Equivalent & Substitute Parts for 2PD601ART,215 NPN Bipolar Transistor

Part Overview

The 2PD601ART,215 is an NPN bipolar junction transistor manufactured by Nexperia USA Inc., designed for general-purpose switching and amplification applications. This surface mount device operates at 50 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and 250 mW power dissipation. The part is AEC-Q101 qualified for automotive applications and maintains Active product status with 10,200 units in current inventory.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter ranges while maintaining compatible packaging and compliance certifications. Alternative devices may be required due to supply constraints, manufacturing discontinuation, or design optimization for specific application requirements.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN	—
Voltage - Collector Emitter Breakdown (Max)	50	V
Current - Collector (Ic) (Max)	100	mA
Power - Max	250	mW
Frequency - Transition	100	MHz
DC Current Gain (hFE) (Min) @ Ic, Vce	210 @ 2mA, 10V	—
Vce Saturation (Max) @ Ib, Ic	250mV @ 10mA, 100mA	—
Current - Collector Cutoff (Max)	100	nA
Operating Temperature (TJ)	150	°C
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Mounting Type	Surface Mount	—
Grade	Automotive	—
Qualification	AEC-Q101	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Transistor Type: NPN (mandatory match)
Voltage - Collector Emitter Breakdown (Max): ≥ 50 V
Current - Collector (Ic) (Max): ≥ 100 mA
Power - Max: ≥ 250 mW
Package / Case: TO-236-3, SC-59, or SOT-23-3 (mechanical compatibility)
Mounting Type: Surface Mount (mandatory match)

Secondary Compatibility Factors:

DC Current Gain (hFE) (Min): ≥ 210 @ specified conditions
Frequency - Transition: ≥ 100 MHz
Operating Temperature: ≥ 150°C (TJ)
RoHS Status: ROHS3 Compliant (mandatory match)
Moisture Sensitivity Level: 1 (Unlimited)

Compliance Requirements:

Grade: Automotive preferred; industrial-grade alternatives acceptable if all electrical parameters are met
Qualification: AEC-Q101 preferred for automotive applications

Substitute parts are grouped into two categories:

Category 1 - Direct Equivalents (Identical Base Product Number): Parts sharing the 2PD601 base product number with identical electrical specifications and automotive qualification.

Category 2 - Functional Equivalents (Alternative Base Product Numbers): Parts from different manufacturers meeting or exceeding all primary substitution criteria, with compatible packaging and compliance status.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce(br) V	Power mW	fT MHz	hFE (Min)	Package	Grade	Status
2PD601ART,215	Nexperia USA Inc.	100	50	250	100	210	TO-236AB	Automotive	Active
2PD601ARL,215	Nexperia USA Inc.	100	50	250	100	210	TO-236AB	Automotive	Active
2PD601BRL,215	Nexperia USA Inc.	200	50	250	250	210	TO-236AB	Automotive	Active
BC817-40LT1G	onsemi	500	45	300	100	250	SOT-23-3	Industrial	Active
BC847A RFG	Taiwan Semiconductor Corporation	100	45	200	100	110	SOT-23	Industrial	Active
BC847A-7-F	Diodes Incorporated	100	45	300	300	110	SOT-23-3	Industrial	Active
BC847B RFG	Taiwan Semiconductor Corporation	100	45	200	100	200	SOT-23	Industrial	Active
BC847C RFG	Taiwan Semiconductor Corporation	100	45	200	100	420	SOT-23	Industrial	Active
BC847C-13-F	Diodes Incorporated	100	45	310	300	200	SOT-23-3	Industrial	Active
BC847CE6433HTMA1	Infineon Technologies	100	45	330	250	420	SOT-23-3	Industrial	Last Time Buy

Engineering Selection Recommendations

Direct Equivalent Selection:

The 2PD601ARL,215 from Nexperia USA Inc. is a direct equivalent to the 2PD601ART,215, differing only in packaging format (Tape & Reel vs. Tape & Reel designation). Both devices maintain identical electrical specifications, automotive grade qualification, and AEC-Q101 certification. This part is preferred when supply of the primary part number is constrained, with 30,400 units currently in inventory.

