Equivalent & Substitute Parts for 2SB0710AQL

Part Overview

The 2SB0710AQL is a PNP bipolar junction transistor manufactured by Panasonic Electronic Components, designed for small-signal switching and amplification applications. This device features a maximum collector current of 500 mA, collector-emitter breakdown voltage of 50 V, and a transition frequency of 200 MHz. The part is housed in a TO-236-3 (SOT-23-3) surface mount package with a maximum power dissipation of 200 mW.

The 2SB0710AQL is classified as obsolete. Equivalent and substitute parts are necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements. Substitute devices must maintain electrical compatibility within the specified parameter ranges while accommodating minor variations in performance characteristics.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Current - Collector (Ic) (Max)	500	mA
Voltage - Collector Emitter Breakdown (Max)	50	V
Vce Saturation (Max) @ Ib, Ic	600mV @ 30mA, 300mA	—
Current - Collector Cutoff (Max)	100	nA
DC Current Gain (hFE) (Min) @ Ic, Vce	85 @ 150mA, 10V	—
Power - Max	200	mW
Frequency - Transition	200	MHz
Operating Temperature (TJ)	150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the 2SB0710AQL is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Transistor type must be PNP
Collector-emitter breakdown voltage must be greater than or equal to 50 V
Maximum collector current must be greater than or equal to 500 mA
Transition frequency must be greater than or equal to 200 MHz
Package type must be TO-236-3, SC-59, or SOT-23-3 (surface mount)
Operating temperature range must support 150°C maximum junction temperature
Moisture sensitivity level must be 1 (Unlimited) or equivalent

Secondary Compatibility Parameters:

Vce saturation characteristics
DC current gain (hFE) minimum specifications
Collector cutoff current (ICBO)
Power dissipation capability

Substitute parts are grouped into two categories: direct electrical equivalents that meet or exceed all primary criteria, and functional alternatives that maintain electrical compatibility within specified operating ranges while accommodating minor performance variations.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce(br) V	Vce Sat (Max) mV	hFE (Min)	fT MHz	P (Max) mW	Package	Status
2SB0710AQL	Panasonic	500	50	600	85	200	200	SOT-23-3	Obsolete
BCX17T116	Rohm Semiconductor	500	45	620	100	200	425	SOT-23-3	Active
2PB710ARL,215	Nexperia USA Inc.	500	50	600	120	120	250	SOT-23-3	Active
2PB710ASL,215	Nexperia USA Inc.	500	50	600	170	140	250	SOT-23-3	Active
2SA1313-Y,LF	Toshiba Semiconductor and Storage	500	50	250	120	200	200	SOT-23-3	Active
2SA812-M7-TP	Micro Commercial Co	100	50	300	90	180	200	SOT-23-3	Active
50A02CH-TL-E	onsemi	500	50	120	200	690	700	SOT-23-3	Active
BC807-16-TP	Micro Commercial Co	500	45	700	100	100	300	SOT-23-3	Active

Engineering Selection Recommendations

Full Electrical Equivalents (500 mA, 50 V Rating):

The 2PB710ARL,215 and 2PB710ASL,215 from Nexperia USA Inc. provide the closest electrical match to the 2SB0710AQL. Both devices maintain the 500 mA collector current rating, 50 V breakdown voltage, and identical Vce saturation characteristics at the specified bias points. These parts carry AEC-Q101 automotive qualification and ROHS3 compliance, ensuring long-term availability and regulatory adherence. The 2PB710ASL,215 offers superior DC current gain (170 vs. 85 minimum), providing enhanced amplification capability in switching applications.

The 2SA1313-Y,LF from Toshiba Semiconductor and Storage meets all primary electrical criteria with 500 mA maximum collector current and 50 V breakdown voltage. This device features improved Vce saturation characteristics (250 mV maximum) compared to the original part, resulting in lower power dissipation during saturation. ROHS3 compliance and active product status support continued supply availability.

High-Performance Alternative (Enhanced Frequency Response):

The 50A02CH-TL-E from onsemi provides superior frequency performance with a transition frequency of 690 MHz, compared to the 200 MHz specification of the 2SB0710AQL. This device maintains 500 mA collector current and 50 V breakdown voltage ratings. The enhanced power dissipation capability (700 mW) and improved Vce saturation characteristics (120 mV) make this part suitable for high-frequency switching applications. ROHS3 compliance and active status ensure supply continuity.

