2PB709ASL,215 Equivalent & Substitute Parts

Part Overview

The 2PB709ASL,215 is an automotive-grade PNP bipolar junction transistor manufactured by Nexperia USA Inc. in SOT-23-3 (TO-236AB) surface mount packaging. This device operates at 45 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and 250 mW power dissipation. The transistor is qualified to AEC-Q101 automotive standards and carries Active product status with ROHS3 compliance.

Equivalent and substitute parts are identified when design requirements permit higher current ratings, different gain specifications, or alternative packaging formats while maintaining core electrical compatibility within the 45 V breakdown voltage class and surface mount form factor.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Voltage - Collector Emitter Breakdown (Max)	45	V
Current - Collector (Ic) (Max)	100	mA
Power - Max	250	mW
Frequency - Transition	80	MHz
DC Current Gain (hFE) (Min) @ Ic, Vce	290 @ 2mA, 10V	—
Vce Saturation (Max) @ Ib, Ic	500mV @ 10mA, 100mA	—
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Mounting Type	Surface Mount	—
Grade	Automotive	—
Qualification	AEC-Q101	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitute parts for the 2PB709ASL,215 are classified into two categories based on electrical and mechanical compatibility:

Parametric Equivalent (Direct Replacement): Parts that maintain identical electrical specifications across all critical parameters including collector current (100 mA), breakdown voltage (45 V), power dissipation (250 mW), transition frequency (80 MHz), and DC current gain (290 @ 2mA, 10V). These parts differ only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) and are sourced from the same manufacturer.

Similar Parts (Higher Current Rating): Parts that exceed the collector current specification (500 mA versus 100 mA) while maintaining the 45 V breakdown voltage class, SOT-23-3 surface mount package, and automotive-grade compliance. These parts operate at higher transition frequencies (100 MHz versus 80 MHz) and possess different DC current gain specifications. Similar parts are suitable for applications where the 2PB709ASL,215 current rating is insufficient but the 45 V voltage class and surface mount form factor are required.

Key Parameters Determining Substitution:

Transistor Type: PNP (mandatory match)
Voltage - Collector Emitter Breakdown: 45 V (mandatory match)
Package / Case: SOT-23-3 or TO-236-3 (mandatory match for surface mount compatibility)
Mounting Type: Surface Mount (mandatory match)
RoHS Status: ROHS3 Compliant (mandatory match)

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce Breakdown (Max) V	Power (Max) mW	Frequency (Transition) MHz	hFE (Min) @ Ic, Vce	Package	Packaging Format	Product Status
2PB709ASL,215	Nexperia USA Inc.	100	45	250	80	290 @ 2mA, 10V	SOT-23-3	Tape & Reel (TR)	Active
2PB709ASL-QVL	Nexperia USA Inc.	100	45	250	80	290 @ 2mA, 10V	SOT-23-3	Cut Tape (CT) & Digi-Reel®	Active
BC807-16-7-F	Diodes Incorporated	500	45	310	100	100 @ 100mA, 1V	SOT-23-3	Tape & Reel (TR)	Active
BC807-16-TP	Micro Commercial Co	500	45	300	100	100 @ 100mA, 1V	SOT-23-3	Tape & Reel (TR)	Active
BC807-16LT1G	onsemi	500	45	300	100	100 @ 100mA, 1V	SOT-23-3	Cut Tape (CT) & Digi-Reel®	Active
BC807-16LT3G	onsemi	500	45	300	100	100 @ 100mA, 1V	SOT-23-3	Tape & Reel (TR)	Active
BC807-25-7-F	Diodes Incorporated	500	45	310	100	160 @ 100mA, 1V	SOT-23-3	Cut Tape (CT) & Digi-Reel®	Active
BC807-25-TP	Micro Commercial Co	500	45	300	100	160 @ 100mA, 1V	SOT-23-3	Tape & Reel (TR)	Active
BC807-25LT1G	onsemi	500	45	300	100	160 @ 100mA, 1V	SOT-23-3	Cut Tape (CT) & Digi-Reel®	Active
BC807-25LT3G	onsemi	500	45	300	100	160 @ 100mA, 1V	SOT-23-3	Cut Tape (CT) & Digi-Reel®	Active
BC807-40-7-F	Diodes Incorporated	500	45	310	100	250 @ 100mA, 1V	SOT-23-3	Cut Tape (CT) & Digi-Reel®	Active

Engineering Selection Recommendations

For Direct Replacement (Identical Electrical Performance):

The 2PB709ASL-QVL from Nexperia USA Inc. provides parametric equivalence to the 2PB709ASL,215 with identical electrical specifications. The only difference is packaging format: 2PB709ASL-QVL is supplied in Cut Tape & Digi-Reel® format while the main part is supplied in Tape & Reel format. Both parts maintain Active product status, AEC-Q101 automotive qualification, and ROHS3 compliance. Selection between these two parts depends solely on procurement and assembly line compatibility with available tape formats.

