Phoenix Contact 2941714 SSR Relay - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 2941714 is a solid-state relay (SSR) module configured as SPST-NO (1 Form A) with a 9A load capacity and input voltage of 24VDC. Designed for AC load switching in the 110V to 550V range, this component is part of the EMG series and features DIN Rail mounting with screw terminal connections.

This part is classified as obsolete. Locating equivalent or substitute components is necessary to support system maintenance, design updates, or when original inventory becomes unavailable.

Substiute Parts

2941714

Phoenix ContactIn Stock: 11412941714 Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the Phoenix Contact 2941714 requires matching the following critical parameters:

• Circuit Configuration: SPST-NO (1 Form A) topology
• Input Voltage: 24VDC control signal
• Output Type: AC load switching capability
• Load Voltage Range: Minimum 110V to 550V compatibility
• Load Current: Minimum 9A rated capacity
• Mounting: DIN Rail form factor
• Termination: Screw terminal connections
• Compliance: RoHS Compliant status

No manufacturer-recommended substitutes have been provided for this part. Equivalent components must satisfy all parameters listed above to ensure functional and mechanical compatibility within the original application circuit.

Parameter Comparison

No substitute parts are currently available for comparison. When evaluating potential alternatives, ensure all parameters in the Key Parameters table are matched or exceeded by the candidate component.

Engineering Selection Recommendations

The Phoenix Contact 2941714 is obsolete. When selecting a replacement component:

• Verify that the substitute maintains SPST-NO circuit configuration and 24VDC input specification
• Confirm AC output capability with load voltage range of 110V to 550V minimum
• Ensure the substitute is rated for 9A continuous load current
• Validate DIN Rail mounting compatibility and screw terminal termination
• Confirm RoHS Compliant status for regulatory alignment

Component selection should be based on exact parameter matching rather than functional similarity alone, as SSR modules have specific electrical and mechanical integration requirements.

Frequently Asked Questions (FAQ)

Q: Why is the Phoenix Contact 2941714 difficult to source? A: This component is classified as obsolete, meaning Phoenix Contact has discontinued production. Original inventory may be limited or unavailable through standard distribution channels.

Q: What parameters must a substitute part match? A: A substitute must match the SPST-NO circuit configuration, 24VDC input voltage, AC output type, 110V–550V load voltage range, 9A load current rating, DIN Rail mounting, screw terminal termination, and RoHS Compliant status.

Q: Can I use a different input voltage SSR as a substitute? A: No. The 24VDC input specification is critical for control circuit compatibility. Substitutes with different input voltages will not function correctly in the original application.

Q: Are there mechanical compatibility concerns when substituting? A: Yes. DIN Rail mounting and screw terminal connections are mechanical requirements. The substitute module must fit the same mounting rail and accept the same wire gauges and terminal configurations.

Q: What does RoHS Compliant status mean for substitution? A: RoHS Compliance indicates the component meets restrictions on hazardous substances. Maintaining this status ensures regulatory alignment and environmental compliance in the target application.