2SA2205-TL-E Equivalent & Substitute Parts

Part Overview

The 2SA2205-TL-E is a Surface Mount PNP Bipolar Junction Transistor manufactured by onsemi, rated for 100V collector-emitter breakdown voltage and 2A maximum collector current. This component is classified as Obsolete product status. Due to obsolescence, identifying functionally equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and repair applications.

Key Parameters

Parameter	Value
Transistor Type	PNP
Current - Collector (Ic) (Max)	2 A
Voltage - Collector Emitter Breakdown (Max)	100 V
Power - Max	800 mW
Frequency - Transition	300 MHz
DC Current Gain (hFE) (Min) @ Ic, Vce	200 @ 100mA, 5V
Package / Case	TO-252-3, DPAK (2 Leads + Tab), SC-63
Mounting Type	Surface Mount
Operating Temperature (TJ)	150°C
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the 2SA2205-TL-E is determined by strict equivalence across the following critical electrical and mechanical parameters:

Electrical Equivalence Criteria:

Transistor Type: PNP configuration
Maximum Collector Current (Ic): 2 A minimum
Collector-Emitter Breakdown Voltage (VCEO): 100 V minimum
DC Current Gain (hFE): 200 minimum at specified bias conditions
Package compatibility: TO-252-3 DPAK surface mount form factor

Mechanical Compatibility:

Surface Mount packaging in TO-252-3 DPAK configuration
Pin configuration: 2 Leads + Tab (SC-63)

The 2SA1593T-TL-E meets all substitution criteria as a manufacturer-recommended equivalent. Both parts share identical maximum collector current (2 A), collector-emitter breakdown voltage (100 V), DC current gain specification (200 @ 100mA, 5V), package type (TO-252-3 DPAK), and mounting technology (Surface Mount).

Parameter Comparison

Parameter	2SA2205-TL-E	2SA1593T-TL-E	Compatibility
Transistor Type	PNP	PNP	Equivalent
Current - Collector (Ic) (Max)	2 A	2 A	Equivalent
Voltage - Collector Emitter Breakdown (Max)	100 V	100 V	Equivalent
Vce Saturation (Max) @ Ib, Ic	240mV @ 100mA, 1A	600mV @ 100mA, 1A	Substitute Higher
Current - Collector Cutoff (Max)	1µA (ICBO)	100nA (ICBO)	Substitute Lower
DC Current Gain (hFE) (Min) @ Ic, Vce	200 @ 100mA, 5V	200 @ 100mA, 5V	Equivalent
Power - Max	800 mW	1 W	Substitute Higher
Frequency - Transition	300 MHz	120 MHz	Substitute Lower
Operating Temperature (TJ)	150°C	150°C	Equivalent
Package / Case	TO-252-3, DPAK (2 Leads + Tab), SC-63	TO-252-3, DPAK (2 Leads + Tab), SC-63	Equivalent
Mounting Type	Surface Mount	Surface Mount	Equivalent
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Equivalent

Engineering Selection Recommendations

The 2SA1593T-TL-E is the manufacturer-recommended substitute for the obsolete 2SA2205-TL-E. Both components are classified as Obsolete and maintain ROHS3 compliance and REACH unaffected status.

Selection Basis:

The 2SA1593T-TL-E provides functional substitution with the following characteristics:

Identical maximum collector current (2 A) and collector-emitter breakdown voltage (100 V) ensure direct electrical compatibility in circuit applications
Matching DC current gain specification (200 @ 100mA, 5V) maintains amplification characteristics
Identical package type (TO-252-3 DPAK) and surface mount configuration enable direct PCB layout compatibility without redesign
Higher maximum power dissipation (1 W versus 800 mW) provides enhanced thermal margin
Lower transition frequency (120 MHz versus 300 MHz) is suitable for applications not requiring high-frequency operation

The substitute part exhibits higher saturation voltage (600mV versus 240mV) and lower collector cutoff current (100nA versus 1µA), which may affect circuit performance in applications with stringent saturation or leakage specifications. Circuit validation is required for applications sensitive to these parameters.

Frequently Asked Questions (FAQ)

Q: Can the 2SA1593T-TL-E directly replace the 2SA2205-TL-E without PCB modification?

A: Yes. Both components use identical TO-252-3 DPAK surface mount packaging with matching pin configuration (2 Leads + Tab, SC-63). No PCB layout changes are required for physical substitution.

Q: What are the key electrical differences between these parts?

A: The primary differences are transition frequency (300 MHz for 2SA2205-TL-E versus 120 MHz for 2SA1593T-TL-E), saturation voltage (240mV versus 600mV at specified bias), and maximum power dissipation (800 mW versus 1 W). Maximum collector current, breakdown voltage, and DC current gain are identical.

Q: Are both parts compliant with current environmental regulations?

A: Yes. Both the 2SA2205-TL-E and 2SA1593T-TL-E are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Which part should be selected for high-frequency switching applications?

A: The 2SA2205-TL-E, with its 300 MHz transition frequency, is specified for higher-frequency operation. The 2SA1593T-TL-E, rated at 120 MHz, is suitable for lower-frequency applications.

Q: What is the moisture sensitivity level for both parts?

A: Both components have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.

Q: Are there packaging format differences between these parts?

A: The 2SA2205-TL-E is supplied in standard packaging, while the 2SA1593T-TL-E is available in Cut Tape (CT) format. Both use identical component packaging (TO-252-3 DPAK).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message