Equivalent & Substitute Parts for 2A07-AP

Part Overview

The 2A07-AP is a general-purpose rectifier diode manufactured by Micro Commercial Co, rated for 1000 V DC reverse voltage and 2 A average rectified current in a DO-15 through-hole package. This component is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing design requirements and procurement needs. Substitute parts must maintain electrical performance within the specified operating parameters while offering current product availability and active manufacturer support.

Substiute Parts

2A07-AP

Micro Commercial CoIn Stock: 8632A07-AP Datasheet

Current PartRFQ

RL207GP-AP

Micro Commercial CoIn Stock: 1130RL207GP-AP Datasheet

DirectRFQ

RGP15M-E3/54

Vishay General Semiconductor - Diodes DivisionIn Stock: 5995RGP15M-E3/54 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 2A07-AP is determined by the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

• Voltage - DC Reverse (Vr) (Max): Must equal or exceed 1000 V
• Current - Average Rectified (Io): Must equal or exceed 2 A
• Mounting Type: Must be Through Hole
• Package / Case: Must be compatible with DO-15 or DO-204AC form factors
• Operating Temperature Range: Must encompass or exceed -55°C to 150°C
• RoHS Compliance: Must maintain ROHS3 Compliant status

Direct Equivalent Classification: Parts meeting all primary criteria with identical electrical ratings are classified as direct equivalents and provide pin-for-pin compatibility.

Similar Substitute Classification: Parts meeting all primary criteria but with variations in secondary parameters (such as forward voltage, recovery speed, or temperature range) are classified as similar substitutes. These parts are functionally compatible within the specified application envelope but may require circuit-level verification for performance-critical applications.

Parameter Comparison

Engineering Selection Recommendations

RL207GP-AP (Direct Equivalent - Recommended Primary Substitute)

The RL207GP-AP is manufactured by Micro Commercial Co and maintains identical electrical specifications to the 2A07-AP across all critical parameters: 1000 V reverse voltage, 2 A average rectified current, 1 V forward voltage at 2 A, and -55°C to 150°C operating temperature range. This part holds active product status with ROHS3 compliance and represents a direct functional replacement. Higher inventory availability (1090 units) supports procurement continuity.

RGP15M-E3/54 (Similar Substitute - Secondary Option)

The RGP15M-E3/54 is manufactured by Vishay General Semiconductor and meets the primary voltage and package requirements with 1000 V reverse voltage and DO-15 form factor compatibility. This part differs in current rating (1.5 A versus 2 A) and incorporates fast recovery characteristics (≤500 ns versus >500 ns). The extended operating temperature range (-65°C to 175°C) and active product status with ROHS3 compliance provide additional design margin. This substitute is suitable for applications where the 1.5 A current rating is sufficient and fast recovery characteristics are beneficial or neutral. Significantly higher inventory availability (5951 units) supports supply chain resilience.

Frequently Asked Questions (FAQ)

Q: Can RL207GP-AP be used as a direct replacement for 2A07-AP?

A: Yes. The RL207GP-AP is a direct equivalent with identical voltage rating (1000 V), current rating (2 A), forward voltage (1 V @ 2 A), and operating temperature range (-55°C to 150°C). Both parts use the same DO-15 through-hole package and maintain ROHS3 compliance. Pin-for-pin substitution is supported.

Q: What is the key difference between RL207GP-AP and RGP15M-E3/54?

A: The primary difference is current rating: RL207GP-AP is rated for 2 A average rectified current, while RGP15M-E3/54 is rated for 1.5 A. Additionally, RGP15M-E3/54 features fast recovery characteristics (≤500 ns) compared to standard recovery (>500 ns) in RL207GP-AP. Both maintain 1000 V reverse voltage and DO-15 package compatibility.

Q: Can RGP15M-E3/54 be used in applications requiring 2 A current?

A: No. The RGP15M-E3/54 is rated for maximum 1.5 A average rectified current. Using this part in a 2 A application would exceed its current rating and violate component specifications. This part is suitable only for applications where the required current does not exceed 1.5 A.

Q: Are all three parts compatible with the same PCB footprint?

A: Yes. All three parts use the DO-15 through-hole axial package format and are compatible with identical PCB footprints and mounting procedures. Physical dimensions and lead spacing are equivalent across 2A07-AP, RL207GP-AP, and RGP15M-E3/54.

Q: What is the significance of fast recovery versus standard recovery?

A: Recovery speed refers to the time required for the diode to transition from forward conduction to reverse blocking. RGP15M-E3/54 features fast recovery (≤500 ns), while RL207GP-AP features standard recovery (>500 ns). Fast recovery reduces switching losses in high-frequency applications but is not required for standard rectification circuits. Both recovery speeds are acceptable for general-purpose rectification.

Q: Are there compliance or certification differences between the substitutes?

A: All three parts maintain ROHS3 compliance and EAR99 ECCN classification. RL207GP-AP and RGP15M-E3/54 both include REACH Unaffected status. Moisture Sensitivity Level (MSL) is 1 (Unlimited) for all parts, indicating no moisture sensitivity constraints during storage or handling.

Q: Which substitute offers the best supply availability?

A: RGP15M-E3/54 offers the highest inventory availability at 5951 units in stock, followed by RL207GP-AP at 1090 units. For applications where current requirements do not exceed 1.5 A, RGP15M-E3/54 provides superior supply chain resilience.