Equivalent & Substitute Parts for 2DB1424R-13

Part Overview

The 2DB1424R-13 is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 20V collector-emitter breakdown voltage and 3A maximum collector current in a surface mount SOT-89-3 package. This component is classified as obsolete, necessitating identification of active equivalent and substitute parts for ongoing design support and procurement.

The 2DB1424R-13 operates across a temperature range of -55°C to 150°C with a maximum power dissipation of 1W and transition frequency of 220MHz. Its electrical characteristics include a saturation voltage of 500mV at 100mA base current and 2A collector current, with a minimum DC current gain of 180 at 100mA collector current and 2V collector-emitter voltage.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Voltage - Collector Emitter Breakdown (Max)	20	V
Current - Collector (Ic) (Max)	3	A
Power - Max	1	W
Frequency - Transition	220	MHz
Operating Temperature Range	-55 to 150	°C
Package / Case	TO-243AA (SOT-89-3)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the 2DB1424R-13 is determined by electrical and mechanical compatibility across the following critical parameters:

Voltage Rating: All substitute parts maintain the 20V collector-emitter breakdown voltage specification, ensuring compatibility with circuit voltage constraints.

Package and Mounting: All substitute parts use the TO-243AA surface mount package (SOT-89-3 or SOT-89 variants), maintaining mechanical and thermal interface compatibility with existing PCB layouts.

Transistor Type: All substitutes are PNP bipolar junction transistors, preserving circuit polarity and biasing requirements.

Current Rating: Substitute parts are grouped by maximum collector current capacity. Parts rated at 3A or higher (2PB1424, PBSS5320X, PBSS5520X) provide direct current compatibility. Parts rated below 3A (FCX718TA at 2.5A, BC869-25 at 2A, BC869 at 1A) represent current-limited alternatives suitable for applications not requiring full 3A capacity.

Power Dissipation: Substitute parts range from 500mW to 2W maximum power ratings. The 2DB1424R-13 specifies 1W; substitutes with equal or higher power ratings maintain thermal design margins.

Frequency Response: Transition frequency ranges from 100MHz to 220MHz across the substitute group. The 2DB1424R-13 operates at 220MHz; lower-frequency substitutes are suitable for applications with reduced bandwidth requirements.

Product Status: The 2DB1424R-13 is obsolete. Active substitute parts ensure long-term availability and supply chain continuity.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Ic (Max) [A]	Vce Breakdown (Max) [V]	Power (Max) [W]	Frequency - Transition [MHz]	Vce Sat @ Ib, Ic [mV]	hFE (Min) @ Ic, Vce	Product Status	Package
2DB1424R-13	Diodes Incorporated	3	20	1	220	500 @ 100mA, 2A	180 @ 100mA, 2V	Obsolete	SOT-89-3
FCX718TA	Diodes Incorporated	2.5	20	2	180	300 @ 200mA, 2.5A	150 @ 2A, 2V	Active	SOT-89-3
2PB1424,115	Nexperia USA Inc.	3	20	2	125	500 @ 100mA, 2A	180 @ 100mA, 2V	Active	SOT-89
PBSS5320X,135	Nexperia USA Inc.	3	20	1.6	100	300 @ 300mA, 3A	150 @ 2A, 2V	Active	SOT-89
BC869,115	Nexperia USA Inc.	1	20	1.2	140	500 @ 100mA, 1A	85 @ 500mA, 1V	Active	SOT-89
BC869-16,115	Nexperia USA Inc.	1	20	1.2	140	500 @ 100mA, 1A	100 @ 500mA, 1V	Active	SOT-89
BC869-25,115	Nexperia USA Inc.	2	20	0.5	140	600 @ 200mA, 2A	160 @ 500mA, 1V	Active	SOT-89
PBSS5520X,135	Nexperia USA Inc.	5	20	1.6	100	270 @ 500mA, 5A	250 @ 2A, 2V	Active	SOT-89

Engineering Selection Recommendations

Direct Replacement (Electrical and Mechanical Equivalence):

The 2PB1424,115 manufactured by Nexperia USA Inc. provides the closest electrical equivalence to the 2DB1424R-13. Both parts specify 3A maximum collector current, 500mV saturation voltage at identical bias conditions (100mA base current, 2A collector current), and identical DC current gain of 180 at 100mA and 2V. The 2PB1424,115 is active and available in production quantities. The transition frequency is reduced from 220MHz to 125MHz; this substitution is suitable for applications where the full bandwidth of the original part is not required.

Higher Power Capability Substitute:

The PBSS5320X,135 from Nexperia USA Inc. maintains the 3A current rating and adds automotive-grade qualification (AEC-Q100) with improved saturation voltage performance (300mV at 300mA, 3A). Power dissipation increases to 1.6W, providing enhanced thermal margin. The transition frequency is 100MHz. This part is suitable for applications requiring automotive-grade reliability and lower saturation losses.

