Equivalent & Substitute Parts for 2PD601ASL,215 NPN Bipolar Transistor

Part Overview

The 2PD601ASL,215 is an NPN bipolar junction transistor manufactured by Nexperia USA Inc., designed for small-signal switching and amplification applications. This surface-mount device operates at 50 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and 250 mW power dissipation. The part is classified as Active product status with AEC-Q101 automotive qualification and ROHS3 compliance. Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and application-specific performance requirements where electrical and mechanical parameters align within acceptable tolerances.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN	—
Voltage - Collector Emitter Breakdown (Max)	50	V
Current - Collector (Ic) (Max)	100	mA
Power - Max	250	mW
Frequency - Transition	100	MHz
DC Current Gain (hFE) (Min) @ Ic, Vce	290 @ 2mA, 10V	—
Vce Saturation (Max) @ Ib, Ic	250mV @ 10mA, 100mA	—
Current - Collector Cutoff (Max)	10	nA
Operating Temperature (TJ)	150	°C
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Mounting Type	Surface Mount	—
Grade	Automotive	—
Qualification	AEC-Q101	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the 2PD601ASL,215 is determined by strict alignment of electrical and mechanical parameters. The primary substitution criteria are:

Electrical Parameters:

Voltage - Collector Emitter Breakdown: minimum 50 V
Current - Collector (Ic) (Max): minimum 100 mA
Power - Max: minimum 250 mW
Frequency - Transition: minimum 100 MHz
DC Current Gain (hFE): minimum 290 @ 2mA, 10V
Vce Saturation: maximum 250mV @ 10mA, 100mA
Current - Collector Cutoff: maximum 10 nA

Mechanical Parameters:

Package / Case: TO-236-3, SC-59, SOT-23-3
Mounting Type: Surface Mount
Operating Temperature: 150°C (TJ)

Compliance Parameters:

Grade: Automotive
Qualification: AEC-Q101
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level: 1 (Unlimited)

Substitute parts are grouped into two categories:

Category 1: Parametric Equivalents — Parts with identical or superior electrical specifications and matching mechanical/compliance requirements.

Category 2: Similar Parts — Parts with electrical specifications that meet or exceed the main part requirements but may have different package configurations, manufacturers, or enhanced performance characteristics.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce(br) V	Power mW	fT MHz	hFE @ 2mA, 10V	Vce Sat mV	Package	Grade	AEC-Q101
2PD601ASL,215	Nexperia USA Inc.	100	50	250	100	290	250	TO-236AB	Automotive	Yes
2PD601ASL,235	Nexperia USA Inc.	100	50	250	100	290	250	TO-236AB	Automotive	Yes
2PD601BSL,215	NXP Semiconductors	200	50	250	250	290	250	TO-236AB	Automotive	Yes
2SC3325-Y,LF	Toshiba Semiconductor and Storage	500	50	200	300	120	250	S-Mini	—	—
50C02CH-TL-E	onsemi	500	50	700	500	300	100	3-CPH	—	—
BC817-40LT1G	onsemi	500	45	300	100	250	700	SOT-23-3	—	—
BC847A RFG	Taiwan Semiconductor Corporation	100	45	200	100	110	500	SOT-23	—	—
BC847A-7-F	Diodes Incorporated	100	45	300	300	110	600	SOT-23-3	—	—
BC847B RFG	Taiwan Semiconductor Corporation	100	45	200	100	200	500	SOT-23	—	—
BC847C RFG	Taiwan Semiconductor Corporation	100	45	200	100	420	500	SOT-23	—	—
BC847C-TP	Micro Commercial Co	100	45	225	100	420	500	SOT-23	—	—

Engineering Selection Recommendations

Tier 1: Direct Parametric Equivalents

The 2PD601ASL,235 is a direct parametric equivalent to the 2PD601ASL,215. Both parts are manufactured by Nexperia USA Inc., share identical electrical specifications, package configuration (TO-236AB), automotive grade classification, and AEC-Q101 qualification. The only difference is the tape reel designation suffix. This part is suitable for direct substitution without circuit redesign.

Tier 2: Enhanced Performance Substitutes with Matching Compliance

The 2PD601BSL,215 is manufactured by NXP Semiconductors and exceeds the main part specifications in collector current (200 mA vs. 100 mA) and transition frequency (250 MHz vs. 100 MHz) while maintaining the same voltage rating, power dissipation, and package format. It retains automotive grade and AEC-Q101 qualification. This part is suitable for applications requiring higher current handling or faster switching performance within the same form factor.

