2ESDV-10P Terminal Block Plug Equivalent & Substitute Parts

Part Overview

The 2ESDV-10P is a 10-position terminal block plug manufactured by Dinkle Corporation with female sockets, 5.08mm pitch, and screw-rising cage clamp termination. This component is classified as Active product status and is designed for free-hanging in-line applications with 180° wire entry orientation. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate component alternatives that meet equivalent electrical and mechanical specifications.

Substiute Parts

2ESDV-10P

Dinkle Corporation, USAIn Stock: 10352ESDV-10P Datasheet

Current PartRFQ

1-796640-0

TE Connectivity AMP ConnectorsIn Stock: 13281-796640-0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 2ESDV-10P is determined by equivalence across the following critical parameters:

Position and Pitch Compatibility: The substitute part must maintain 10 positions with pitch spacing compatible with the original specification. The 2ESDV-10P operates at 0.200" (5.08mm) pitch. The substitute 1-796640-0 operates at 0.197" (5.00mm) pitch, representing a 0.003" (0.08mm) variance within mechanical tolerance for free-hanging in-line applications.

Electrical Ratings: Both parts share identical UL current (15 A) and voltage (300 V) ratings, ensuring equivalent electrical performance in target applications.

Termination and Mounting: Both parts employ screw-rising cage clamp termination and free-hanging in-line mounting with 180° wire entry, providing functional equivalence in installation and connection methodology.

Wire Gauge Compatibility: The 2ESDV-10P accepts 12-30 AWG (0.2-2.5mm²). The substitute 1-796640-0 accepts 12-30 AWG (0.05-3mm²), providing overlapping wire gauge range with extended upper capacity.

Compliance and Environmental: Both parts maintain MSL 1 (Unlimited) moisture sensitivity and operate across overlapping temperature ranges (-40°C ~ 110°C for substitute versus -40°C ~ 120°C for original), with the substitute providing slightly reduced upper temperature tolerance.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (2ESDV-10P): Select when operating temperature requirements exceed 110°C or when Dinkle Corporation sourcing is mandated by design specification. ROHS3 compliance status applies.

Substitute Part (1-796640-0): Select when TE Connectivity AMP Connectors sourcing is acceptable and operating temperature does not exceed 110°C. This part provides RoHS compliance and extended wire gauge capacity (0.05-3mm²) compared to the original specification range. The 0.003" pitch variance is within mechanical tolerance for free-hanging in-line terminal block applications.

Compliance Considerations: Both parts maintain MSL 1 rating and are suitable for standard moisture environments. The substitute part carries REACH Affected status, whereas the original is REACH Unaffected. Design teams must verify REACH compliance requirements for end-application jurisdictions.

Mechanical Compatibility: The pitch variance of 0.003" (0.08mm) between parts does not prevent mechanical interchangeability in free-hanging in-line mounting configurations. Both parts employ identical screw-rising cage clamp termination and 180° wire entry orientation.

Frequently Asked Questions (FAQ)

Q: Can the 1-796640-0 substitute directly replace the 2ESDV-10P in all applications?

A: Direct substitution is valid when operating temperature remains below 110°C. The 2ESDV-10P maintains a maximum operating temperature of 120°C, while the substitute operates to 110°C. Applications requiring operation above 110°C require the original 2ESDV-10P. All other electrical and mechanical parameters are equivalent or compatible.

Q: What is the significance of the 0.003" pitch difference between the two parts?

A: The pitch variance (0.200" versus 0.197") represents a 0.003" (0.08mm) difference. For free-hanging in-line terminal block applications, this variance falls within standard mechanical tolerance and does not prevent physical interchangeability or functional performance.

Q: Are the wire gauge ranges compatible between these parts?

A: Both parts accept 12-30 AWG wire. The 2ESDV-10P accepts 0.2-2.5mm² cross-section, while the 1-796640-0 accepts 0.05-3mm². The substitute provides extended capacity at both lower and upper wire gauge limits, maintaining full compatibility with the original specification range.

Q: What compliance differences exist between these parts?

A: The 2ESDV-10P is ROHS3 Compliant and REACH Unaffected. The 1-796640-0 is RoHS Compliant and REACH Affected. Both maintain MSL 1 (Unlimited) moisture sensitivity rating. Design teams must verify REACH compliance requirements for target markets and applications.

Q: Do both parts use identical termination methods?

A: Yes. Both the 2ESDV-10P and 1-796640-0 employ screw-rising cage clamp termination with 180° wire entry orientation and free-hanging in-line mounting. Installation procedures and tooling requirements are equivalent.

Q: What is the current and voltage rating equivalence?

A: Both parts are rated for 15 A (UL) and 300 V (UL), providing identical electrical performance specifications for circuit protection and voltage isolation requirements.