Equivalent & Substitute Parts for 2M39Z B0G Zener Diode

Part Overview

The 2M39Z B0G is a 39 V, 2 W Zener diode manufactured by Taiwan Semiconductor Corporation in DO-204AC (DO-15) axial through-hole packaging. This component is discontinued at DiGi Electronics, necessitating identification of equivalent and substitute parts for ongoing design requirements and production needs. The part maintains ROHS3 compliance and operates across an extended temperature range of -55°C to 175°C.

Key Parameters

Parameter	Value
Voltage - Zener (Nom)	39 V
Power - Max	2 W
Tolerance	±5%
Impedance (Max)	30 Ohms
Current - Reverse Leakage @ Vr	500 nA @ 29.7 V
Operating Temperature	-55°C ~ 175°C
Mounting Type	Through Hole
Package / Case	DO-204AC, DO-15, Axial
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the 2M39Z B0G is determined by the following critical parameters: nominal Zener voltage (39 V), tolerance (±5%), reverse leakage current (500 nA @ 29.7 V), through-hole mounting configuration, and DO-15 axial package compatibility. Power rating, impedance, and operating temperature range are secondary considerations that define the scope of application suitability.

Substitute parts are grouped into two categories:

Direct Equivalent: Parts with identical electrical specifications and active product status, suitable for direct replacement without circuit redesign.

Similar Substitute: Parts with the same Zener voltage and tolerance but differing power ratings, impedance, or temperature ranges, requiring application-level compatibility verification.

Parameter Comparison

Parameter	2M39Z B0G	2M39Z A0G	1N5366B-TP	3EZ39D5-TP
Manufacturer	Taiwan Semiconductor Corporation	Taiwan Semiconductor Corporation	Micro Commercial Co	Micro Commercial Co
Voltage - Zener (Nom)	39 V	39 V	39 V	39 V
Tolerance	±5%	±5%	±5%	±5%
Power - Max	2 W	2 W	5 W	3 W
Impedance (Max)	30 Ohms	30 Ohms	14 Ohms	28 Ohms
Current - Reverse Leakage @ Vr	500 nA @ 29.7 V	500 nA @ 29.7 V	500 nA @ 29.7 V	500 nA @ 29.7 V
Operating Temperature	-55°C ~ 175°C	-55°C ~ 175°C	-55°C ~ 150°C	-55°C ~ 150°C
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	DO-204AC, DO-15, Axial	DO-204AC, DO-15, Axial	DO-204AC, DO-15, Axial	DO-204AC, DO-15, Axial
Product Status	Discontinued at DiGi Electronics	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

2M39Z A0G (Direct Equivalent): This part is the primary substitute for the discontinued 2M39Z B0G. Both components are manufactured by Taiwan Semiconductor Corporation with identical electrical specifications, including 39 V nominal Zener voltage, 2 W maximum power rating, 30 Ohms maximum impedance, and -55°C to 175°C operating temperature range. The 2M39Z A0G maintains active product status and ROHS3 compliance. This part provides direct replacement capability without circuit modification.

1N5366B-TP (Similar Substitute): This Micro Commercial Co part shares the 39 V nominal Zener voltage and ±5% tolerance with the original component. The 1N5366B-TP offers higher power dissipation capability (5 W versus 2 W) and lower impedance (14 Ohms versus 30 Ohms). The operating temperature range is reduced to -55°C to 150°C. This part is suitable for applications where the original 2 W power rating is insufficient or where lower impedance is beneficial. ROHS3 compliance is maintained.

3EZ39D5-TP (Similar Substitute): This Micro Commercial Co part maintains 39 V nominal Zener voltage and ±5% tolerance. The 3EZ39D5-TP provides intermediate power rating (3 W versus 2 W) with impedance of 28 Ohms, closely matching the original specification. Operating temperature range is -55°C to 150°C. This part is suitable for applications requiring modest power rating increase while maintaining impedance characteristics similar to the original component. ROHS3 compliance is maintained.

Frequently Asked Questions (FAQ)

Q: Can the 2M39Z A0G be used as a direct replacement for the 2M39Z B0G?

A: Yes. The 2M39Z A0G is a direct equivalent with identical electrical specifications, including 39 V Zener voltage, 2 W power rating, 30 Ohms impedance, and -55°C to 175°C operating temperature. Both parts use DO-204AC (DO-15) axial through-hole packaging and maintain ROHS3 compliance. No circuit modification is required.

Q: What is the difference between the 1N5366B-TP and the original 2M39Z B0G?

A: The 1N5366B-TP maintains the same 39 V Zener voltage and ±5% tolerance. Primary differences are: power rating increased from 2 W to 5 W, impedance reduced from 30 Ohms to 14 Ohms, and operating temperature range reduced from -55°C to 175°C to -55°C to 150°C. The part is suitable for applications requiring higher power dissipation or lower impedance characteristics.

Q: What is the difference between the 3EZ39D5-TP and the original 2M39Z B0G?

A: The 3EZ39D5-TP maintains the same 39 V Zener voltage and ±5% tolerance. Primary differences are: power rating increased from 2 W to 3 W, impedance slightly reduced from 30 Ohms to 28 Ohms, and operating temperature range reduced from -55°C to 175°C to -55°C to 150°C. The part is suitable for applications requiring modest power rating increase with minimal impedance change.

Q: Are all substitute parts compatible with the DO-15 axial package footprint?

A: Yes. All substitute parts (2M39Z A0G, 1N5366B-TP, and 3EZ39D5-TP) use DO-204AC (DO-15) axial through-hole packaging, ensuring mechanical and electrical compatibility with the original 2M39Z B0G footprint.

Q: Do all substitute parts maintain ROHS3 compliance?

A: Yes. The 2M39Z A0G, 1N5366B-TP, and 3EZ39D5-TP are all ROHS3 compliant, matching the compliance status of the original 2M39Z B0G.

Q: What is the significance of the impedance difference between substitute parts?

A: Impedance affects the dynamic response of the Zener diode during transient voltage changes. The 1N5366B-TP has lower impedance (14 Ohms), providing faster transient response. The 3EZ39D5-TP impedance (28 Ohms) closely matches the original specification (30 Ohms). Selection depends on circuit transient requirements and voltage regulation performance criteria.

Q: Can the higher power-rated substitutes (1N5366B-TP at 5 W or 3EZ39D5-TP at 3 W) be used in place of the 2 W original part?

A: Yes. Higher power-rated parts can be used in circuits designed for the 2 W original part. The higher power rating provides additional thermal margin and does not degrade circuit performance. However, circuit design must ensure that actual power dissipation does not exceed the original 2 W specification unless the thermal design has been modified accordingly.

Q: What is the impact of the reduced operating temperature range in substitute parts?

A: The 1N5366B-TP and 3EZ39D5-TP operate to 150°C maximum junction temperature, compared to 175°C for the original 2M39Z B0G. Applications requiring operation above 150°C junction temperature must use the 2M39Z A0G direct equivalent. For standard industrial and commercial applications operating below 150°C, the reduced range does not present a limitation.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message