Reduced Current Alternative (100 mA Rating):

The 2SA812-M7-TP from Micro Commercial Co is suitable for applications where collector current requirements do not exceed 100 mA. This device maintains 50 V breakdown voltage and 200 mW power dissipation. The extended operating temperature range (-55°C to 150°C) provides additional thermal margin. This part is appropriate for low-current signal switching and amplification circuits.

Voltage-Reduced Alternatives (45 V Rating):

The BCX17T116 from Rohm Semiconductor and BC807-16-TP from Micro Commercial Co both feature 45 V collector-emitter breakdown voltage, which is 5 V lower than the 2SB0710AQL specification. These parts maintain 500 mA maximum collector current and are suitable for applications where the 50 V rating is not required. The BCX17T116 offers enhanced power dissipation (425 mW) and improved DC current gain (100 minimum). Both devices carry ROHS3 compliance.

Frequently Asked Questions (FAQ)

Q: Can the BCX17T116 be used as a direct replacement for the 2SB0710AQL?

A: The BCX17T116 is electrically compatible for most applications. The primary difference is the collector-emitter breakdown voltage rating of 45 V versus 50 V on the original part. If the circuit design includes voltage margins that accommodate the 45 V specification, this substitution is acceptable. Both devices share identical 500 mA collector current rating, SOT-23-3 package, and 200 MHz transition frequency.

Q: What is the advantage of using the 50A02CH-TL-E over the 2SB0710AQL?

A: The 50A02CH-TL-E provides three significant advantages: transition frequency of 690 MHz versus 200 MHz, enabling higher-frequency switching applications; Vce saturation of 120 mV versus 600 mV, reducing power dissipation during saturation; and maximum power dissipation of 700 mW versus 200 mW, supporting higher-power applications. All other electrical parameters remain compatible.

Q: Why is the 2SA812-M7-TP listed as a substitute if it has only 100 mA maximum collector current?

A: The 2SA812-M7-TP is listed as a functional alternative for applications where the collector current requirement does not exceed 100 mA. It maintains the 50 V breakdown voltage, SOT-23-3 package, and 200 mW power dissipation of the original part. This substitution is appropriate for low-current signal processing circuits but not for applications requiring the full 500 mA capability.

Q: Are all substitute parts available in the same package as the 2SB0710AQL?

A: Yes. All listed substitute parts use the TO-236-3, SC-59, or SOT-23-3 surface mount package designation. These package designations are equivalent and interchangeable for PCB layout purposes. Supplier device package names may vary (Mini3-G1, SST3, TO-236AB, S-Mini, SOT-23, 3-CPH), but all parts are compatible with standard SOT-23-3 footprints.

Q: What compliance certifications should I verify when selecting a substitute?

A: For automotive applications, verify AEC-Q101 qualification status. For general industrial applications, confirm ROHS3 compliance and REACH unaffected status. The 2PB710ARL,215 and 2PB710ASL,215 carry AEC-Q101 qualification. The 50A02CH-TL-E, BCX17T116, 2SA1313-Y,LF, and BC807-16-TP all carry ROHS3 compliance. Moisture sensitivity level 1 (Unlimited) is maintained across all substitutes.

Q: Can I use the 2PB709BRL,215 or 2PB709BSL,215 as substitutes?

A: The 2PB709BRL,215 and 2PB709BSL,215 are not recommended as direct substitutes. These devices have a maximum collector current rating of 200 mA, which is insufficient for applications requiring the full 500 mA capability of the 2SB0710AQL. These parts are suitable only for applications where collector current does not exceed 200 mA.

Q: What is the difference between the 2PB710ARL,215 and 2PB710ASL,215?

A: Both devices maintain identical electrical ratings for collector current (500 mA), breakdown voltage (50 V), and Vce saturation characteristics. The primary difference is DC current gain: the 2PB710ARL,215 specifies 120 minimum at 150 mA and 10 V, while the 2PB710ASL,215 specifies 170 minimum at the same bias point. The 2PB710ASL,215 also features a higher transition frequency (140 MHz versus 120 MHz). Both carry AEC-Q101 qualification and ROHS3 compliance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message