2N5883G Equivalent & Substitute Parts

Part Overview

The 2N5883G is a PNP bipolar junction transistor manufactured by onsemi, rated for 60 V collector-emitter breakdown voltage and 25 A maximum collector current in a TO-204 (TO-3) through-hole package. This device is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity. The 2N5883G delivers 200 W maximum power dissipation and operates across a temperature range of -65°C to 200°C, suitable for power amplification and switching applications in industrial and consumer electronics.

Substiute Parts

2N5883G

onsemiIn Stock: 11002N5883G Datasheet

Current PartRFQ

MJ4502G

onsemiIn Stock: 33025MJ4502G Datasheet

SimilarRFQ

2N5883

Microchip TechnologyIn Stock: 10592N5883 Datasheet

SimilarRFQ

2N5885

Microchip TechnologyIn Stock: 7282N5885 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 2N5883G are selected based on electrical and mechanical compatibility within the allowed parameter ranges for PNP power transistors. The substitution logic is structured as follows:

Primary Substitution Criteria:

• Transistor type must be PNP
• Mounting type must be Through Hole
• Package must be TO-204 (TO-3) or equivalent mechanical form factor
• Collector-emitter breakdown voltage must equal or exceed the application requirement (60 V minimum)
• Maximum collector current must equal or exceed the application requirement (25 A minimum)
• Maximum power dissipation must equal or exceed the application requirement (200 W minimum)
• Operating temperature range must encompass the application operating window (-65°C to 200°C)

Substitute Parts Identified:

1. MJ4502G (onsemi) — Exceeds all electrical parameters with 100 V breakdown voltage and 30 A collector current rating, maintaining 200 W power dissipation and TO-204 package compatibility. Product status is Active.

2. 2N5883 (Microchip Technology) — Maintains identical base part number designation with PNP type and through-hole mounting. Specific electrical parameters are not fully detailed in the provided data. Product status is Active.

3. 2N5885 (Microchip Technology) — Maintains PNP type designation with through-hole mounting. Specific electrical parameters are not fully detailed in the provided data. Product status is Active.

Parameter Comparison

Engineering Selection Recommendations

MJ4502G (onsemi) is the primary substitute for the 2N5883G. This part maintains active product status, ROHS3 compliance, and identical operating temperature range. The MJ4502G exceeds all critical electrical parameters: 100 V collector-emitter breakdown voltage (versus 60 V), 30 A maximum collector current (versus 25 A), and 200 W power dissipation. The TO-204 package form factor is mechanically identical. The transition frequency of 2 MHz is lower than the 2N5883G's 4 MHz specification; this difference is acceptable for applications not requiring the higher frequency performance of the original part.

2N5883 (Microchip Technology) and 2N5885 (Microchip Technology) are listed as active alternatives based on base part number alignment and PNP type designation. However, complete electrical parameter specifications are not provided in the available data. These parts carry RoHS non-compliant status, which may restrict their use in applications subject to RoHS regulations. Selection of these alternatives requires verification against specific application requirements and regulatory constraints.

Frequently Asked Questions (FAQ)

Q: Can the MJ4502G directly replace the 2N5883G in all applications?

A: The MJ4502G is electrically compatible as a direct substitute. It maintains the same TO-204 package, through-hole mounting, and operating temperature range. The higher voltage and current ratings provide design margin. The lower transition frequency (2 MHz versus 4 MHz) is acceptable for applications operating below 4 MHz; applications requiring higher frequency performance must be evaluated individually.

Q: What is the significance of the 2N5883G being classified as obsolete?

A: Obsolete status indicates the part is no longer manufactured by onsemi and existing inventory is limited. Substitute parts ensure design continuity and long-term procurement availability. The MJ4502G, with active product status, provides a supported alternative for new designs and ongoing production.

Q: Are the Microchip Technology 2N5883 and 2N5885 suitable replacements?

A: These parts share the PNP type and through-hole mounting characteristics. However, complete electrical parameter data is not available in the provided specifications. Additionally, both carry RoHS non-compliant status, which may conflict with regulatory requirements in certain markets and applications. Detailed datasheet review and compliance verification are necessary before selection.

Q: Does the MJ4502G maintain RoHS compliance?

A: Yes, the MJ4502G is ROHS3 compliant, matching the compliance status of the 2N5883G. This ensures compatibility with RoHS-regulated applications and markets.

Q: What is the impact of the MJ4502G's lower transition frequency?

A: The MJ4502G operates at 2 MHz transition frequency compared to the 2N5883G's 4 MHz. For applications operating at frequencies below 2 MHz, this difference is not significant. Applications requiring switching or amplification at frequencies approaching or exceeding 2 MHz must evaluate the performance impact through circuit simulation or prototype testing.

Q: Are there mechanical differences between the 2N5883G and MJ4502G packages?

A: Both devices use the TO-204 (TO-3) through-hole package with identical mechanical form factor, pin configuration, and mounting requirements. No mechanical redesign is necessary for substitution.