Higher Current Capability Substitute:

The PBSS5520X,135 from Nexperia USA Inc. extends the current rating to 5A while maintaining the 20V voltage specification and automotive-grade qualification. This part is suitable for applications requiring current capacity beyond the original 3A specification. Transition frequency is 100MHz.

Current-Limited Substitutes:

The FCX718TA from Diodes Incorporated (same manufacturer as the original part) provides 2.5A current capacity with improved power dissipation (2W) and lower saturation voltage (300mV). This substitute is suitable for applications where collector current does not exceed 2.5A.

The BC869-25,115 from Nexperia USA Inc. provides 2A current capacity with automotive-grade qualification. This substitute is suitable for lower-current applications.

The BC869,115 and BC869-16,115 from Nexperia USA Inc. provide 1A current capacity with automotive-grade qualification. These substitutes are suitable for low-current signal switching applications.

Compliance and Availability:

All substitute parts are RoHS3 compliant and REACH unaffected, matching the environmental compliance of the original part. All active substitutes carry unlimited moisture sensitivity level (MSL 1). The PBSS5320X,135, BC869,115, BC869-16,115, BC869-25,115, and PBSS5520X,135 carry AEC-Q100 automotive qualification, providing additional reliability assurance for automotive and industrial applications.

Frequently Asked Questions (FAQ)

Q: Can the 2DB1424R-13 be directly replaced with any of these substitutes in existing designs?

A: Direct replacement depends on application current and frequency requirements. The 2PB1424,115 provides identical electrical characteristics at 3A and is the closest direct replacement. Applications operating below 3A can use FCX718TA (2.5A), BC869-25,115 (2A), or BC869,115/BC869-16,115 (1A). All substitutes maintain the 20V voltage rating and SOT-89 package compatibility.

Q: What is the difference between SOT-89-3 and SOT-89 packaging?

A: Both designations refer to the same three-terminal surface mount package (TO-243AA). The "-3" suffix in SOT-89-3 explicitly indicates three terminals. The packages are mechanically and electrically compatible for PCB layout purposes.

Q: Are automotive-grade parts (AEC-Q100) required for this application?

A: Automotive-grade qualification is not required unless the application is automotive or operates in harsh industrial environments. The PBSS5320X,135, BC869,115, BC869-16,115, BC869-25,115, and PBSS5520X,135 carry AEC-Q100 qualification. Non-automotive applications can use any active substitute meeting current and voltage requirements.

Q: How does transition frequency affect substitution suitability?

A: Transition frequency determines the maximum useful operating frequency of the transistor. The 2DB1424R-13 operates at 220MHz. Substitutes with lower transition frequencies (100MHz to 180MHz) are suitable for applications operating below their specified frequency. Applications requiring the full 220MHz bandwidth should use FCX718TA (180MHz) or verify that lower-frequency substitutes meet circuit timing requirements.

Q: What is the significance of saturation voltage differences between substitutes?

A: Saturation voltage (Vce Sat) determines the voltage drop across the transistor in the saturated (fully conducting) state. Lower saturation voltages reduce power dissipation and heat generation. The 2DB1424R-13 specifies 500mV at 100mA, 2A. Substitutes with lower saturation voltages (FCX718TA at 300mV, PBSS5320X at 300mV, PBSS5520X at 270mV) provide improved efficiency in switching applications.

Q: Can I use a higher-current-rated part (PBSS5520X at 5A) in place of the 3A-rated 2DB1424R-13?

A: Yes. Higher current ratings provide design margin and do not create compatibility issues. The PBSS5520X,135 maintains the 20V voltage specification and SOT-89 package, with automotive-grade qualification. This substitution is suitable for applications where additional current capacity provides system-level benefits.

Q: What inventory considerations apply to these substitutes?

A: The 2DB1424R-13 is obsolete with 15,200 pieces in stock. Active substitutes have varying inventory levels: FCX718TA (16,960 pcs), 2PB1424,115 (3,100 pcs), PBSS5320X,135 (9,044 pcs), BC869,115 (3,100 pcs), BC869-16,115 (1,068 pcs), BC869-25,115 (3,219 pcs), and PBSS5520X,135 (2,735 pcs). For long-term supply assurance, active parts with higher inventory levels are preferred.

Q: Are there any thermal design considerations when substituting parts?

A: Power dissipation ratings differ across substitutes. The 2DB1424R-13 specifies 1W maximum. Substitutes with higher power ratings (FCX718TA at 2W, 2PB1424,115 at 2W, PBSS5320X at 1.6W, PBSS5520X at 1.6W) provide improved thermal performance. Substitutes with lower power ratings (BC869-25,115 at 500mW, BC869,115 at 1.2W) require verification that circuit power dissipation does not exceed rated limits.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message