2EDF7175FXUMA1 Equivalent & Substitute Parts

Part Overview

The 2EDF7175FXUMA1 is a half-bridge gate driver IC manufactured by Infineon Technologies, designed for independent N-Channel and P-Channel MOSFET gate driving applications. This component operates with a 20V supply voltage and delivers peak output currents of 1A (source) and 2A (sink), making it suitable for power management and switching applications requiring precise gate control.

The 2EDF7175FXUMA1 is currently discontinued at DiGi Electronics. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and replacement applications.

Substiute Parts

2EDF7175FXUMA1

Infineon TechnologiesIn Stock: 22652EDF7175FXUMA1 Datasheet

Current PartRFQ

2EDF7175FXUMA2

Infineon TechnologiesIn Stock: 199062EDF7175FXUMA2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 2EDF7175FXUMA1 is determined by strict equivalence across the following critical parameters:

• Driven Configuration: Half-Bridge topology
• Number of Drivers: 2 independent channels
• Gate Type: N-Channel and P-Channel MOSFET support
• Voltage - Supply: 20V nominal
• Current - Peak Output: 1A source, 2A sink
• Input Type: Non-Inverting logic
• Package / Case: 16-SOIC form factor
• Operating Temperature Range: -40°C to 125°C

The 2EDF7175FXUMA2 meets all these criteria and qualifies as a direct substitute. The primary distinction between these parts is packaging configuration and product status.

Parameter Comparison

Engineering Selection Recommendations

The 2EDF7175FXUMA2 is the direct substitute for the 2EDF7175FXUMA1. Both parts share identical electrical specifications, thermal characteristics, and compliance certifications (ROHS3, REACH Unaffected). The 2EDF7175FXUMA2 is currently in active production status with higher inventory availability (19,831 pcs in stock versus 2,200 pcs for the discontinued variant).

The 2EDF7175FXUMA2 is supplied in Tape & Reel (TR) packaging configuration, which is standard for high-volume manufacturing and automated assembly processes. This packaging format is compatible with standard pick-and-place equipment and does not introduce any functional or electrical differences compared to the original part.

For applications requiring the 2EDF7175FXUMA1, the 2EDF7175FXUMA2 provides full electrical and mechanical compatibility with no design modifications required.

Frequently Asked Questions (FAQ)

Q: Are the 2EDF7175FXUMA1 and 2EDF7175FXUMA2 electrically identical?

A: Yes. Both parts deliver identical electrical performance across all specified parameters including supply voltage (20V), peak output currents (1A source, 2A sink), rise/fall times (6.5ns, 4.5ns), and operating temperature range (-40°C to 125°C).

Q: What is the difference between these two part numbers?

A: The primary difference is packaging configuration. The 2EDF7175FXUMA1 uses standard packaging, while the 2EDF7175FXUMA2 is supplied in Tape & Reel (TR) format. Additionally, the 2EDF7175FXUMA2 maintains active production status, whereas the 2EDF7175FXUMA1 is discontinued.

Q: Can I use 2EDF7175FXUMA2 as a direct replacement on existing PCBs designed for 2EDF7175FXUMA1?

A: Yes. Both parts use the identical 16-SOIC (0.154", 3.90mm Width) package and surface mount configuration. No PCB layout modifications are required.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical compliance certifications: ROHS3 Compliant, REACH Unaffected, and Moisture Sensitivity Level 3 (168 Hours).

Q: Which part should I specify for new designs?

A: The 2EDF7175FXUMA2 is recommended for new designs due to its active production status and higher inventory availability.