2DD2150R-13 Equivalent & Substitute Parts

Part Overview

The 2DD2150R-13 is an NPN bipolar junction transistor manufactured by Diodes Incorporated, designed for surface mount applications in the SOT-89-3 package. This component operates at a maximum collector current of 3 A and collector-emitter breakdown voltage of 20 V, with a maximum power dissipation of 1 W. The part is classified as obsolete, necessitating identification of equivalent and substitute components for ongoing design requirements and production continuity. Substitute parts must maintain electrical compatibility across critical parameters including voltage rating, current capacity, and thermal characteristics while accommodating available packaging options.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN	—
Current - Collector (Ic) (Max)	3	A
Voltage - Collector Emitter Breakdown (Max)	20	V
Vce Saturation (Max) @ Ib, Ic	500mV @ 100mA, 2A	—
Current - Collector Cutoff (Max)	100	nA
DC Current Gain (hFE) (Min) @ Ic, Vce	180 @ 100mA, 2V	—
Power - Max	1	W
Frequency - Transition	160	MHz
Operating Temperature	-55 to 150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-243AA	—
Supplier Device Package	SOT-89-3	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the 2DD2150R-13 is determined by electrical and mechanical compatibility across the following critical parameters:

Voltage Rating: All substitute parts must maintain a collector-emitter breakdown voltage (VCEO) of 20 V or greater to ensure safe operation within the original design envelope.

Current Capacity: Substitute parts must support a maximum collector current (Ic) of 3 A or greater. Parts with lower current ratings (1 A or 2 A) are acceptable only when circuit design permits operation at reduced current levels.

Package Compatibility: The original part uses SOT-89-3 (TO-243AA) packaging. Substitutes in alternative packages such as SOT-23-3 require PCB layout modification but remain electrically compatible.

Thermal Characteristics: Operating temperature range and power dissipation capacity must support the thermal requirements of the application. The original part specifies -55°C to 150°C operation with 1 W maximum power.

Compliance Requirements: All substitute parts must maintain RoHS3 compliance and MSL Level 1 rating to ensure regulatory and manufacturing process compatibility.

Product Status: Active status substitutes are preferred for long-term availability and supply chain stability.

Parameter Comparison

Parameter	2DD2150R-13 (Main)	2PD2150,115	BC868,115	BC868-25,115	NSS20201LT1G	PBSS4320X,135	PBSS4520X,135
Manufacturer	Diodes Inc.	NXP Semiconductors	Nexperia USA Inc.	Nexperia USA Inc.	onsemi	Nexperia USA Inc.	Nexperia USA Inc.
Transistor Type	NPN	NPN	NPN	NPN	NPN	NPN	NPN
Ic (Max) [A]	3	3	1	2	2	3	5
VCEO (Max) [V]	20	20	20	20	20	20	20
Vce Saturation (Max) [mV]	500 @ 100mA, 2A	500 @ 100mA, 2A	500 @ 100mA, 1A	600 @ 200mA, 2A	100 @ 200mA, 2A	310 @ 300mA, 3A	220 @ 500mA, 5A
ICBO (Max) [nA]	100	100	100	100	100	100	100
hFE (Min)	180 @ 100mA, 2V	180 @ 100mA, 2V	85 @ 500mA, 1V	160 @ 500mA, 1V	200 @ 500mA, 2V	200 @ 2A, 2V	250 @ 2A, 2V
Power - Max [W]	1	2	1.2	0.5	0.46	1.6	0.55
Frequency - Transition [MHz]	160	220	170	170	150	100	125
Operating Temperature [°C]	-55 to 150	150	150	150	-55 to 150	150	150
Package / Case	TO-243AA	TO-243AA	TO-243AA	TO-243AA	TO-236-3	TO-243AA	TO-243AA
Supplier Device Package	SOT-89-3	SOT-89	SOT-89	SOT-89	SOT-23-3	SOT-89	SOT-89
Product Status	Obsolete	Active	Active	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	—	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

Primary Substitute: 2PD2150,115

The 2PD2150,115 manufactured by NXP Semiconductors is the direct electrical equivalent to the 2DD2150R-13. This part maintains identical maximum collector current (3 A), collector-emitter breakdown voltage (20 V), saturation voltage characteristics, and cutoff current specifications. The 2PD2150,115 is active in production status, ensuring long-term availability and supply chain continuity. It is packaged in SOT-89 (TO-243AA), matching the original package footprint. The part exceeds the original power rating at 2 W versus 1 W, providing additional thermal margin. RoHS3 compliance and MSL Level 1 rating are maintained.

Secondary Substitute: PBSS4320X,135

The PBSS4320X,135 manufactured by Nexperia USA Inc. provides electrical compatibility with identical maximum collector current (3 A) and collector-emitter breakdown voltage (20 V). This part features improved saturation voltage characteristics (310 mV at 3 A versus 500 mV at 2 A) and higher DC current gain (200 at 2 A). The PBSS4320X,135 is qualified to AEC-Q100 automotive standards and carries active product status. It is packaged in SOT-89 (TO-243AA), maintaining footprint compatibility. Power dissipation is rated at 1.6 W, exceeding the original specification. RoHS3 compliance and MSL Level 1 rating are maintained.