The 2PD601BRL,215 provides enhanced performance with doubled collector current capability (200 mA vs. 100 mA) and increased transition frequency (250 MHz vs. 100 MHz), while maintaining the same 50 V breakdown voltage and automotive qualification. This part is suitable for applications requiring higher current handling or faster switching performance within the same voltage class.

Functional Equivalent Selection:

BC847-series transistors from multiple manufacturers (Taiwan Semiconductor Corporation, Diodes Incorporated, Infineon Technologies) meet the core electrical requirements of NPN operation, 100 mA collector current, and SOT-23-3 packaging. However, these devices operate at 45 V collector-emitter breakdown voltage, which is 5 V lower than the primary part. Selection of BC847-series alternatives is appropriate only when circuit design margins accommodate the reduced voltage rating.

The BC817-40LT1G from onsemi provides significantly higher collector current capability (500 mA) and power dissipation (300 mW), making it suitable for applications requiring higher current handling. The 45 V breakdown voltage limitation applies to this device as well.

Compliance Considerations:

All listed substitute parts maintain ROHS3 compliance and Moisture Sensitivity Level 1 (Unlimited). The primary part and 2PD601 series variants carry automotive grade designation with AEC-Q101 qualification. BC847-series alternatives are industrial-grade devices without automotive qualification; their use in automotive applications requires design review and qualification assessment.

The BC847CE6433HTMA1 from Infineon Technologies carries Last Time Buy status, indicating discontinued production. This part should not be selected for new designs or long-term production requirements.

Frequently Asked Questions (FAQ)

Q: Can the 2PD601ARL,215 be used as a direct replacement for 2PD601ART,215?

A: Yes. Both parts are manufactured by Nexperia USA Inc. with identical electrical specifications, automotive grade, and AEC-Q101 qualification. The difference is packaging format designation. Mechanical compatibility and electrical performance are equivalent.

Q: What is the primary limitation when substituting BC847-series transistors for the 2PD601ART,215?

A: The BC847-series devices operate at 45 V collector-emitter breakdown voltage compared to 50 V for the 2PD601ART,215. Applications designed for 50 V operation must verify that circuit margins accommodate this 5 V reduction. Additionally, BC847-series parts are industrial-grade without automotive qualification.

Q: Is the 2PD601BRL,215 a suitable substitute for the 2PD601ART,215?

A: The 2PD601BRL,215 exceeds the electrical requirements of the primary part with doubled collector current (200 mA vs. 100 mA) and higher transition frequency (250 MHz vs. 100 MHz). It maintains the same 50 V breakdown voltage and automotive qualification. This part is suitable when higher performance is acceptable or required by the application.

Q: Can BC847-series transistors be used in automotive applications?

A: BC847-series transistors are industrial-grade devices without automotive qualification. Their use in automotive applications requires design review, qualification testing, and approval per applicable automotive standards. The primary part 2PD601ART,215 carries AEC-Q101 qualification and is recommended for automotive designs.

Q: What is the difference between BC847A, BC847B, and BC847C variants?

A: These variants differ in DC current gain (hFE) specifications. BC847A has minimum hFE of 110, BC847B has minimum hFE of 200, and BC847C has minimum hFE of 420, all measured at 2 mA collector current and 5 V collector-emitter voltage. All three variants maintain identical voltage and current ratings.

Q: Are all substitute parts available in the same package as the 2PD601ART,215?

A: The 2PD601ART,215 is supplied in TO-236AB packaging. Direct equivalents (2PD601ARL,215 and 2PD601BRL,215) use identical packaging. BC847-series alternatives are available in SOT-23-3 (TO-236-3) packaging, which is mechanically compatible with TO-236AB for surface mount applications.

Q: What inventory levels are available for substitute parts?

A: Current inventory levels are: 2PD601ARL,215 (30,400 units), 2PD601BRL,215 (10,999 units), BC817-40LT1G (305,000 units), BC847A RFG (9,851 units), BC847A-7-F (6,100 units), BC847B RFG (20,779 units), BC847C RFG (9,818 units), BC847C-13-F (100,400 units), and BC847CE6433HTMA1 (1,026 units).

Q: Should the BC847CE6433HTMA1 be selected for new designs?

A: No. This part carries Last Time Buy status, indicating discontinued production. New designs should select from Active status parts: 2PD601ARL,215, 2PD601BRL,215, or BC847-series alternatives from Diodes Incorporated or Taiwan Semiconductor Corporation.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message