2N5885G Equivalent & Substitute Parts

Part Overview

The 2N5885G is an NPN bipolar junction transistor manufactured by onsemi, rated for 60 V collector-emitter breakdown voltage and 25 A maximum collector current in a TO-204 (TO-3) through-hole package. This device is classified as obsolete, making identification of equivalent and substitute parts necessary for ongoing design support and component procurement. The 2N5885G delivers 200 W maximum power dissipation with a transition frequency of 4 MHz and operates across a temperature range of -65°C to 200°C.

Substiute Parts

2N5885G

onsemiIn Stock: 8062N5885G Datasheet

Current PartRFQ

MJ802G

onsemiIn Stock: 33113MJ802G Datasheet

SimilarRFQ

2N3772

Microchip TechnologyIn Stock: 222972N3772 Datasheet

SimilarRFQ

JANTXV2N3772

Microchip TechnologyIn Stock: 766JANTXV2N3772 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 2N5885G is determined by alignment of critical electrical and mechanical parameters: transistor type (NPN), collector-emitter breakdown voltage rating, maximum collector current capacity, power dissipation capability, package form factor (TO-204/TO-3), and through-hole mounting configuration. Substitute parts must maintain compatibility within these defined boundaries to ensure functional equivalence in circuit applications.

The substitute parts identified fall into two distinct categories based on electrical performance alignment:

Category 1: Higher Voltage/Current Rating (MJ802G) — Provides enhanced voltage and current specifications while maintaining identical package and power rating, suitable for applications requiring design margin or upgraded performance.

Category 2: Lower Current Rating (2N3772, JANTXV2N3772) — Operates within the same voltage specification and package form but with significantly reduced current and power capacity, applicable only to circuits with lower current demands.

Parameter Comparison

Engineering Selection Recommendations

MJ802G is the primary substitute for the 2N5885G in applications requiring direct replacement with active product status. Both devices share identical TO-204 (TO-3) package configuration, through-hole mounting, 200 W power rating, and -65°C to 200°C operating temperature range. The MJ802G provides superior voltage rating (90 V versus 60 V) and higher maximum collector current (30 A versus 25 A), establishing it as a pin-compatible upgrade suitable for designs requiring enhanced performance margin. Both parts maintain ROHS3 compliance and REACH unaffected status. The MJ802G is currently in active production with substantial inventory availability (33,051 units).

2N3772 and JANTXV2N3772 share identical electrical specifications but differ in product classification and compliance status. Both operate at 60 V collector-emitter breakdown voltage and maintain TO-204 (TO-3) package compatibility. However, both parts are rated for only 5 mA maximum collector current and 6 W power dissipation, making them unsuitable as direct replacements for the 2N5885G in high-current applications. The JANTXV2N3772 variant carries military qualification (MIL-PRF-19500/518) and is available in bulk packaging. Neither 2N3772 nor JANTXV2N3772 achieves ROHS3 compliance. These parts are applicable only to circuits with collector current requirements below 5 mA.

Frequently Asked Questions (FAQ)

Q: Can the MJ802G directly replace the 2N5885G in existing circuit designs?

A: Yes. The MJ802G is a pin-compatible substitute with identical TO-204 (TO-3) package, through-hole mounting, and 200 W power rating. The higher voltage and current ratings (90 V, 30 A versus 60 V, 25 A) provide design margin without requiring circuit modification. Both parts operate across -65°C to 200°C and maintain ROHS3 compliance.

Q: Why are 2N3772 and JANTXV2N3772 listed as substitutes if they have significantly lower current ratings?

A: These parts are listed based on the provided substitute relationships in the source data. However, they are suitable only for applications with collector current requirements of 5 mA or less. Circuits designed for the 2N5885G's 25 A capability cannot use these lower-rated devices without circuit redesign.

Q: What is the difference between 2N3772 and JANTXV2N3772?

A: Both parts share identical electrical specifications (60 V, 5 mA, 6 W, TO-3 package). The JANTXV2N3772 carries military qualification per MIL-PRF-19500/518 and is supplied in bulk packaging. The standard 2N3772 is available in standard commercial packaging. Neither achieves ROHS3 compliance.

Q: Is the 2N5885G still available for procurement?

A: The 2N5885G is classified as obsolete. However, 697 units are reported in current inventory. For new designs or long-term production requirements, the active MJ802G is the recommended substitute.

Q: How do the transition frequencies compare between substitute options?

A: The 2N5885G operates at 4 MHz transition frequency, while the MJ802G operates at 2 MHz. The 2N3772 and JANTXV2N3772 do not specify transition frequency. For applications sensitive to switching speed, the 2N5885G's higher transition frequency should be considered in the substitution decision.

Q: Are all substitute parts RoHS compliant?

A: No. The MJ802G and 2N5885G both achieve ROHS3 compliance. The 2N3772 and JANTXV2N3772 are RoHS non-compliant. For applications requiring RoHS compliance, only the MJ802G is suitable as a substitute.