Equivalent & Substitute Parts for 2A01-T

Part Overview

The 2A01-T is a general-purpose rectifier diode manufactured by Diodes Incorporated, rated for 50 V DC reverse voltage and 2 A average rectified current in a DO-15 through-hole axial package. This part is classified as obsolete, which necessitates identification of active equivalent and substitute components for ongoing production and maintenance applications. Equivalent parts maintain identical electrical specifications and package compatibility, while substitute parts may offer enhanced performance characteristics or improved availability while remaining functionally compatible within the specified parameter ranges.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	50	V
Current - Average Rectified (Io)	2	A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 2 A	V
Speed	Standard Recovery >500ns, > 200mA (Io)	-
Current - Reverse Leakage @ Vr	5	µA @ 50 V
Mounting Type	Through Hole	-
Package / Case	DO-204AC, DO-15, Axial	-
Operating Temperature - Junction	-65°C ~ 150°C	-
RoHS Status	ROHS3 Compliant	-

Substitute Part Grouping Explanation

Substitution eligibility for the 2A01-T is determined by the following critical parameters:

Mandatory Compatibility Criteria:

Voltage - DC Reverse (Vr) (Max): 50 V minimum
Current - Average Rectified (Io): 2 A minimum
Mounting Type: Through Hole
Package / Case: DO-15, DO-204AC, or DO-201AA axial configurations
Operating Temperature Range: Must encompass or exceed -65°C to 150°C

Acceptable Variation Parameters:

Voltage - Forward (Vf): Up to 1.1 V @ rated current
Current - Reverse Leakage @ Vr: Up to 5 µA @ 50 V
Recovery Speed: Standard or Fast Recovery acceptable
RoHS Compliance: ROHS3 Compliant required

Parts are grouped into two categories: Direct Equivalents maintain identical electrical and package specifications, while Functional Substitutes meet or exceed all mandatory criteria with enhanced performance characteristics such as faster recovery time or higher current ratings.

Parameter Comparison

Parameter	2A01-T (Diodes Inc.)	GPP20A-E3/54 (Vishay)	EGP20A (Fairchild)	EGP20A-E3/54 (Vishay)	SBYV27-50-E3/54 (Vishay)	1N5400RLG (onsemi)
Voltage - DC Reverse (Vr) (Max)	50 V	50 V	50 V	50 V	50 V	50 V
Current - Average Rectified (Io)	2 A	2 A	2 A	2 A	2 A	3 A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 2 A	1.1 V @ 2 A	950 mV @ 2 A	950 mV @ 2 A	1.07 V @ 3 A	1 V @ 3 A
Speed	Standard Recovery >500ns	Standard Recovery >500ns	Fast Recovery ≤500ns	Fast Recovery ≤500ns	Fast Recovery ≤500ns	Standard Recovery >500ns
Current - Reverse Leakage @ Vr	5 µA @ 50 V	5 µA @ 50 V	5 µA @ 50 V	5 µA @ 50 V	5 µA @ 50 V	10 µA @ 50 V
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Package / Case	DO-204AC, DO-15, Axial	DO-204AC, DO-15, Axial	DO-204AC, DO-15, Axial	DO-204AC, DO-15, Axial	DO-204AC, DO-15, Axial	DO-201AA, DO-27, Axial
Operating Temperature - Junction	-65°C ~ 150°C	-55°C ~ 150°C	-65°C ~ 150°C	-65°C ~ 150°C	-55°C ~ 150°C	-65°C ~ 150°C
Product Status	Obsolete	Active	Active	Active	Active	Not For New Designs
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Not specified	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

Direct Equivalents (Recommended for Replacement):

GPP20A-E3/54 and EGP20A-E3/54 are the primary recommended substitutes for the obsolete 2A01-T. Both parts maintain the 50 V / 2 A electrical specification and DO-15 package compatibility. GPP20A-E3/54 (Vishay) is classified as active product status with standard recovery characteristics matching the original 2A01-T specification. EGP20A-E3/54 (Vishay) offers enhanced performance with fast recovery time (≤500ns, 50 ns trr) while maintaining identical voltage and current ratings, providing improved efficiency in switching applications. Both parts are ROHS3 compliant and carry unlimited moisture sensitivity rating (MSL 1).