Tier 3: Similar Parts with Reduced Compliance Certification

The BC847 series (BC847A RFG, BC847A-7-F, BC847B RFG, BC847C RFG, BC847C-TP) and onsemi BC817-40LT1G are NPN small-signal transistors in SOT-23-3 package with collector current ratings of 100 mA to 500 mA. These parts do not carry automotive grade or AEC-Q101 qualification. The BC847 variants have reduced collector-emitter breakdown voltage (45 V vs. 50 V) and higher saturation voltage (500–600 mV vs. 250 mV). These parts are suitable for non-automotive applications or where compliance requirements are less stringent.

Tier 4: Higher Current Capacity Alternatives

The 2SC3325-Y,LF (Toshiba) and 50C02CH-TL-E (onsemi) are designed for higher collector current applications (500 mA). The 50C02CH-TL-E offers superior power dissipation (700 mW) and transition frequency (500 MHz). These parts lack automotive qualification and are suitable for general-purpose switching applications requiring higher current capacity.

Frequently Asked Questions (FAQ)

Q1: Can I use 2PD601ASL,235 as a direct replacement for 2PD601ASL,215?

Yes. Both parts are manufactured by Nexperia USA Inc. with identical electrical specifications, package configuration (TO-236AB), and compliance certifications (Automotive grade, AEC-Q101, ROHS3). The suffix difference reflects only tape reel designation. Direct substitution is supported without circuit modification.

Q2: What is the difference between 2PD601ASL,215 and 2PD601BSL,215?

The 2PD601BSL,215 has higher collector current capacity (200 mA vs. 100 mA) and faster transition frequency (250 MHz vs. 100 MHz). Both maintain 50 V breakdown voltage and 250 mW power rating. The 2PD601BSL,215 is suitable for applications requiring higher current or faster switching while maintaining the same package and compliance level.

Q3: Are BC847 series transistors suitable replacements for automotive applications?

No. BC847 series transistors (BC847A RFG, BC847B RFG, BC847C RFG, BC847A-7-F, BC847C-TP) do not carry automotive grade classification or AEC-Q101 qualification. Additionally, they have reduced collector-emitter breakdown voltage (45 V vs. 50 V) and higher saturation voltage. These parts are suitable only for non-automotive or general-purpose applications.

Q4: What is the significance of the TO-236AB package designation?

TO-236AB is the supplier device package designation for the 2PD601ASL,215 and 2PD601BSL,215. It is equivalent to SOT-23-3 and SC-59 package designations. All three designations refer to the same three-lead surface-mount package. Parts specified with TO-236AB, SOT-23-3, or SC-59 are mechanically compatible.

Q5: Can I use higher current-rated transistors like 2SC3325-Y,LF or 50C02CH-TL-E as substitutes?

Higher current-rated transistors can be used in applications where the circuit design permits. However, these parts lack automotive qualification and AEC-Q101 certification. The 2SC3325-Y,LF has lower power dissipation (200 mW vs. 250 mW) and different DC current gain characteristics. The 50C02CH-TL-E has superior performance but uses a different package (3-CPH). Substitution requires circuit validation.

Q6: What does AEC-Q101 qualification mean?

AEC-Q101 is an automotive industry standard qualification for discrete semiconductors. It certifies that the component meets reliability, performance, and environmental stress testing requirements for automotive applications. Only 2PD601ASL,215, 2PD601ASL,235, and 2PD601BSL,215 carry this certification among the listed parts.

Q7: Are all listed substitute parts ROHS3 compliant?

Yes. All parts listed in the substitute parts list are ROHS3 compliant, indicating compliance with the Restriction of Hazardous Substances Directive. This ensures lead-free and environmentally compliant manufacturing.

Q8: What is the Moisture Sensitivity Level (MSL) and why does it matter?

MSL indicates the maximum time a component can be exposed to ambient conditions (30°C, 85% relative humidity) before soldering. MSL 1 (Unlimited) means the component has no moisture sensitivity restrictions and can be stored indefinitely without special drying procedures. All listed parts have MSL 1 rating.

Q9: Can I substitute BC817-40LT1G for 2PD601ASL,215 in a 50 V application?

No. The BC817-40LT1G has a maximum collector-emitter breakdown voltage of 45 V, which is below the 50 V requirement. Additionally, it has higher saturation voltage (700 mV vs. 250 mV) and lacks automotive qualification. This part is unsuitable for applications requiring 50 V operation.

Q10: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® refer to supply formats for surface-mount components. TR indicates continuous reel packaging for high-volume automated assembly. CT & Digi-Reel® indicates cut tape format suitable for lower-volume or mixed-component assembly. Both formats contain identical components; the difference is in packaging and handling for manufacturing processes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message