117-GR,LF maintains Active product status and carries ROHS3 compliance certification. Equivalent substitute parts are identified based on matching electrical specifications and mechanical packaging requirements.

Substiute Parts

2SC4117-GR,LF

Toshiba Semiconductor and StorageIn Stock: 38092SC4117-GR,LF Datasheet

Current PartRFQ

2SC4117-BL,LF

Toshiba Semiconductor and StorageIn Stock: 173612SC4117-BL,LF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 2SC4117-GR,LF are identified through direct parametric equivalence. The substitution logic is based on the following critical parameters that must match exactly:

• Transistor Type: NPN configuration
• Voltage Rating: 120 V collector-emitter breakdown voltage
• Current Rating: 100 mA maximum collector current
• Power Dissipation: 100 mW maximum
• Frequency Response: 100 MHz transition frequency
• DC Current Gain: 200 minimum at specified conditions
• Saturation Characteristics: 300mV maximum at specified bias conditions
• Package: SC-70 (SOT-323) surface mount
• Compliance: ROHS3 compliant

Parts meeting all these electrical and mechanical specifications are classified as parametric equivalents and direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

The 2SC4117-BL,LF is a direct parametric equivalent to the 2SC4117-GR,LF. Both parts are manufactured by Toshiba Semiconductor and Storage and share identical electrical specifications and mechanical packaging. Both devices maintain Active product status and carry ROHS3 compliance certification. The parts are interchangeable in applications requiring NPN transistors with 120 V breakdown voltage, 100 mA collector current, and 100 MHz transition frequency in SC-70 surface mount packages. Selection between these parts may be based on inventory availability or supply chain considerations, as no electrical or mechanical differentiation exists between them.

Frequently Asked Questions (FAQ)

Q: Can the 2SC4117-BL,LF replace the 2SC4117-GR,LF in existing designs?

A: Yes. The 2SC4117-BL,LF is a direct parametric equivalent with identical electrical specifications, DC current gain characteristics, saturation voltage, and package configuration. No circuit modifications are required.

Q: Are there any differences in the SC-70 package between these parts?

A: No. Both parts use the SC-70 (SOT-323) surface mount package with identical pin configuration and mechanical dimensions. PCB layout and footprints are interchangeable.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the 2SC4117-GR,LF and 2SC4117-BL,LF are ROHS3 compliant and REACH unaffected. Both carry Moisture Sensitivity Level 1 (Unlimited) classification.

Q: What is the difference between the -GR and -BL designations?

A: The -GR and -BL suffixes represent different tape and reel packaging configurations or manufacturing lot codes from Toshiba. The electrical and mechanical specifications are identical.

Q: Can these parts be used interchangeably in high-frequency switching applications?

A: Yes. Both parts feature 100 MHz transition frequency and identical saturation characteristics, supporting interchangeable use in switching applications within the specified frequency range.

Q: Are there any thermal considerations when substituting between these parts?

A: No. Both parts share identical maximum operating temperature ratings of 125°C (TJ) and 100 mW power dissipation limits. Thermal management requirements remain unchanged.