Tertiary Substitute: BC868-25,115

The BC868-25,115 manufactured by Nexperia USA Inc. supports maximum collector current of 2 A, which is lower than the original 3 A specification. This part is suitable for applications where circuit design permits operation at reduced current levels. It maintains the 20 V collector-emitter breakdown voltage and is packaged in SOT-89 (TO-243AA). The part is active in production status with RoHS3 compliance and MSL Level 1 rating.

Alternative Package Substitute: NSS20201LT1G

The NSS20201LT1G manufactured by onsemi provides electrical compatibility with 2 A maximum collector current and 20 V collector-emitter breakdown voltage. This part features superior saturation voltage performance (100 mV at 2 A) and higher DC current gain (200 at 500 mA). The NSS20201LT1G is packaged in SOT-23-3 (TO-236), which differs from the original SOT-89-3 package and requires PCB layout modification. Operating temperature range matches the original specification at -55°C to 150°C. The part is active in production status with RoHS3 compliance and MSL Level 1 rating.

High-Current Substitute: PBSS4520X,135

The PBSS4520X,135 manufactured by Nexperia USA Inc. supports maximum collector current of 5 A, exceeding the original 3 A specification. This part maintains 20 V collector-emitter breakdown voltage and is packaged in SOT-89 (TO-243AA). The PBSS4520X,135 is qualified to AEC-Q100 automotive standards and carries active product status. Superior saturation voltage characteristics (220 mV at 5 A) and higher DC current gain (250 at 2 A) are provided. RoHS3 compliance and MSL Level 1 rating are maintained.

Lower-Current Substitute: BC868,115

The BC868,115 manufactured by Nexperia USA Inc. supports maximum collector current of 1 A, which is lower than the original 3 A specification. This part is suitable only for applications where circuit design permits operation at significantly reduced current levels. It maintains the 20 V collector-emitter breakdown voltage and is packaged in SOT-89 (TO-243AA). The part is active in production status with RoHS3 compliance and MSL Level 1 rating.

Frequently Asked Questions (FAQ)

Q: Can the 2PD2150,115 be used as a direct replacement for the 2DD2150R-13?

A: Yes. The 2PD2150,115 maintains identical electrical specifications for maximum collector current (3 A), collector-emitter breakdown voltage (20 V), saturation voltage, and cutoff current. Both parts use the same SOT-89 (TO-243AA) package footprint. The 2PD2150,115 is active in production status, providing supply chain continuity.

Q: What is the difference between SOT-89 and SOT-23 packages?

A: SOT-89 and SOT-23 are distinct surface mount packages with different physical dimensions and pin configurations. SOT-89 (TO-243AA) is a three-pin package with larger lead spacing suitable for higher current applications. SOT-23-3 (TO-236) is a smaller three-pin package. Substitution between these packages requires PCB layout modification and cannot be performed without design changes.

Q: Can BC868-25,115 replace the 2DD2150R-13 in all applications?

A: The BC868-25,115 supports maximum collector current of 2 A, which is lower than the original 3 A specification. This part is suitable only for applications where circuit design permits operation at 2 A or lower. Verification of circuit current requirements is necessary before substitution.

Q: What are the advantages of PBSS4320X,135 over the 2DD2150R-13?

A: The PBSS4320X,135 maintains identical maximum collector current (3 A) and collector-emitter breakdown voltage (20 V). It provides improved saturation voltage characteristics (310 mV at 3 A versus 500 mV at 2 A), higher DC current gain (200 at 2 A), and higher power dissipation rating (1.6 W versus 1 W). The part is qualified to AEC-Q100 automotive standards and carries active product status.

Q: Is NSS20201LT1G compatible with the original PCB layout?

A: No. The NSS20201LT1G is packaged in SOT-23-3 (TO-236), which differs from the original SOT-89-3 (TO-243AA) package. PCB layout modification is required for this substitution. The part supports 2 A maximum collector current, which is lower than the original 3 A specification.

Q: What is the significance of AEC-Q100 qualification on PBSS4320X,135 and PBSS4520X,135?

A: AEC-Q100 qualification indicates that these parts meet automotive industry reliability and quality standards. This qualification is relevant for applications requiring automotive-grade components but does not affect electrical compatibility with the original 2DD2150R-13 for non-automotive applications.

Q: Can PBSS4520X,135 be used in place of 2DD2150R-13?

A: Yes. The PBSS4520X,135 maintains the 20 V collector-emitter breakdown voltage and is packaged in SOT-89 (TO-243AA), matching the original footprint. It supports 5 A maximum collector current, exceeding the original 3 A specification. The part is active in production status with RoHS3 compliance and MSL Level 1 rating.

Q: What operating temperature range should be considered for substitution?

A: The original 2DD2150R-13 specifies -55°C to 150°C operating temperature. Most substitute parts specify 150°C maximum without a lower temperature limit. The NSS20201LT1G maintains the full -55°C to 150°C range. For applications requiring operation below 0°C, the NSS20201LT1G is the appropriate choice.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed maintain RoHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring regulatory and manufacturing process compatibility with the original 2DD2150R-13.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message