Phoenix Contact 2962586 Interface Module Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 2962586 is a 26-position interface module terminal block designed for screw connection to rectangular male connectors. This component facilitates signal and power distribution in industrial control applications with wire gauge compatibility from 16-26 AWG. The part maintains active product status with full RoHS3 compliance and unlimited moisture sensitivity rating, making it suitable for deployment in standard industrial environments operating between -20°C and 50°C.

Substitute parts are identified when equivalent functional performance can be maintained across the critical electrical and mechanical parameters that define this product category, specifically matching the 26-position configuration, screw connection interface, and rectangular male connector compatibility.

Substiute Parts

2962586

Phoenix ContactIn Stock: 10302962586 Datasheet

Current PartRFQ

2315052

Phoenix ContactIn Stock: 21102315052 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 2962586 is determined by the following critical parameters:

Primary Matching Criteria:

• 26-position configuration (maintains pin count and connector footprint compatibility)
• Screw connection process side interface (ensures field termination compatibility)
• Rectangular male connector control side (maintains mating interface with existing harnesses)
• RoHS3 compliance and active product status (ensures regulatory alignment and supply continuity)

Secondary Compatibility Parameters:

• Wire gauge range overlap (minimum 16 AWG support required for main part compatibility)
• Voltage rating minimum of 25VAC or 60VDC (maintains electrical safety margins)
• Current rating of 1 A per contact (meets or exceeds load requirements)
• Operating temperature range encompassing -20°C to 50°C (ensures thermal compatibility)

The substitute part 2315052 maintains all primary matching criteria and demonstrates compatibility across secondary parameters with documented differences in wire gauge range (12-24 AWG versus 16-26 AWG) and physical dimensions.

Parameter Comparison

Engineering Selection Recommendations

Both the Phoenix Contact 2962586 and 2315052 maintain active product status with full RoHS3 compliance, ensuring regulatory alignment and long-term supply availability. Selection between these parts is determined by application-specific wire gauge requirements and physical space constraints.

The 2962586 supports wire gauges from 16-26 AWG and is appropriate for applications utilizing smaller diameter conductors within this range. The 2315052 accommodates wire gauges from 12-24 AWG, providing compatibility with larger diameter conductors down to 12 AWG while maintaining the 24 AWG upper limit overlap with the main part.

Both parts deliver identical electrical performance with 1 A per-contact current rating and equivalent voltage specifications. The operating temperature range of -20°C to 50°C is identical across both parts. Physical dimensions differ between the two designs, with the 2962586 measuring 90.00mm length by 45.00mm width and the 2315052 measuring 57.10mm length by 69.01mm width. These dimensional differences reflect series-specific design characteristics (VARIOFACE UM versus VARIOFACE VIP) and must be evaluated against available mounting space in the target application.

Frequently Asked Questions (FAQ)

Q: Can the 2315052 substitute for the 2962586 in all applications?

A: Substitution is valid when the application wire gauge requirements fall within the 12-24 AWG range supported by the 2315052. Applications requiring 25-26 AWG conductor compatibility must use the 2962586. Physical space availability for the different dimensions must also be confirmed.

Q: What is the significance of the wire gauge range difference?

A: The 2962586 supports 16-26 AWG while the 2315052 supports 12-24 AWG. The 2315052 accommodates larger diameter conductors (12-14 AWG) not supported by the 2962586. The 2962586 accommodates smaller diameter conductors (25-26 AWG) not supported by the 2315052. The overlap range of 16-24 AWG is compatible with both parts.

Q: Are the voltage and current ratings equivalent?

A: Both parts deliver 1 A per-contact current rating. The 2962586 is rated for 25VAC or 60VDC. The 2315052 is rated for 60V. Applications requiring 25VAC operation must use the 2962586.

Q: What are the physical dimension differences?

A: The 2962586 measures 90.00mm (4.643") length by 45.00mm (1.772") width. The 2315052 measures 57.10mm (2.248") length by 69.01mm (2.717") width. These differences reflect distinct series designs and must be evaluated against available mounting space.

Q: Do both parts have identical compliance certifications?

A: Both parts are RoHS3 compliant with MSL rating of 1 (Unlimited) and maintain active product status. The 2962586 carries REACH Affected status while the 2315052 carries REACH Unaffected status. Regulatory requirements for the target application must be confirmed.

Q: What is the difference between VARIOFACE UM and VARIOFACE VIP series?

A: These represent distinct Phoenix Contact series within the VARIOFACE product line. The UM series (2962586) and VIP series (2315052) differ in physical dimensions, wire gauge support ranges, and design characteristics while maintaining functional compatibility across the 26-position rectangular male connector interface.