Performance-Enhanced Substitutes:

EGP20A (Fairchild) provides fast recovery performance (≤500ns, 50 ns trr) with reduced forward voltage (950 mV @ 2 A) compared to the 2A01-T standard recovery specification. This part is active and maintains full temperature range compatibility (-65°C ~ 150°C). SBYV27-50-E3/54 (Vishay) offers the fastest recovery time (15 ns trr) among all listed substitutes, with marginally reduced forward voltage specification (1.07 V @ 3 A). This part operates within -55°C ~ 150°C range, which is acceptable for most applications requiring the original -65°C lower limit only in extreme cold environments.

Higher Current Capacity Substitute:

1N5400RLG (onsemi) provides 3 A average rectified current capacity versus the 2 A specification of the 2A01-T, offering design margin for applications with potential current growth. This part is classified as "Not For New Designs" and carries higher reverse leakage (10 µA @ 50 V) compared to the 2 A alternatives. The DO-201AA package is mechanically compatible with DO-15 footprints in most through-hole applications.

Selection Criteria by Application:

For direct replacement in existing designs, select GPP20A-E3/54 or EGP20A-E3/54 to maintain specification parity with the 2A01-T. For new designs or performance optimization, EGP20A-E3/54 or EGP20A are preferred due to active product status and fast recovery characteristics. Avoid 1N5400RLG for new designs due to its "Not For New Designs" classification, reserving this part only for legacy system maintenance where higher current capacity is beneficial.

Frequently Asked Questions (FAQ)

Q: Can GPP20A-E3/54 directly replace the obsolete 2A01-T without circuit modification?

A: Yes. GPP20A-E3/54 maintains identical voltage (50 V), current (2 A), and package (DO-15) specifications as the 2A01-T. The standard recovery speed (>500ns) matches the original part. Direct substitution is possible without circuit redesign.

Q: What is the difference between EGP20A and EGP20A-E3/54?

A: Both parts share identical electrical specifications (50 V, 2 A, fast recovery ≤500ns, 50 ns trr). EGP20A is supplied in bulk packaging, while EGP20A-E3/54 is supplied in cut tape (CT) format. The packaging format does not affect electrical performance or compatibility.

Q: Why does SBYV27-50-E3/54 have a lower operating temperature minimum (-55°C vs. -65°C)?

A: SBYV27-50-E3/54 is specified for -55°C ~ 150°C junction temperature range, which is 10°C higher than the 2A01-T minimum. This part remains suitable for applications operating above -55°C. Applications requiring operation below -55°C must use EGP20A-E3/54, EGP20A, or 1N5400RLG, which maintain the -65°C lower limit.

Q: Is 1N5400RLG suitable for new product designs?

A: No. 1N5400RLG carries "Not For New Designs" product status classification. This part is reserved for maintenance and repair of existing systems. New designs should utilize EGP20A-E3/54, EGP20A, or GPP20A-E3/54, all classified as active products.

Q: What is the advantage of fast recovery diodes (EGP20A-E3/54, SBYV27-50-E3/54) over standard recovery (2A01-T, GPP20A-E3/54)?

A: Fast recovery diodes exhibit shorter reverse recovery time (50 ns or 15 ns versus >500ns), reducing switching losses and electromagnetic interference in high-frequency applications. Forward voltage is also reduced (950 mV or 1.07 V versus 1.1 V), improving efficiency. Standard recovery parts are adequate for low-frequency rectification applications.

Q: Are all substitute parts RoHS3 compliant?

A: GPP20A-E3/54, EGP20A-E3/54, SBYV27-50-E3/54, and 1N5400RLG are all ROHS3 compliant. EGP20A (Fairchild) does not specify RoHS status in the provided data. Verify RoHS compliance with the supplier if this certification is required for your application.

Q: Can 1N5400RLG (3 A) be used in place of 2A01-T (2 A) for current headroom?

A: Yes, 1N5400RLG provides higher current capacity (3 A) and maintains 50 V voltage rating. However, this part is classified "Not For New Designs" and exhibits higher reverse leakage (10 µA versus 5 µA). Use this part only for legacy system maintenance where the additional current capacity provides design margin.

Q: What packaging format should I select for production assembly?

A: For automated assembly, select cut tape (CT) format: EGP20A-E3/54 or SBYV27-50-E3/54. For manual assembly or low-volume applications, bulk packaging (EGP20A) is acceptable. GPP20A-E3/54 is supplied in tape & reel (TR) format, suitable for high-volume production. All formats are mechanically compatible with DO-15 through-hole footprints.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message