For Higher Current Applications (Similar Parts):

The BC807 series from Diodes Incorporated, Micro Commercial Co, and onsemi provides 500 mA collector current capability while maintaining the 45 V breakdown voltage class and SOT-23-3 surface mount package. All BC807 variants listed are Active products with ROHS3 compliance. These parts are suitable for applications where the 2PB709ASL,215 current rating of 100 mA is insufficient.

Within the BC807 series, three gain grades are available:

BC807-16 variants: hFE minimum of 100 @ 100mA, 1V
BC807-25 variants: hFE minimum of 160 @ 100mA, 1V
BC807-40 variants: hFE minimum of 250 @ 100mA, 1V

Selection among gain grades depends on circuit requirements for amplification and switching characteristics. All BC807 variants operate at 100 MHz transition frequency, exceeding the 80 MHz specification of the 2PB709ASL,215.

Packaging Format Considerations:

Tape & Reel (TR) format is standard for high-volume automated assembly. Cut Tape & Digi-Reel® format is suitable for lower-volume production or mixed-component assembly operations. Both formats are compatible with standard surface mount assembly equipment when appropriate tape handling systems are available.

Frequently Asked Questions (FAQ)

Q: Can the 2PB709ASL-QVL be used as a direct replacement for the 2PB709ASL,215?

A: Yes. The 2PB709ASL-QVL is a parametric equivalent with identical electrical specifications including collector current (100 mA), breakdown voltage (45 V), power dissipation (250 mW), transition frequency (80 MHz), and DC current gain (290 @ 2mA, 10V). The parts differ only in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel). Both maintain Active product status and AEC-Q101 automotive qualification.

Q: What is the primary difference between the 2PB709ASL,215 and BC807 series parts?

A: The BC807 series provides five times higher collector current capability (500 mA versus 100 mA) while maintaining the same 45 V breakdown voltage class and SOT-23-3 surface mount package. BC807 parts also operate at higher transition frequency (100 MHz versus 80 MHz). These differences make BC807 parts suitable for applications requiring higher current switching or amplification than the 2PB709ASL,215 can provide.

Q: Are all listed substitute parts automotive-grade?

A: The 2PB709ASL,215 and 2PB709ASL-QVL are explicitly qualified to AEC-Q101 automotive standards. The BC807 series parts listed are Active products with ROHS3 compliance but do not carry explicit AEC-Q101 qualification in the provided specifications. Automotive applications requiring AEC-Q101 certification should use only the Nexperia parts (2PB709ASL,215 or 2PB709ASL-QVL).

Q: What does the gain grade designation (16, 25, 40) in BC807 part numbers indicate?

A: The gain grade indicates the minimum DC current gain (hFE) specification at 100 mA collector current and 1 V collector-emitter voltage. BC807-16 specifies hFE minimum of 100, BC807-25 specifies hFE minimum of 160, and BC807-40 specifies hFE minimum of 250. Selection depends on circuit requirements for amplification and switching speed.

Q: Can BC807 parts be used in circuits designed for the 2PB709ASL,215?

A: BC807 parts can be used in circuits designed for the 2PB709ASL,215 when the circuit design permits higher collector current capability and the application does not require AEC-Q101 automotive qualification. The 45 V breakdown voltage and SOT-23-3 package ensure physical and electrical compatibility. However, the higher current rating and different gain specifications may affect circuit performance characteristics. Circuit analysis is required to confirm suitability for specific applications.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel (TR) format supplies components on continuous tape wound on a reel, suitable for high-volume automated assembly with standard pick-and-place equipment. Cut Tape & Digi-Reel® format supplies components on cut tape segments or on special reels designed for lower-volume or mixed-component assembly. Both formats are compatible with standard surface mount assembly processes when appropriate tape handling systems are available.

Q: Are all substitute parts RoHS compliant?

A: Yes. All parts listed (2PB709ASL,215, 2PB709ASL-QVL, and all BC807 variants) carry ROHS3 compliance status. All parts are also REACH Unaffected and carry EAR99 ECCN classification.

Q: What is the operating temperature range for substitute parts?

A: The 2PB709ASL,215 and 2PB709ASL-QVL specify maximum junction temperature of 150°C. The BC807 series parts specify operating temperature range of −55°C to 150°C, providing wider temperature operating range. Both specifications are suitable for automotive and industrial applications within these temperature limits.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message